by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail : airtech@airtechintl.com
y a = Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA 92647 USA
Economical vacuum bagging film
DESCRIPTION
Wrightlon 250Y vacuum bagging film has high elongation, flexibility and tensile strength. The enhanced
physical values allow for added security even in harsh environments. Wrightlon 250Y is well suited for
automotive, marine and other commercial vacuum bagging applications. It is ideal for both autoclave and
oven cures.
@ BENEFITS
+ Wide films save time and money spent seaming film for large parts.
+ Wider films reduce risk of scrap parts due to leakage at seams.
+ Reduce scrap risk due to vacuum loss with high physical properties.
@ TECHNICAL DATA
Test method
Material type Nylon copolymer
Elongation at break 400 % ASTM D 882
Tensile strength 6004.6 psi (41.4 MPa) ASTM D 882
Maximum use temperature 302 F (150 C)
Short term exposure 338 F (170 C)
Flammability (self extinguishing) No ATP-5034
Materials to avoid Strong oxidizers
Color Yellow
Thickness 0.002 inch (50 jam)
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
NOTES
+ Custom shapes and sizes are available, please contact Airtech for more information.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-11-06
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artec Iteration ne dclsine and buyer wave, any and all imped warts incuding without maton the pled warranties of marcha and of nes fr part useThe foemston contained heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
TECHNICAL DATA SHEE T
STRETCH- VAC 250
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV250_0 2.21_Issue1
STRETCH- VAC 250
Vacuum bagging film
Ideally suited to debulking and hot compaction applications
Features and Benefits
Highly conformable co-polymer film.
Will remain soft and pliable in cures up to
135 C/275 F.
Engineered for use with all standard 121 C/250 F
curing epoxy resin systems.
Particularly suited to debulking and hot compaction
cycles where softness and elongation are essential.
Can be heat seamed to meet any custom shape
requirements.
Not suitable for use with polyester or vinylester resins.
PROPERTIES
Maximum use temperature 135 C 275 F
Color Light blue
Tensile strength at break (ASTM D882) 55MPa 8000psi
Elongation at break (ASTM D882) 800%
Yield 16m /kg 78.3 ft /lb
AVAILABILITY
Thickness 50 m 0.002in
Widths Up to 3m (open) Up to 118in (open)
Formats available V sheet, sheet
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail : airtech@airtechintl.com
y a = Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA 92647 USA
Economical vacuum bagging film
DESCRIPTION
Wrightlon 250Y vacuum bagging film has high elongation, flexibility and tensile strength. The enhanced
physical values allow for added security even in harsh environments. Wrightlon 250Y is well suited for
automotive, marine and other commercial vacuum bagging applications. It is ideal for both autoclave and
oven cures.
@ BENEFITS
+ Wide films save time and money spent seaming film for large parts.
+ Wider films reduce risk of scrap parts due to leakage at seams.
+ Reduce scrap risk due to vacuum loss with high physical properties.
@ TECHNICAL DATA
Test method
Material type Nylon copolymer
Elongation at break 400 % ASTM D 882
Tensile strength 6004.6 psi (41.4 MPa) ASTM D 882
Maximum use temperature 302 F (150 C)
Short term exposure 338 F (170 C)
Flammability (self extinguishing) No ATP-5034
Materials to avoid Strong oxidizers
Color Yellow
Thickness 0.002 inch (50 jam)
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
NOTES
+ Custom shapes and sizes are available, please contact Airtech for more information.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-11-06
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artec Iteration ne dclsine and buyer wave, any and all imped warts incuding without maton the pled warranties of marcha and of nes fr part useThe foemston contained heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
TECHNICAL DATA SHEE T
STRETCH- VAC 250
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV250_0 2.21_Issue1
STRETCH- VAC 250
Vacuum bagging film
Ideally suited to debulking and hot compaction applications
Features and Benefits
Highly conformable co-polymer film.
Will remain soft and pliable in cures up to
135 C/275 F.
Engineered for use with all standard 121 C/250 F
curing epoxy resin systems.
Particularly suited to debulking and hot compaction
cycles where softness and elongation are essential.
Can be heat seamed to meet any custom shape
requirements.
Not suitable for use with polyester or vinylester resins.
PROPERTIES
Maximum use temperature 135 C 275 F
Color Light blue
Tensile strength at break (ASTM D882) 55MPa 8000psi
Elongation at break (ASTM D882) 800%
Yield 16m /kg 78.3 ft /lb
AVAILABILITY
Thickness 50 m 0.002in
Widths Up to 3m (open) Up to 118in (open)
Formats available V sheet, sheet
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet DAHLVAC MB80
Vacuum manifold for resin infusion
DESCRIPTION
Dahlvac MB80 is an easy to use vacuum source designed for resin infusion. The product can easily be attached
to the periphery of a mold using Airtac 2 Improved spray adhesive or Airhold 10 CBS double backed tape. The
internal spiral tube provides good vacuum flow and the outer layer of Dahltexx SP-2 allows breathability while
preventing resin from entering the vacuum channel.
@ BENEFITS
+ Easy to use and simplifies the infusion process.
. Highly breathable while preventing resin from entering the vacuum source.
+ Attaches easily to the mold using Airtac 2 Improved or Airhold 10 CBS double backed tape.
+ Aids in uniform resin distribution.
@ TECHNICAL DATA
Material type Dahltexx SP-2 fabric with PE Spiral Wrap
Color Blue
Maximum recommended use temperature 250 F (121 C)
@ SIZES
2.0 inches (5.08 cm) 100 feet (30.48 m)
< ef Ne es, F; - ; :
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet RELEASE EASE 234 TFP, 234 TFP-HP & 234 TFP-1
Porous PTFE coated fibreglass fabrics
lM DESCRIPTION
Release Ease 234 TFP is a porous PTFE coated glass fabric which will provide release from all conventional resin
systems. Porous products will allow excess resin, volatiles and trapped air to escape into the breather during cure
while non-porous products will retain resin. Release Ease products have a continuous service temperature to 288 C
(550 F).
Release Ease 234 TFP-HP has reduced PTFE content for increased porosity.
Release Ease 234 TFP-1 has reduced thickness of 40 tm (0.0016 inch).
@ BENEFITS
+ Porous PTFE coating makes fabric much easier to remove off of cured laminates, resulting in time saved.
+ Release Ease strips off cured laminates leaving a textured surface, reducing time spent hand finishing.
+ Fibreglass retains its strength through high temperature use for easier removal after cure.
M@ TECHNICAL DATA
Release Ease 234 TFP Release Ease 234 TFP-HP _ Release Ease 234 TFP-1
Maximum use temperature 288 C (550 F) 288 C (550 F) 288 C (550 F)
Fibre type Fibreglass Fibreglass Fibreglass
Coating type PTFE PTFE PTFE
Thickness 0.060 mm (0.0024 inch) 0.076 mm (0.003 inch) 0.040 mm (0.0016 inch)
Colour Brown Brown Brown
Cromael Recommended storage temperature is 5 C to 40 C (41 F to 104 F).
9 Store indoors in original packaging, do not stack rolls on end.
M@ SIZES
pith bength | Packaging
Release Ease 234 TFP 97 cm (38 inches) 91 m (100 yards) Troll
127 cm (50 inches) 91 m (100 yards) Troll
152 cm (60 inches) 91 m (100 yards) Troll
Release Ease 234 TFP-HP. 97 cm (38 inches) 91 m (100 yards) Troll
Release Ease 234 TFP-1 97 cm (38 inches) 91 m (100 yards) Troll
SUSTAINABILITY
&
SPE Recyclable
DSH packaging
wy
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Colour is subject to slight variation and does not affect performance.
+ Hot knife (sealed edge) slitting upon request with 1 roll minimum order quantity.
Last updated : 2025-05-18
Catalog position : Release fabrics & Peel plies
ste contin creo ue nding sarge beyond ot conta itech trator does ese pony for the peromnance fhe for ry parr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet AIR-ROLLER 232
Hand roller for sealant tape application
DESCRIPTION
Air-Roller 232 insures proper adhesion between film, sealant tape and tool. It is specially designed to save time and
labor.
Air-Roller 232 has an inert plastic roller, a steel frame and a wood handle.
Auto-Couple thermocouple is embedded between
double layers of sealant tape to ensure a proper vacuum seal
Last updated : 2023-02-09
Catalog position : Miscellaneous
by | Sep 27, 2025
Cytec lofi 51789
Process Materials Peel ply
Features
Lightweight nylon 6.6 which has been heat set and Approved on a range of OEM specifications for
scoured for use directly against laminates or bond composite manufacture and metal bonding.
lines. CYTEC does not recommend for use with phenolic resin
Imparts a very fine weave pattern upon removal from systems or prepreg as acid in the catalyst can break
the laminate. down nylon materials. Customers are advised to carry
Available coated and non-coated, depending on user out their own internal compatibility tests.
requirement. Manufactured by Precision Fabrics Group (PFG).
NAT – Scoured and heat set finish
10 – International Orange for easy identification
VLP Very Low Porosity finish
SRB – Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
GFR – Cross-linked, low transfer fluorocarbon finish for ease of release
Maximum use temperature 232 C 450 F
Color White, blue, orange and yellow
Fabric type Nylon
Fabric weight 62.7 /m? 1.8502/yd?
Standard width 1.47m 58in
Standard length 274.3m 300yd
Slit widths available
No special storage conditions required.
Handling of these products must conform to individual company guidelines and health and safety regulations.
ss i it ee lt tnt na ty te meget ete Tas
sce cy fc ra ad po penta Sel eee eed ety sees ome ree een oftor etagteasinerontr eerste
(See cetore a Oa ere sed i. ire ten pce ire i rer
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
by | Sep 27, 2025
Cytec lofi 51789
Process Materials Peel ply
Features
Lightweight nylon 6.6 which has been heat set and Approved on a range of OEM specifications for
scoured for use directly against laminates or bond composite manufacture and metal bonding.
lines. CYTEC does not recommend for use with phenolic resin
Imparts a very fine weave pattern upon removal from systems or prepreg as acid in the catalyst can break
the laminate. down nylon materials. Customers are advised to carry
Available coated and non-coated, depending on user out their own internal compatibility tests.
requirement. Manufactured by Precision Fabrics Group (PFG).
NAT – Scoured and heat set finish
10 – International Orange for easy identification
VLP Very Low Porosity finish
SRB – Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
GFR – Cross-linked, low transfer fluorocarbon finish for ease of release
Maximum use temperature 232 C 450 F
Color White, blue, orange and yellow
Fabric type Nylon
Fabric weight 62.7 /m? 1.8502/yd?
Standard width 1.47m 58in
Standard length 274.3m 300yd
Slit widths available
No special storage conditions required.
Handling of these products must conform to individual company guidelines and health and safety regulations.
ss i it ee lt tnt na ty te meget ete Tas
sce cy fc ra ad po penta Sel eee eed ety sees ome ree een oftor etagteasinerontr eerste
(See cetore a Oa ere sed i. ire ten pce ire i rer
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
by | Sep 27, 2025
Cytec lofi 51789
Process Materials Peel ply
Features
Lightweight nylon 6.6 which has been heat set and Approved on a range of OEM specifications for
scoured for use directly against laminates or bond composite manufacture and metal bonding.
lines. CYTEC does not recommend for use with phenolic resin
Imparts a very fine weave pattern upon removal from systems or prepreg as acid in the catalyst can break
the laminate. down nylon materials. Customers are advised to carry
Available coated and non-coated, depending on user out their own internal compatibility tests.
requirement. Manufactured by Precision Fabrics Group (PFG).
NAT – Scoured and heat set finish
10 – International Orange for easy identification
VLP Very Low Porosity finish
SRB – Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
GFR – Cross-linked, low transfer fluorocarbon finish for ease of release
Maximum use temperature 232 C 450 F
Color White, blue, orange and yellow
Fabric type Nylon
Fabric weight 62.7 /m? 1.8502/yd?
Standard width 1.47m 58in
Standard length 274.3m 300yd
Slit widths available
No special storage conditions required.
Handling of these products must conform to individual company guidelines and health and safety regulations.
ss i it ee lt tnt na ty te meget ete Tas
sce cy fc ra ad po penta Sel eee eed ety sees ome ree een oftor etagteasinerontr eerste
(See cetore a Oa ere sed i. ire ten pce ire i rer
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
