08RBG2601A_TDS.pdf

5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet DAHLAR RELEASE BAG 125
Economical vacuum bag with excellent release properties
DESCRIPTION
Dahlar Release Bag 125 is an economical film designed for both vacuum bagging and release applications. It
can be used for cures up to 285 F (140 C) and will release from most resins associated with aerospace, marine,
and recreational products. This formulation has improved tear resistance and elongation over products.
previously offered as low temperature, multiple process films.
Dahlar Release Bag 125 (0.001 inch or 25 tm) is the ideal release film for polyester or vinyl ester resins as well as
epoxies and phenolics. See the release film section. It is also offered with our embossed, cracked ice pattern
making it a breather, release film and vacuum bag all-in-one.
@ BENEFITS
+ Reduce inventory cost with economical single choice film option for use as bag or release film.
+ Tough, strong, and good elongation make bagging much easier than with other low cost products.
+ Embossed version makes compaction and debulking faster and cheaper.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 400 % ASTM D 882
Tensile strength 9400 psi (65 MPa) ASTM D 882
Maximum use temperature 285 F (140 C)
Materials to avoid Compatible with most resin systems.
Color Green
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
from 0.001 to 0.003 inch (25 – 75 um) up to 260 inches (6.6 m) SHT, CF, LFT
from 0.002 to 0.003 inch (50 – 75 um) up to 157 inches (4.0 m) SHT (Embossed Film)
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES +The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a demo video of Dahlar Release Bag 125 in the "Media Center" on our website. Last updated : 2020-05-26 Catalog position : Bagging films -Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA