by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Jos Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. (CA92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
fH CDESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 um) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
f@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
ANC eerie ae Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films a
-Asthe conditions ormethed of se ncding storage, ae byond ou conto Antec tematlonl nc. does not assume ay responsi forth pesomnanc fit mate fr ny pat. The tes sds.
itech ntemationa ic dls and buyer wes aan sl pid warrants cudng without baton the pied wanes of mechan neo finer prc ese The nro conte erin
represents ypc properties and shoul ot be ed for specication purposes, Ay tansaton prove for you Convenience ny. The ofa language Engith andthe ecw Catoma USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtechintl.com
Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA92647 USA
Data Sheet DAHLAR RELEASE BAG 500
High temperature self releasing tubular bagging film
DESCRIPTION
Dahlar Release Bag 500 is a self releasing multi-layer bagging film for direct contact with prepreg for
fabrication of hollow parts. It exhibits superior strength, temperature resistance and vacuum integrity of
Airtech’s multi-layer film technology. This product exhibits excellent release of epoxy and polyester resins.
This product is also available in gusseted tubing (GT). Thanks to the gusset folding, Dahlar Release Bag 500 is
easier to position accurately in hollow parts. Upon application of pressure the bag will easily expand to fit to the
shape of the part which is very useful in applications where there are variations in the part diameter. This
development ensures even application of internal pressure in cases of small diameter parts, where the insertion
of a standard lay flat tube bagging film can be problematic.
@ BENEFITS
+ Multi-layer construction combines release and vacuum performance in a single material.
+ Easier to position accurately in hollow section, reduces cycle time, and improves quality.
+ Easier to remove after cure reducing cycle time.
@ TECHNICAL DATA
Test method
Material type ETFE, Nylon, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 8700 psi (60 MPa) ASTM D 882
Maximum use temperature 446 F (230 C)
Materials to avoid Compatible with most resin systems
Color Red
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available”
0.0027 inch (70 um) up to 8 inches (0.203 m) LFT, GT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
=Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-05-26
Catalog position : Bagging films A
|Asthe conditions or methods of ue, including storage are beyond our contro, itech Internationa, nc. doesnot assume any responsibilty forthe performance of his material for ary particular use. he materials sold 35. A
Airtech International, Inc, disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein A
eoresers typical properte and shoud not be vse for specication purpose Any tardaton provided for your convenience ony. The oc langwages Engish nd the fica ins alforaa, USA _O P.25
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Jos Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. (CA92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
fH CDESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 um) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
f@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
ANC eerie ae Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films a
-Asthe conditions ormethed of se ncding storage, ae byond ou conto Antec tematlonl nc. does not assume ay responsi forth pesomnanc fit mate fr ny pat. The tes sds.
itech ntemationa ic dls and buyer wes aan sl pid warrants cudng without baton the pied wanes of mechan neo finer prc ese The nro conte erin
represents ypc properties and shoul ot be ed for specication purposes, Ay tansaton prove for you Convenience ny. The ofa language Engith andthe ecw Catoma USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
DESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products.
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 tm) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
@ BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems.
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
DESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products.
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 tm) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
@ BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems.
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Jos Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. (CA92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
fH CDESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 um) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
f@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
ANC eerie ae Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films a
-Asthe conditions ormethed of se ncding storage, ae byond ou conto Antec tematlonl nc. does not assume ay responsi forth pesomnanc fit mate fr ny pat. The tes sds.
itech ntemationa ic dls and buyer wes aan sl pid warrants cudng without baton the pied wanes of mechan neo finer prc ese The nro conte erin
represents ypc properties and shoul ot be ed for specication purposes, Ay tansaton prove for you Convenience ny. The ofa language Engith andthe ecw Catoma USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Jos Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. (CA92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
fH CDESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 um) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
f@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
ANC eerie ae Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films a
-Asthe conditions ormethed of se ncding storage, ae byond ou conto Antec tematlonl nc. does not assume ay responsi forth pesomnanc fit mate fr ny pat. The tes sds.
itech ntemationa ic dls and buyer wes aan sl pid warrants cudng without baton the pied wanes of mechan neo finer prc ese The nro conte erin
represents ypc properties and shoul ot be ed for specication purposes, Ay tansaton prove for you Convenience ny. The ofa language Engith andthe ecw Catoma USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
DESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products.
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 tm) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
@ BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems.
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Jos Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. (CA92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
fH CDESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 um) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
f@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
ANC eerie ae Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films a
-Asthe conditions ormethed of se ncding storage, ae byond ou conto Antec tematlonl nc. does not assume ay responsi forth pesomnanc fit mate fr ny pat. The tes sds.
itech ntemationa ic dls and buyer wes aan sl pid warrants cudng without baton the pied wanes of mechan neo finer prc ese The nro conte erin
represents ypc properties and shoul ot be ed for specication purposes, Ay tansaton prove for you Convenience ny. The ofa language Engith andthe ecw Catoma USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Jos Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. (CA92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
fH CDESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 um) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
f@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
ANC eerie ae Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films a
-Asthe conditions ormethed of se ncding storage, ae byond ou conto Antec tematlonl nc. does not assume ay responsi forth pesomnanc fit mate fr ny pat. The tes sds.
itech ntemationa ic dls and buyer wes aan sl pid warrants cudng without baton the pied wanes of mechan neo finer prc ese The nro conte erin
represents ypc properties and shoul ot be ed for specication purposes, Ay tansaton prove for you Convenience ny. The ofa language Engith andthe ecw Catoma USA
