17AMT242BD_SDS.pdf

by | Sep 27, 2025

Able Industrial Products, Inc.
SAF’ETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF
PRODUCT:
SUPPLIER’S DETAILS:
EMERGENCY CONTACT:
AMTCAT 242-03 Purple GT CA6772
Curing catalyst for condensation base
Able Industrial Products, Inc.
2006 S Baker Ave
Ontario, Calif. 91761
Telephone: (800) 423-7008
909-930-158s
Fax: 909-930-1587
CHEMTREC (24 Hours): 1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
PR ECA UN O NA R Y STA TE M ENTS
IPRFVENnONJ
Flammable – Category 3
Acute Toxicity, Oral – Category 5
STOT, Repeated Exposure – Category 2 (Bladder)
Not Classified
Warning
H226: Flammable liquid and vapour
H303: May be harmful if swallowed
H373: May cause damage to organs, bladder, through prolonged
or repeated exposure by ingestion.
P210: Keep away from heat/sparks/open flames/hot sufaces – No
smoking
P233: Keep container tightly closed
–
AMTCNT 242 GHS CA6772 printed: I2l30l2I page 1 of 6

Able Industrial Products, Inc.
SAF’ETY DATA SHEET
P240: Ground/bond container and receiving equipment
P24 1 : Usc cxplosion-proof elcctrical/ventilating/lig ht/…/equipment
P242: Use only non-sparking tools
P243: Take precautionary measures against static discharge
P260: Do not breathe d ust/f u m e/gas/m ist/va po u rs/s pray
P2B0 : Wea r protective gloves/protective cloth ing/eye
[RESPONSE]
IST)RAGE]
IDrsPosALJ
P312: Call a POISON CENTER or doctor/physician if you feel
unwell
P314: Get Medical advice/attention if you feel unwell
P370+378: In case of fire, use an Class ABC dry extinguisher for
extinction
P303+361+353: lF ON SKIN (or hair): Remove/Take off
immediately all contaminated clothing. Rinse skin with
water/shower
P403+P235-Store in a well-ventilated place. Keep cool.
P501-Dispose of contents/container through a waste management
company authorized by the local government,
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
Mixture
CAS# (7p)
P he ny ltri meth oxys i la ne
Dimethyld i neodeca noatetin
2996-92-r
68928-76-7
25-35
r-4
4. FIRST AID MEASURES
TNGESTION:
SKTN CONTACT:
TNHALATION:
Rinse with water. If swallowed: Call a poison center or
doctor/physican if you fell unwell. Never give anything by mouth to
an unconscious person.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
Remove to fresh air. If breathing is difficult, give oxygen. Call a
physicianif svmptoms develoo or persist
AMTCAT 242 GHS CA6772 printed: I2l30l2L page 2 of 6

Able Industrial Products, Inc
SAFETY DATA SHEET
EYE CONTACT:
PROTECTION FOR FIRST-
AIDERS:
Immediately flush with COOL water for 15 minutes; Call a physician
if irritation persists.
A rescuer should wear personal protective equipment, sttch as
rubber gloves and air-tiqht qogqles
5. FIRE-FIGHTING MEASURES
S UITA B L E EXTI N G UISHIN G
MEDIA:
SPECIFIC FIRE HAZARDS:
FTR EFIG HTER EQUIPMENT:
Foam, Carbon Dioxide, Dry Chemical
Fire will form hazordous combustion gascs of Carbon dioxide(COz),
Carbon Monoxide(CO), and Nitrogen Oxides(NOx)
Product contains silicone, which is known to produce formaldehyde
and benzene when temperatures reach in excess of 150oC.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
Do not breathe in fumes, Wear respirator and all protective
coverinqs.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECATTONS.
PROTECTIVE EQ UIPMENT AND
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Keep unnecessary personnel out of the way. Eliminate all ignition
sources. Safety glasses and gloves are suggested to prevent eye
and skin contact. Provide sufficient ventilation.
Prevent product from entering drains.
Absorb spilled material with suitable absorbent (e.9. rag, dry sand,
clay absorbent) and disposed of, in accordance with appropriate
laws and regulations.
7. HANDLING AND STORAGE
HANDLING:
STORAGE:
Wear protective equipment; Use in a well-ventilated area; Avoid
contact with skin and eyes. Ground/bond container and receiving
equipment. Use only non-sparking tools. Take precautionary
measures against static discharge. Use explosion-proof
electrical/ventilating/l ig ht/…/eq u ipment.
Keep container tightly closed. Store in a cool, dry place. Keep away
from oxidizinq material.
B. EXPOSURE CONTROLSAND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous CAS# b
Methanol; decomposition product 67-56-7 200 ppm Bhr TWA
*PEL/
OSHA
Phenyltrimethoxysilane 2996-92-1 50ppm TWA
*PEL/OSHA : Permissible Exposure Limit/ Occupational Safety and Health Administration
AMTCAT 242 GHS CA6772 printed: t2l30l2l page 3 of 6

Able Industrial Products, Inc.
SAFETY DATA SHEET
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUIPMENT:
R ESPI RATO R Y P R OTECTIO N :
HAND PROTECTION
EYE PROTECNON
SKIN AND BODY PROTECNON
Install a closed system or local exhaust as possible so that workers
should not be exposed directly. Also install safety shower and eye
bath
Vapor respirator. Follow local and national regulations.
Protectrve gloves
Wear safety glasses or goggles, Face shield if situation requires
Protective clothinq if situation requires
9. PHYSICAL AND CHEMICAL PROPERTIFS
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POINT:
BOILING POINT RANGE:
FLASH POINT:
EVAPORATTON RATE:
FLA M MA B I L I TY(so I i d / g a s) :
EXPLOSION LIMITS:
UPPER
LOWER
VAPOR PRESSURE:
VAPOR DENSTTY:
RELATIVE DENSITY:
SOLUBILITY:
PA RTITTO N CO EFFI CI E N T: N.
ocTANOL/WATER:
A UTO.IG NITION TEM P E RATU R E :
DECOMPOSITION
TEMPERATURE:
VISCOSITY:
Liquid
Characteristic ester odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>750F
Not Available
Not Available
Not Available
Not Available
Not Available
All vapors are denser than air
L04 glmL
Not soluble in water
NoL Available
Not Available
> 1500c
50-100cP
10. STABILITY AND REACTIVITY
REACTIVITY:
CHEMILAL STABTLTTY:
HAZRDOUS REACTIONS:
CONDITIONS TO AVOTD:
HAA RDO US D ECOM POSITION
PRODUCTS:
Product is designed to react with a silanol-containing base in the
presence of moisture and cure. Will react with the moisture in the
air and harden if left uncapped.
Stable in the absence of contamination or moisture
Upon contact with water, the product will release methanol, which
have some health ramifications associated with it. SEE
TOXICOLOGICAL IN FORMATION.
Avoid contact with water and strong acid. Keep away from sources
of heat as well as sources of ignition
Hazardous combustion gases of Carbon dioxide(COz), Carbon
Monoxide(CO), and Nitrogen Oxides(NOx)
Product contains silicone, which is known to produce formaldehyde
and benzene when temperatures reach in excess of 150oC.
Formaldehyde is a known skin, eye, and throat irritant as well as a
AMTCAT 242 GHS CA6772 printed: I2l30l2I page 4 of 6

Able Industrial Products, Inc
SAF’ETY DATA SHEET
INCOMPATIBILITY:
potential cancer hazard. Benzene is a known carcinogen.
Water, acids, alkalis, iron, may react violently with electrophiles
such as ferric chloride
1 1. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY:
sKI N CO R R OSIO N / r R Rr TA TIO N :
EYE DAMAGEfiRRITATTON:
RESPIRATORY OR SKIN
SENSITATION:
GERM CELL MUTAGENICITY:
CARCINOGENICITY:
REPROD U CTIVE TOXICITY:
STOST- SIN G L E EXPOS U R E :
STOST- REPEATED EXPOSURE:
ASPIRATION HAZARD:
Calculated from known values for mixture
Oral – LDso(Rat): >2000mgikg
Prolonged skin contact may cause temporary irritation.
Direct contact with eyes may cause temporary irritation.
Not Available
Not Available
Not Available
Not Available
Not Available
Category 2 hazard – for Methanol; decomposition product (< 1olo): May cause conjunctivitis, dizziness, sleeplessness, and gastrointestinal and optical disturbances. Category 2 hazard - for phenyltrimethoxysilane: May cause damage to organs (bladder) through prolonged or repeated exposure. Not Available 12. ECOLOGICAL INFORMATION ECOTOXTCITY: PERSISTE N CE/ D EG RA DA BI LITY: BTOA C C U M U LATIVE PO TEN TIA L : MOBILITY TN SOTL: Do not allow to enter soil, waterways or waste water canal. It is not allowed to be released into biological sewage treatment plants. Ecological data is not available, Not Available Not Available Not Available 13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. 14. TRANSPORT INFORMATION UN/NA Number: DOTSHIPPING NAME: DOT HAZARD CLASS: IMDG _ P.S.N.: EMDG _ CLASS: uN1993. "FLAMMABLE LIQUID N.O.S. - Silicone Mixture Contains Methanol" Flammable Liquid. FLAMMABLE LIQUID N.O.S. (Methanol) Class 3 AMTCAT 242 GHS CA6772 printed: I2l30l2L page 5 of 6 Able Industrial Products, Inc. SAF'ETY DATA SHEET IMDG _ PACKING GROUP: IMDG - Marine Pollutant: IATA - P.S.N.: IATA - CLASS: IATA _ PACKING GROUP: PGIII No FLAMMABLE LIQUID N.O.S. (Methanol) Class 3 PGIII This prodrrct and its ingredients are NOT considered dangerous goods according to the UN Model Requlations, ADR, RID, and the ADN. 15. REGULATORY INFORMATION US REGULATIONS US SARA REPORTING REQUIREMENIS.'The components of this product are subject to the reporting requirements of Section 302,304, and 313 of Title III of the Superfund Amendments and Reauthorization Act, and are listed as follows: Hazardous Ingredient Phenyltrimethoxysila ne Dimethyld ineodeca noatetin SARA 302 (40 cFR 3ss, Appe{l1ry.4) No No SARA 304 (40 CFR Table 302. SARA 313 (40 cFR 372.65) No No No No U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for the components of this product. The default Federal MSDS submission and inventory requirement filing threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20 U.s. cERcLA REPORTABLE QUANTITY (RQ): None SARA 311/312(40 CFR 37O) HAZARDS.'Acute: Yes, Chronic: Yes, Fire: Yes, Pressure: No CALIFORNI{ @ROPO$TION 65,); Neither this product nor its ingredients are listed TSCA INVENTORY STATUS: These materials or all of their contents are listed on the Toxic Substances Control Act (TSCA). CANADIAN DSL/NDSL INVENTORY:The components of this product are on the DSL or NDSL Inventories. AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES(AICS) STATUS: The components of this product are listed on the AiCS except: None 16. OTHER INFORMATION Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of Llte producL's hazardous ingredients, whose rnartulacturer identiLy we wish lo rernairr anonymous lor competitive reasons. Section B Exposure Limits attained from www.osha.gov and www.aiha.org We believe the above information is correct as of the date of this MSDS. However, as this information and the conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user's obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is hereby rnade. Date Created/Revised : 21 5 I 2020 AMTCAT 242 GHS CA6772 printed: I2l30l2I page 6 of 6

17AMT135PBD_SDS.pdf

by | Sep 27, 2025

Able Industrial Products, Inc.
SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
TR.ADE NAME:
OTHER MEANS OF
TDENTTFICATION:
RECOMMENDED USE OF
PRODUCT:
SUPPLIERS DETAILS:
AMTCATl35P
Curing Agent for Mold-making Rubber
Able Industrial Products, Inc.
2006 S Baker Ave, Ontario, CA 91761
Telephone: (800) 423-7008 (909)930-1585
Fax: (909) 930-1587
EMERGENCY CONTACT:
2, HAZARDS IDENTIFICATION
CHEMTREC Hours1-800-424-9300
GHS CLASSIFICATION
PHYSIAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
PR ECA UNONAR Y STATEM EN TS
IPREVENTIONJ
Not Classified
Skin Irritation/Corrosion – Category 2
Serious Eye Damage/Eye Irritation – Category 2A
Specific Target Organ Systemic Toxicity (SE) – Category 3
Not Classified
Warning
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
P26 1 : Avoid breath ing d ust/fu me/gas/m ist/va pors/spray
P264: Wash thoroughly after handling
P271: Use only outdoors or in a well-ventilated area
P2B0 : Wea r protective g loves/protective cloth i n g/eye
p rotection/face protection.
I
I
GHS CA2135 printed: 0L1t712020 page 1 of 6

Able Industrial Products, Inc.
SAFETY DATA SHEET
[RESPONSEJ
[sroRAGEJ
IDrsPosALJ
P302+352: IF ON SKIN: Wash with soap and water
P305+P351+P338: IF IN EYES – Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
P312: Call a POISON CENTER or doctor/physician if you feel
unwell
P321: Specific treatment (see … on this label)
P332+P313-If skin irritation occurs: Get medical advice/attention.
P337+P3 13-If eye irritation persists: Get medical advice/attention.
P362: Take off contaminated clothing and wash before reuse
P403+233: Store in a well ventilated place. Keep container tightly
closed
P405: Store locked up
P501-Dispose of contents/container through a waste management
company authorized by the local government.
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
Mixture
CAS#
Siloxanes and Silicones, di-Me,
hydrogen terminated
70900-21-9 5-15
25-35
1-5
Methylhydrosiloxane-dimethylsiloxane 69013-23-6
copolymer, Hydride Terminated
Tetravinyltetramethylcyclotetrasiloxane 2554-06-5
4. FIRST AID MEASURES
INGESTION:
SKIN CONTACT:
INHALATION:
EYE CONTACT:
PROTECTION FOR FTRST.
AIDERS: rubber qloves and air-tiqht qoqqles
Never give anything by mouth to an unconscious person, Rinse
mouth out with water. Seek medical attention; Do NOT induce
vomiting.
Remove contaminated clothing immediately and dispose of safely
When in contact with the skin, clean with soap and water.
No first aid should be needed. Remove to fresh air. If not
breathing, give artificial respiration
Immediately flush with COOL water for 15 minutes; Call a
physician if irritation persists,
A rescuer should wear personal protective equipment, such as
5. FIRE-FIGHTING MEASURES
GHS CA2135 printed: 0I1I712020 page 2 of 6

Able Industrial Products, Inc.
SAFETY DATA SHEET
SUITABLE EXTING UISHING
MEDIA:
SPECIFIC FIRE HAARDS:
FIREFIGHTER Wear resoirator and all orotectivecoveri
Foam, Carbon Dioxide, Dry Chemical
Fire will form hazardous combustion gases of Carbon dioxide(COz)
and Carbon Monoxide(CO)
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150oC.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECATIONS,
PROTECTIVE EQ UIPMENT A N D
EMERGENCY:
ENVIRONMENTAL
PRECAUTTONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains,
Disoose of in accordance with laws and requlations
7, HANDLING AND STORAGE
HANDLING:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes.
Keep container tightly closed. Store in a cool, dry place. Keep
away from oxidizing material, in a well-ventilated area. Store
locked up.
B. EXPOSURE CONTROLS AND PERSONAL PROTECTION
EXPOSURE LIMITS:
Uezar4quq lrg-tedlert. qV
Tetravinyltetramethylcyclotetrasiloxane 2554-06-5
ENGINEERING CONTROLS: None Available
b
0.1 mg/m^3 REL/NIOSH
PERSONAL PROTECTIVE
EQUIPMENT:
R ES PIRATO R Y PROTECTION :
HAND PROTECTION
EYE PROTEAION
SKIN AND BODY PROTECNON
No required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
Protective clothinq if situation reouires
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTTNG POTNT:
Liquid
No Odor
Not Available
Not Available
Not Available
GHS CA2135 printed: 0L11712020 page 3 of 6

Able Industrial Products, Inc.
SAFETY DATA SHEET
BOILING POINT RANGE:
FLASH POINT:
EVAPORATION RATE:
FLA M MA Br LITY(so I i d /
ga s) :
EXPLOSION LIMITS:
UPPER
LOWER
VAPOR PRESSURE:
VAPOR DENSITY:
RELATIVE DENSTTY:
SOLUBTLITY:
PARTTTION CO EFFICI ENT: N –
OCTANOL/WATER:
A UTO. IG NITIO N TE M PERA TU R E :
DECOMPO$TION
TEMPERATURE:
VTSCOSITY:
Not Applicable, will decompose before it will boil
>2050F (Setaflash)
Not Available
Not Available
Not Available
Not Available
<0.1mbar @ 6BoF All vapors are denser than air 1,0 g/ml Not soluble in water Not Available Not Available > 1500c
Not Available
10. STABILIry AND REACTIVITY
REACTTVITY:
CHEMICAL STABTLIW:
HAZARDOUS REACTTONS:
CONDITIONS TO AVOTD:
HAZAR DO US DECO M PO$TION
PRODUCTS:
TNCOMPATTBILITY:
Product is designed to react with its counterpart base containing
vinyl functional groups in the presence of a platinum catalyst.
Stable in the absence of contamination
None
Avoid contact with strong acid.
Hazardous combustion gases of Carbon dioxide(COz), Carbon
Monoxide(CO), SiOz, Contact with acids or bases releases
flammable hydrogen gas,
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 1500C.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
Acids.alkalis
1 1. TOXICOLOGICAL INFORMATION
ACUTE TOXTCITY:
sKrN co R R osr oNfi R RrTA TrO N :
EYE DA MA G E/IR R ITA TIO N :
RESPIRATORY OR SKIN
SENSITATTON:
GERM CELL MUTAGENICTTY:
CARCTNOGENICITY:
REPRODUCTIVE TOXICITY:
Acute Toxicity Estimate (ATE) based on ingredient’s known toxicity
*Oral.
– LDso(Rat): L5,440mglkg
Siloxanes and Silicones, di-Me, hydrogen terminated,
Methylhydrosiloxane-dimethylsiloxane copolymer, Hydride
Terminated are listed to cause skin irritation.
Siloxanes and Silicones, di-Me, hydrogen terminated,
Methylhydrosiloxane-dimethylsiloxane copolymer, Hydride
Terminated, and Tetravinyltetramethylcyclotetrasiloxane are listed
to cause serious eye irritation.
Not Available
Not Available
Not Available
Not Available
GHS CA2135 printed: 0L11712020 page 4 of 6

Able Industrial Products, Inc
SAFETY DATA SHEET
STOST- SINGLE EXPOSURE:
STOST. REPEATED EXPOSURE:
ASPIRATION HAARD:
Siloxanes and Silicones, di-Me, hydrogen terminated,
Methyl hyd rosiloxane-dimethylsiloxane copolymer, Hydride
Terminated are listed to may cause respiratory irritation through
inhalation
Not Available
Not Available
12. ECOLOGICAL INFORMATION
ECOTOXICITY:
P E R SI STE N C E/ D E G RA DA BT LITY:
BTOA CCU M U LA TIVE POTE N TIA L :
MOBTLITY IN SOIL:
Do not allow to enter soil, waterways or waste water canal. It is
not allowed to be released into biological sewage treatment
plants. Ecological data is not available.
Not Available
Not Available
Not Available
13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a
chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local
regulations when disposing of the substance.
14. TRANSPORT INFORMATION
UN/NA Number:
DOT SHTPPING NAME:
DOT HAZARD CLASS:
IMDG –
P.S,N.:
IMDG –
CLASS:
IMDG –
PACKING GROUP:
IMDG – Marine Pollutant:
IATA. P.S.N.:
IATA. CLASS:
IATA –
PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the tlN Model
Requlations. ADR, RID, and the ADN.
15. REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTING REQUIREMENIS,’The components of this product are subject to the reporting
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 cFR 35′
Appendrx A)
SARA 304
(40 CFR Table
302.4)
SARA 313
(40 cFR 372,6s)
GHS CA2135 printed: 0I1I712020 page 5 of 6

Able Industrial Products, Inc.
SAFETY DATA SHEET
Siloxanes and Silicones, di-Me, hydrogen No
terminated
Methylhydrosiloxane-dimethylsiloxane No
copolymer, Hydride Terminated
Tetravinyltetramethylcyclotetrasiloxane No
No
No
No
No
NoNo
U,S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.s, cERcLA REPORTABLE QUANTITY (RQ): None
SARA 371/312(40 CFR 37O) HAZARDS: Acute: No, Chronic: No, Fire: No, Pressure: No
CALIFORNIA. (PROPO$TION 65,).’Neither this product nor its ingredients are listed
TSCA INVENTORY STATUS: These materials or all of their contents are listed on the Toxic Substances
ControlAct (TSCA).
CANADIAN DSL/NDSL INVENTORI;The components of this product are on the DSL or NDSL
Inventories,
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES(AICS) STATUS: The components of this
product are listed on the AICS
KOREAN INVENTORY: The components of this product are listed or exempted.
16. OTHER INFORMATION
HMIS Rating: Health-1, Fire-0, Reactive-O
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made.
Date Created/Revised: Il 17 12020 Made By: Rick Viramontes
GHS CA2135 printed: 011t712020 page 6 of 6

17AMT135PAD_SDS.pdf

by | Sep 27, 2025

Able Industrial Products, Inc.
SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF
PRODUCT:
SUPPLIER’S DETAILS:
EMERGENCY CONTACT:
AMT135P
Mold-making Rubber
Able Industrial Products Inc.
2006 S Baker Ave, Onatrio Ca.9I76L
Telephone: (800) 423-7008
(909)930-1s85 Fax: (909) 930-1s87
CHEMTREC (24 Hours): 1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATTON
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
PR ECA UTIONA R Y STATEM EN TS
IPREVENTIONJ
IRESPONSEJ
[sroRAGEJ
[DISPOSALJ
Not Classified
Not Classified
Not Classified
one
one
one
one
one
one
N
N
N
N
N
N
None
3. COMPOSTTION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
Mixture
CAS#
None
GHS GT2135 printed: 0I11712020 page 1 of 5

Able IndustrialProducts , Inc.
SAFETY DATA SHEET
4. FIRST AID MEASURES
INGESTTON:
SKIN CONTACT:
INHALATION:
EYE CONTACT:
PROTECTION FOR FIRST-
AIDERS:
Seek medical attention; Do NOT induce vomiting.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
No first aid should be needed. Remove to fresh air.
Immediately flush with COOL water for 15 minutes; Call a physician
if irritation persists.
A rescuer should wear personal protective equipment, such as
rubber gloves and air-tight goggles
5. FIRE-FIGHTING MEASURES
SUITA B L E EXTIN G UISHIN G
MEDIA:
SPECIFIC FIRE HAZARDS:
FIREFIGHTER EQUIPMENT:
Foam, Carbon Dioxide, Dry Chemical
Fire will form hazardous combustion gases of Carbon dioxide(COz)
and Carbon Monoxide(CO)
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
Wear respirator and all protective coverinqs.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECATTONS,
PROTECTIVE EQ UIPMENT AN D
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains.
Absorb spilled material with suitable absorbent (e,9.
clay absorbent) and disposed of, in accordance with
laws and regulations.
rag, dry sand,
appropriate
7. HANDLING AND STORAGE
HANDLING:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes.
Keep container tightly closed. Store in a cool, dry place, Keep away
from oxidizinq material.
B. EXPOSURE CONTROLS AND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous CAS#
inlt/. e! U(
L
None
GHS GT2135 printed: 0t1I712020 page 2 of 5

Able Industrial Products, Inc.
SAFETY DATA SHEET
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUIPMENT:
R ES PI RATO R Y PR OTECTIO N :
HAND PROTECTION
EYE PROTECTION
SKIN AND BODY PROTECNON
None Available
No required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
Protective clothinq if situation requires
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POTNT:
BOILING POINT RANGE:
FLASH POINT:
EVAPORATTON RATE:
FLA M MA B I L I TY(so I i d /
g a s) :
EXPLOSION LIMITS:
UPPER
LOWER
VAPOR PRESSURE:
UAPOR DENSTTY:
RELATIVE DENSITY:
SOLUBILITM
PA RTITIO N CO E FFICI E N T: N –
ocTANOL/WATER:
A UTO-IGNITIO N TEM PE RATU R E :
DECOMPO$TION
TEMPERATURE:
VTSCOSITY:
Flowable Paste
No Odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>205oF (Setaflash)
Not Available
Not Available
Not Available
Not Available
<0.1mbar @ 6BoF All vapors are denser than air 1.0 g/ml Not soluble in water Not Available Not Available >1500c
Not Available
10. STABILITY AND REACTIVITY
REACTTVITY:
CHEMICAL STABILITY:
HAZARDOUS REACTTONS:
CONDITIONS TO AVOID:
HAZA RDOUS D ECO M POSITION
PRODUCTS:
Product is designed to react with a silicone hydride curing agent in
the presence of a platinum catalyst.
Stable in the absence of contamination
None
Avoid contact with strong acid.
Hazardous combustion gases of Carbon dioxide(COz), Carbon
Monoxide(CO), SiOz.
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
TNCOMPATIBTLITY: Acidsalkalis
1 1. TOXICOLOGICAL INFORMATION
GHS GT2135 printed: 0L1I712020 page 3 of 5

Able Industrial Products, Inc.
SAFETY DATA SHEET
ACUTE TOXICITY:
sKI N CO R R OSr O N / r R Rr TATIO N :
EYE DAMAGEfiRRITATION:
RESPIRATORY OR SKIN
SENSITATION:
GERM CELL MUTAGENICTTY:
CARCINOGENICITY:
R E P R O D U CTI VE TOXICITY:
STOST- SINGLE EXPOSURE:
STOST. REPEATED EXPOSURE:
ASPIRATION HAZARD:
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
12. ECOLOGICAL INFORMATION
ECOTOXICTTY:
P E R SISTE N C E/ D E G RA DA BI LI TY:
BIOA CC U M U LATI VE POTEN TIA L :
MOBILITY IN SOIL:
Do not allow to enter soil, waterways or waste water canal, It is
not allowed to be released into biological sewage treatment plants.
Ecological data is not available
Not Available
Not Available
Not Available
13, DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations
when disposing of the substance.
14. TRANSPORT INFORMATION
UN/NA Number:
DOTSHTPPING NAME:
DOT HAZARD CLASS:
IMDG –
P.S.N.:
LMDG –
CLASS:
hMDG –
PACKING GROUP:
IMDG –
Marine Pollutant:
IATA. P,S.N.:
IATA – CLASS:
IATA – PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Resulations, ADR,RID, and the ADN.
15, REGULATORY INFORMATION
GHS GT2135 printed: 0I1L712020 page 4 of 5

Able Industrial Products, Inc.
SAFETY DATA SHEET
US REGULATIONS
US SARA REPORTING REQUIREMENIS.’The components of this product are subject to the repofting
requirements of Section 302,304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient
None
SARA 302
(40 cFR 355
SARA 304 SARA 313
(40 CFR Table (40 CFR 372,6s)
Jq2_.9
No NoNo
U.S, SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U,s. CEROLA REPORTABLE QUANTITY
(RQ): None
SARA 311/312(40 CFR 370) HAZARDS: Acute: No, Chronic: No, Fire: No, Pressure: No
CALIFORNIA, (PROPO$TION 65,).’Neither this product nor its ingredients are listed
TSCA INVENTORY STATLIS: These materials or all of their contents are listed on the Toxic Substanc s
Control Act (TSCA),
CANADIAN DSL/NDSL INVENTORY:Te components of this product are on the DSL or NDSL
Inventories.
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES(AICS) STATUS: The components of this
product are listed on the AICS
KOREAN INVENTORY:ThC COMoonents of this oroduct are listed or exempted
16. OTHER INFORMATION
HMIS Rating: Health-1, Fire-O, Reactive-O
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made,
Date Created/Revised: Ll L7 12020 Made By: Rick Viramontes
GHS GT2135 printed: 0UL712020 page 5 of 5

17AIRPAC_SDS.pdf

by | Sep 27, 2025

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Airpac 15 A
Relevant identified uses of the substance or mixture and uses advised against
General use: Two part RTV silicone
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid, pasty
Color: brownish
Odor: odorless
Classification: This material is classified as not hazardous.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Hazards not otherwise classified
Direct contact may cause skin and eyes reddening and irritation.
Overheating released mist or vapors can irritate the respiratory tracts.
In case of ingestion gastrointestinal irritation.
Special danger of slipping by leaking/spilling product.
see section 11: Toxicological information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 2 of 7
3. Composition / Information on ingredients
Chemical characterization:Organopolysiloxane mixture and Quartz (SiO2) (CAS 14808-60-7).
The maximum workplace exposure limits are, where necessary, listed in section 8.
4. First aid measures
In case of inhalation: Move victim to fresh air; if necessary, provide artificial respiration or oxygen. Immediately get
medical attention.
Following skin contact:Thoroughly wash skin with soap and water. Change contaminated clothing. In case of skin
irritation, consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart.
In case of troubles or persistent symptoms, consult an opthalmologist.
After swallowing: Seek medical attention. Do not induce vomiting without medical assistance. Never give
anything by mouth to an unconscious person. Rinse mouth.
Most important symptoms/effects, acute and delayed
In case of inhalation: Overheating released mist or vapors can irritate the respiratory tracts.
In case of ingestion: Gastrointestinal irritation
After contact with skin: Product can cause slight irritation.
After eye contact: Product can cause slight irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:374 F (o.c.)
Auto-ignition temperature:No data available
Suitable extinguishing media:Carbon dioxide, alcohol resistant foam, dry chemical powder, water spray jet.
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. May form dangerous gases and vapors
in case of fire.
In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon
compounds, formaldehyde, carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Heating causes rise in pressure with risk of bursting. Cool
endangered containers with water spray and, if possible, remove from danger zone. Fight fire
from a safe distance. Stay upwind/keep distance from source. Use water spray jet to knock
down vapors. Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions: Eliminate all ignition sources if safe to do so. Avoid the formation of aerosol/vapors. Avoid
generation of dust. Avoid inhalation and contact with skin and eyes. Wear appropriate protective
equipment.
In case of dust/vapor/Aerosol: Provide for sufficient ventilation, particularly in closed rooms.
Dust should be exhausted directly at the point of origin.
Environmental precautions:Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up: Take up mechanically, placing in appropriate containers for disposal.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 3 of 7
Additional information:Special danger of slipping by leaking/spilling product.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid contact with skin, eyes, and
clothing. Do not breathe vapor/aerosol. Do not breathe dust. Wear appropriate protective
equipment. When using do not eat, drink or smoke. Wash hands before breaks and after work.
Precautions against fire and explosion:
Keep away from heat sources, sparks and open flames. Take standard precautions to prevent
fire.
Storage
Requirements for storerooms and containers:
Keep only in the original container.
Keep container tightly closed in a cool, well-ventilated place.
Store in a dry place. Do not drop, drag or bang the container.
Hints on joint storage:Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
CAS No. DesignationType Limit value
14808-60-7Quartz (SiO2)USA: ACGIH: TWA 0.025 mg/m (respirable fraction)
USA: IDLH: TWA 25 mg/m (respirable fraction, (cristobalite/tridymite)
USA: IDLH: TWA 50 mg/m (respirable fraction, quartz/tripoli)
USA: NIOSH: TWA 0.05 mg/m (respirable fraction)
USA: OSHA: TWA 10 mg/m /% SiO2+ 2 (respirable fraction)
USA: OSHA: TWA 250 mppcf/%SiO2+5 (fine dust)
USA: OSHA: TWA 30 mg/m /% SiO2+ 2 (inhalable fraction)
Additional information:Contains Quartz (SiO2) dispersed in a non-hazardous form. If dust is recreated, appropriate
respiratory and/or explosion precautions must still be used.
Engineering controls
Provide adequate ventilation, and local exhaust as needed.
In case of dust/vapor/Aerosol: Withdraw by suction.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: Safety glasses in accordance with OSHA 29 CFR: 1910.133 or ANSI Z87.1-2010..
Skin protection: Recommended: Wear suitable protective clothing.
Recommended: Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: Plastic or Rubber.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Not necessary, if the room is well-ventilated.
Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product. If the concentration
is exceeded, self-contained breathing apparatus must be used.
General hygiene considerations:Avoid contact with skin, eyes, and clothing. Eye wash facility must be provided. Do not breathe
vapor/aerosol. Do not breathe dust. Change contaminated clothing. Wash contaminated
clothing prior to re-use. Wash hands before breaks and after work. When using do not eat,
drink or smoke.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 4 of 7
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid, pasty
Color: brownish
Odor: odorless
Odor threshold: No data available
pH: not applicable
Melting point/freezing point: No data available
Initial boiling point and boiling range: 500 F
Flash point/flash point range: 374 F (o.c.)
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: at 77 F: negligible
Vapor density: No data available
Density: at 77 F: 1.25 g/cm
Water solubility: insoluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
Hazardous polymerisation: Will not occur
Conditions to avoid: Keep away from heat.
Incompatible materials:Strong oxidizing agents, strong acids, strong bases
Hazardous decomposition products:
May form dangerous gases and vapors in case of fire.
In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon
compounds, formaldehyde, carbon monoxide and carbon dioxide.
Thermal decomposition: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 5 of 7
11. Toxicological information
Toxicological tests
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: IARC rating:
Contains silicon dioxide (CAS 14808-60-7): Group 1
Symptoms
In case of inhalation: Overheating released mist or vapors can irritate the respiratory tracts.
In case of ingestion: Gastrointestinal irritation
After contact with skin: Product can cause slight irritation.
After eye contact: Product can cause slight irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not readily biodegradable.
Additional ecological information
General information: Avoid release to the environment.
13. Disposal considerations
Product
Recommendation: Special waste. Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the
same way as the substance itself. Non-contaminated packages may be recycled. Do not
remove label until container is thoroughly cleaned.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 6 of 7
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Product: All ingredients of this product are listed on the TSCA inventory.
Quartz (SiO2): TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 1
OSHA Carcinogen: not listed
NTP Rating: listed
NIOSH Recommendations:
Occupational Health Guideline: 0553
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 A
Material number 1037
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OEL: Occupational Exposure Limit Value
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TLV: Threshold Limit Value
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
WEL: Workplace Exposure Limit
Reason of change: General revision
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Airpac 15 B
Relevant identified uses of the substance or mixture and uses advised against
General use: Two part RTV silicone
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid, pasty
Color: red
Odor: odorless
Classification: This material is classified as not hazardous.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Hazards not otherwise classified
Direct contact may cause skin and eyes reddening and irritation.
Overheating released mist or vapors can irritate the respiratory tracts.
In case of ingestion gastrointestinal irritation.
Special danger of slipping by leaking/spilling product.
see section 11: Toxicological information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 2 of 7
3. Composition / Information on ingredients
Chemical characterization:Organopolysiloxane mixture and Quartz (SiO2) (CAS 14808-60-7).
The maximum workplace exposure limits are, where necessary, listed in section 8.
4. First aid measures
In case of inhalation: Move victim to fresh air; if necessary, provide artificial respiration or oxygen. Immediately get
medical attention.
Following skin contact:Thoroughly wash skin with soap and water. Change contaminated clothing. In case of skin
irritation, consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart.
In case of troubles or persistent symptoms, consult an opthalmologist.
After swallowing: Seek medical attention. Do not induce vomiting without medical assistance. Never give
anything by mouth to an unconscious person. Rinse mouth.
Most important symptoms/effects, acute and delayed
In case of inhalation: Overheating released mist or vapors can irritate the respiratory tracts.
In case of ingestion: Gastrointestinal irritation
After contact with skin: Product can cause slight irritation.
After eye contact: Product can cause slight irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:> 302 F (c.c.)
Auto-ignition temperature:No data available
Suitable extinguishing media:Carbon dioxide, alcohol resistant foam,
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. May form dangerous gases and vapors
in case of fire.
In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon
compounds, formaldehyde, carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Heating causes rise in pressure with risk of bursting. Cool
endangered containers with water spray and, if possible, remove from danger zone. Fight fire
from a safe distance. Stay upwind/keep distance from source. Use water spray jet to knock
down vapors. Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions: Attention: With exposure to impurity, product will release hydrogen. Eliminate all ignition sources
if safe to do so. Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation
and contact with skin and eyes. Wear appropriate protective equipment.
In case of dust/vapor/Aerosol: Provide for sufficient ventilation, particularly in closed rooms.
Dust should be exhausted directly at the point of origin.
Environmental precautions:Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up: Take up mechanically, placing in appropriate containers for disposal.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 3 of 7
Additional information:Special danger of slipping by leaking/spilling product.
7. Handling and storage
Handling
Advices on safe handling:Use caution when opening containers under pressure. Provide adequate ventilation, and local
exhaust as needed. Avoid contact with skin, eyes, and clothing. Do not breathe vapor/aerosol.
Do not breathe dust. Wear appropriate protective equipment. When using do not eat, drink or
smoke. Wash hands before breaks and after work.
Precautions against fire and explosion:
Product may separate hydrogen. Keep away from heat sources, sparks and open flames. Take
standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep only in the original container.
Keep container tightly closed in a cool, well-ventilated place.
Store in a dry place. Do not drop, drag or bang the container.
Hints on joint storage:Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
CAS No. DesignationType Limit value
14808-60-7Quartz (SiO2)USA: ACGIH: TWA 0.025 mg/m (respirable fraction)
USA: IDLH: TWA 25 mg/m (respirable fraction, (cristobalite/tridymite)
USA: IDLH: TWA 50 mg/m (respirable fraction, quartz/tripoli)
USA: NIOSH: TWA 0.05 mg/m (respirable fraction)
USA: OSHA: TWA 10 mg/m /% SiO2+ 2 (respirable fraction)
USA: OSHA: TWA 250 mppcf/%SiO2+5 (fine dust)
USA: OSHA: TWA 30 mg/m /% SiO2+ 2 (inhalable fraction)
Additional information:Contains Quartz (SiO2) dispersed in a non-hazardous form. If dust is recreated, appropriate
respiratory and/or explosion precautions must still be used.
Engineering controls
Provide adequate ventilation, and local exhaust as needed.
In case of dust/vapor/Aerosol: Withdraw by suction.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: Safety glasses in accordance with OSHA 29 CFR: 1910.133 or ANSI Z87.1-2010..
Skin protection: Recommended: Wear suitable protective clothing.
Recommended: Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: Plastic or Rubber.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Not necessary, if the room is well-ventilated.
Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product. If the concentration
is exceeded, self-contained breathing apparatus must be used.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 4 of 7
General hygiene considerations:Avoid contact with skin, eyes, and clothing. Eye wash facility must be provided. Do not breathe
vapor/aerosol. Do not breathe dust. Change contaminated clothing. Wash contaminated
clothing prior to re-use. Wash hands before breaks and after work. When using do not eat,
drink or smoke.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid, pasty
Color: red
Odor: odorless
Odor threshold: No data available
pH: not applicable
Melting point/freezing point: No data available
Initial boiling point and boiling range: 500 F
Flash point/flash point range: > 302 F (c.c.)
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: at 77 F: negligible
Vapor density: No data available
Density: at 77 F: 1.25 g/cm
Water solubility: insoluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
Hazardous polymerisation: Will not occur
Product may release hydrogen gas.
Conditions to avoid: Keep away from heat.
Incompatible materials:Strong oxidizing agents, strong acids, strong bases
Hazardous decomposition products:
May form dangerous gases and vapors in case of fire.
In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon
compounds, formaldehyde, carbon monoxide and carbon dioxide.
Thermal decomposition: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 5 of 7
11. Toxicological information
Toxicological tests
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: IARC rating:
Contains silicon dioxide (CAS 14808-60-7): Group 1
Symptoms
In case of inhalation: Overheating released mist or vapors can irritate the respiratory tracts.
In case of ingestion: Gastrointestinal irritation
After contact with skin: Product can cause slight irritation.
After eye contact: Product can cause slight irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not readily biodegradable.
Additional ecological information
General information: Avoid release to the environment.
13. Disposal considerations
Product
Recommendation: Special waste. Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the
same way as the substance itself. Non-contaminated packages may be recycled. Do not
remove label until container is thoroughly cleaned.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 6 of 7
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Product: All ingredients of this product are listed on the TSCA inventory.
Quartz (SiO2): TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 1
OSHA Carcinogen: not listed
NTP Rating: listed
NIOSH Recommendations:
Occupational Health Guideline: 0553
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airpac 15 B
Material number 1038
Revision date: 5/12/2023
Version: 9.2
Replaces version: 9.1
Language: en-US
Date of first version:8/22/2012
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OEL: Occupational Exposure Limit Value
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TLV: Threshold Limit Value
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
WEL: Workplace Exposure Limit
Reason of change: General revision
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

17AC3700-9_SDS.pdf

by | Sep 27, 2025

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Aircast 3700A, Aircast 3600A
Material number 1032
Revision date: 5/15/2019
Version: 15
Language: en-US
Date of first version:8/13/2008
Page: 1 of 9
1. Product and company identification
Product identifier
Trade name: Aircast 3700A, Aircast 3600A
Relevant identified uses of the substance or mixture and uses advised against
General use: RTV high temperature casting compound.
Reserved for industrial and professional use.
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Physical state at 68 F and 101.3 kPa: solid
Form: pasty
Color: brown
Odor: weak
Classification: Reproductive toxicant – Category 2;
Hazard symbols:
Signal word: Warning
Hazard statements:
Suspected of damaging fertility or the unborn child.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Aircast 3700A, Aircast 3600A
Material number 1032
Revision date: 5/15/2019
Version: 15
Language: en-US
Date of first version:8/13/2008
Page: 2 of 9
Precautionary statements:
Obtain special instructions before use.
Use personal protective equipment as required.
IF exposed or concerned: Get medical advice/attention.
Store locked up.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
Special danger of slipping by leaking/spilling product.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
A mixture of organopolysiloxane mixture and silicon dioxide.
Relevant ingredients:
CAS No. Designation Content Classification
CAS
541-02-6
Decamethylcyclopentasiloxane< 0.5 % not applicable CAS 540-97-6 Dodecamethylcyclohexasiloxane< 0.5 % not applicable CAS 556-67-2 Octamethylcyclotetrasiloxane< 0.5 % Flammable Liquid - Category 3. Reproductive toxicant - Category 2. Aquatic toxicity - chronic - Category 4. Additional information:The maximum workplace exposure limits are, where necessary, listed in section 8. Contains: Silicon dioxide (Quartz (SiO2)) 4. First aid measures In case of inhalation:Provide fresh air. Seek medical treatment in case of troubles. Following skin contact:Remove mechanically with cloth or paper. Thoroughly wash skin with soap and water. Change contaminated clothing. In case of skin reactions, consult a physician. After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms, consult an opthalmologist. After swallowing: Seek medical attention. Rinse mouth. Do not induce vomiting without medical assistance. Most important symptoms/effects, acute and delayed Suspected of damaging fertility or the unborn child. Product can cause slight irritation. Information to physician Treat symptomatically. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 3 of 9 5. Fire fighting measures Flash point/flash point range: 482 F (o.c.) Auto-ignition temperature: No data available Suitable extinguishing media: Carbon dioxide, dry chemical powder, alcohol resistant foam. Extinguishing media which must not be used for safety reasons: full water jet Specific hazards arising from the chemical Combustible. Emits toxic fumes under fire conditions. In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon compounds, formaldehyde, carbon monoxide and carbon dioxide. Protective equipment and precautions for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing. Additional information:Cool endangered containers with water spray and, if possible, remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do not allow fire water to penetrate into surface or ground water. 6. Accidental release measures Personal precautions:Avoid contact with the substance. Wear suitable protective clothing. Provide adequate ventilation. Do not breathe vapor or spray. Keep unprotected people away. Environmental precautions: Do not allow to penetrate into soil, waterbodies or drains. If necessary notify appropriate authorities. Methods for clean-up:Plug leak if safely possible. Take up mechanically, placing in appropriate containers for disposal. Additional information:Special danger of slipping by leaking/spilling product. 7. Handling and storage Handling Advices on safe handling:Do not breathe vapor or spray. Obtain special instructions before use. Provide adequate ventilation, and local exhaust as needed. Avoid contact with skin and eyes. Wear suitable gloves. When using do not eat, drink or smoke. Precautions against fire and explosion: Keep away from heat sources, sparks and open flames. Take standard precautions to prevent fire. Storage Requirements for storerooms and containers: Keep only in the original container. Keep container tightly closed in a cool, well-ventilated place. Do not drop, drag or bang the container. Protect from frost and exposure to sun. Hints on joint storage:Keep away from food and drinks. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 4 of 9 8. Exposure controls / personal protection Exposure guidelines Occupational exposure limit values: CAS No. Designation Type Limit value 14808-60-7Silicon dioxide (Quartz (SiO2)) USA: ACGIH: TWA 0.025 mg/m (respirable fraction) USA: NIOSH: TWA 0.05 mg/m (respirable fraction) USA: OSHA: TWA 10 mg/m /% SiO2+ 2 (respirable fraction) USA: OSHA: TWA 250 mppcf/%SiO2+5 (fine dust) USA: OSHA: TWA 30 mg/m /% SiO2+ 2 (inhalable fraction) 7631-86-9Silicon dioxide USA: NIOSH: TWA 6 mg/m USA: OSHA: TWA 20 mppcf USA: OSHA: TWA 80 mg/m (total dust) Additional information:Silicon dioxide, Quartz (SiO2) are embedded in the product and therefore no dust is present. Engineering controls Provide adequate ventilation, and local exhaust as needed. See also information in chapter 7, section storage. Personal protection equipment (PPE) Eye/face protectionSafety glasses for nomal handling, and sealed goggles for handling material during heated processing or opening packages after material has been in closed storage. PPE to be in accordance with OSHA 29 CFR: 1910.133 or ANSI Z87.1-2010. Skin protection Wear suitable protective clothing. Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Plastic or Rubber. Observe glove manufacturer's instructions concerning penetrability and breakthrough time. Respiratory protection:Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded. When vapors form, use respiratory protection. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. General hygiene considerations: Do not breathe vapor or spray. Avoid contact with skin, eyes, and clothing. Change contaminated clothing. Eye wash facility must be provided. Wash hands before breaks and after work. When using do not eat, drink or smoke. 9. Physical and chemical properties Information on basic physical and chemical properties Appearance: Physical state at 68 F and 101.3 kPa: solid Form: pasty Color: brown Odor: weak Odor threshold: No data available pH value: not applicable printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 5 of 9 Melting point/freezing point: No data available Initial boiling point and boiling range:No data available Flash point/flash point range: 482 F (o.c.) Evaporation rate: No data available Flammability: No data available Explosion limits: No data available Vapor pressure: No data available Vapor density: No data available Density: at 77 F: 1.25 g/cm Solubility: miscible with organic solvents Water solubility: insoluble Partition coefficient: n-octanol/water:No data available Auto-ignition temperature: No data available Thermal decomposition: No data available Viscosity, dynamic: 180000 mPa*s 10. Stability and reactivity Reactivity: Refer to section: Possibility of hazardous reactions. Chemical stability:Stable under recommended storage conditions. Possibility of hazardous reactions No hazardous reactions known. Conditions to avoid:Keep away from heat. Incompatible materials:Strong bases, strong oxidizing agents, strong acids Hazardous decomposition products: Thermal breakdown of this product during fire or very high heat condition may evolve the following hazardous decomposition products: Silicon dioxide, traces of incompletely burned carbon compounds, formaldehyde, carbon monoxide and carbon dioxide. Thermal decomposition:No data available printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 6 of 9 11. Toxicological information Toxicological tests Toxicological effects:Acute toxicity (oral): Lack of data. Acute toxicity (dermal): Lack of data. Acute toxicity (inhalative): Lack of data. Skin corrosion/irritation: Lack of data. Serious eye damage/irritation: Lack of data. Sensitisation to the respiratory tract: Lack of data. Skin sensitisation: Lack of data. Germ cell mutagenicity/Genotoxicity: Lack of data. Carcinogenicity: Lack of data. Reproductive toxicity: Reproductive toxicant - Category 2 = Suspected of damaging fertility or the unborn child. Effects on or via lactation: Lack of data. Specific target organ toxicity (single exposure): Lack of data. Specific target organ toxicity (repeated exposure): Lack of data. Aspiration hazard: Lack of data. Other information: Information about Silicon dioxide (Quartz (SiO2)): Carcinogen Status: IARC Rating: Group 1 OSHA Carcinogen: not listed NTP Rating: listed NIOSH Recommendations: Occupational Health Guideline: 0553 Silicon dioxide: Carcinogen Status: IARC Rating: Group 3 OSHA Carcinogen: not listed NTP Rating: not listed NIOSH Recommendations: Occupational Health Guideline: 0552 Symptoms In case of inhalation: Overheating released mist or vapors can irritate the respiratory tracts. Can damage your health. In case of ingestion: Gastrointestinal irritation. After contact with skin: Frequently or prolonged contact with skin may cause dermal irritation. After eye contact: Product can cause slight irritation. 12. Ecological information Ecotoxicity Further details: No data available printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 7 of 9 Mobility in soil No data available Persistence and degradability Further details: No data available Additional ecological information General information:Do not allow to penetrate into soil, waterbodies or drains. 13. Disposal considerations Product Recommendation: Special waste. Dispose of waste according to applicable legislation. Contaminated packaging Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the same way as the substance itself. Non-contaminated packages may be recycled. Do not remove label until container is thoroughly cleaned. 14. Transport information USA: Department of Transportation (DOT) Proper shipping name: Not restricted Sea transport (IMDG) Proper shipping name: Not restricted Marine pollutant: no Air transport (IATA) Proper shipping name: Not restricted Further information No dangerous good in sense of these transport regulations. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 8 of 9 15. Regulatory information National regulations - U.S. Federal Regulations Silicon dioxide (Quartz (SiO2)):TSCA Inventory: listed TSCA HPVC: not listed Carcinogen Status: IARC Rating: Group 1 OSHA Carcinogen: not listed NTP Rating: listed NIOSH Recommendations: Occupational Health Guideline: 0553 Silicon dioxide: TSCA Inventory: listed TSCA HPVC: not listed Carcinogen Status: IARC Rating: Group 3 OSHA Carcinogen: not listed NTP Rating: not listed NIOSH Recommendations: Occupational Health Guideline: 0552 Decamethylcyclopentasiloxane:TSCA Inventory: listed TSCA HPVC: not listed Dodecamethylcyclohexasiloxane:TSCA Inventory: listed TSCA HPVC: not listed Octamethylcyclotetrasiloxane:TSCA Inventory: listed TSCA HPVC: not listed National regulations - U.S. State Regulations Silicon dioxide (Quartz (SiO2)):California Proposition 65: cancer National regulations - Great Britain Hazchem-Code: - 16. Other information Text for labeling: Contains < 0.5 % Decamethylcyclopentasiloxane, < 0.5 % Dodecamethylcyclohexasiloxane, < 0.5 % Octamethylcyclotetrasiloxane. Safety data sheet available on request. Hazard rating systems: 1 20 NFPA Hazard Rating: Health: 2 (Moderate) Fire: 1 (Slight) Reactivity: 0 (Minimal) HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 X HMIS Version III Rating: Health: 2 (Moderate) - Chronic effects Flammability: 1 (Slight) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor Reason of change: Changes in section 1: Identification of the substance or mixture Department issuing data sheet Contact person: see section 1: Dept. responsible for information printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700A, Aircast 3600A Material number 1032 Revision date: 5/15/2019 Version: 15 Language: en-US Date of first version:8/13/2008 Page: 9 of 9 This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees. As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 1 of 7 1. Product and company identification Product identifier Trade name: Aircast 3700B, Aircast 3600B Relevant identified uses of the substance or mixture and uses advised against General use: Curing agent for RTV casting resin. Reserved for industrial and professional use. Details of the supplier of the safety data sheet Company name: Airtech International, Inc. 5700 Skylab Road Huntington Beach, CA 92647 E-mail: airtech@airtechintl.com Website: www.airtechonline.com Telephone: +1 714.899.8100 Dept. responsible for information: Telephone: +1 714.899.8100 E-mail: airtech@airtechintl.com Airtech Europe Sarl Zone industrielle Haneboesch L 4562 Differdange Luxembourg Website: www.airtech.lu Telephone: +352 582.282 Dept. responsible for information: Telephone: +352 582.282 E-mail: sales@airtech.lu Tygavac Advanced Materials Ltd. The Causeway Broadway Business Park Chadderton, Oldham OL9 9XD United Kingdom Website: www.tygavac.co.uk Telephone: +44 161.947.1610 Dept. responsible for information: Telephone: +44 161.947.1610 E-mail: sales@tygavac.co.uk Airtech Asia Ltd. No. 161 of Anyuan Rd Chagugang County Wuqing District 301721, Tianjin, P.R. China Website: www.airtech.asia Telephone: +86 22 8862 9800 Telefax:: +86 22 8862 9900 Dept. responsible for information: Telephone: +86 22 8862 9800 E-mail: airtech.asia@airtechasia.com.cn Emergency phone number CHEMTREC EMERGENCY PHONE: Within USA/Canada: 1-(800)424-9300 International: +1 703-741-5970 2. Hazards identification Emergency overview Appearance: Form: liquid Color: blue Odor: odorless Classification: Reproductive toxicant - Category 2; Hazard symbols: Signal word: Warning Hazard statements: Suspected of damaging fertility or the unborn child. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 2 of 7 Precautionary statements: Obtain special instructions before use. Use personal protective equipment as required. IF exposed or concerned: Get medical advice/attention. Store locked up. Dispose of contents/container to hazardous or special waste collection point. Regulatory status This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200) and SIMDUT in Canada. Hazards not otherwise classified Product may separate hydrogen. Danger of explosion! Direct contact may cause skin and eyes reddening and irritation. Overheating released mist or vapors can irritate the respiratory tracts. In case of ingestion gastrointestinal irritation. see section 11: Toxicological information 3. Composition / Information on ingredients Chemical characterization: A mixture of Vinyldimethyl terminated Polydimethylsiloxane (CAS 68083-19-2) and Polymethylhydrosiloxane (CAS 63148-57-2). Relevant ingredients: CAS No. Designation Content Classification CAS 556-67-2 Octamethylcyclotetrasiloxane< 1 % Flammable Liquid - Category 3. Reproductive toxicant - Category 2. Aquatic toxicity - chronic - Category 4. 4. First aid measures In case of inhalation:Provide fresh air. Seek medical treatment in case of troubles. Following skin contact:Remove mechanically with cloth or paper. Change contaminated clothing. Thoroughly wash skin with soap and water. In case of skin reactions, consult a physician. After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms, consult an opthalmologist. After swallowing: Seek medical attention. Rinse mouth immediately and drink plenty of water. Do not induce vomiting without medical assistance. Most important symptoms/effects, acute and delayed Suspected of damaging fertility or the unborn child. Product can cause slight irritation. Information to physician Treat symptomatically. 5. Fire fighting measures Flash point/flash point range: 201.2 F (o.c.) Auto-ignition temperature: No data available printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 3 of 7 Suitable extinguishing media: Carbon dioxide, dry chemical powder, foam. Extinguishing media which must not be used for safety reasons: Full water jet. Specific hazards arising from the chemical Emits toxic fumes under fire conditions. In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon compounds, formaldehyde, carbon monoxide and carbon dioxide. Protective equipment and precautions for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing. Additional information:Cool endangered containers with water spray and, if possible, remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do not allow fire water to penetrate into surface or ground water. 6. Accidental release measures Personal precautions:Product may separate hydrogen. Remove all sources of ignition. Provide adequate ventilation. Wear suitable protective clothing. Avoid contact with the substance. Environmental precautions: Do not allow to penetrate into soil, waterbodies or drains. Methods for clean-up:Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder. Store in special closed containers and dispose of according to ordinance. 7. Handling and storage Handling Advices on safe handling:Obtain special instructions before use. Provide adequate ventilation, and local exhaust as needed. Avoid contact with skin and eyes. Do not breathe vapor or spray. Wear suitable gloves. Precautions against fire and explosion: Keep away from heat sources, sparks and open flames. Storage Requirements for storerooms and containers: Keep in a cool place. Keep container tightly closed and in a well-ventilated place. Protect from frost and exposure to sun. Hints on joint storage:Keep away from strongly acidic and alkaline materials as well as oxidizers. Keep away from food and drinks. 8. Exposure controls / personal protection Engineering controls Provide good ventilation and/or an exhaust system in the work area. See also information in chapter 7, section storage. Personal protection equipment (PPE) Eye/face protectionTightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010. Skin protection Wear suitable protective clothing. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 4 of 7 Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Plastic or rubber Observe glove manufacturer's instructions concerning penetrability and breakthrough time. Respiratory protection:When vapors form, use respiratory protection. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. Recommended: Use filter type A (= against vapors of organic substances) according to OSHA Standard - 29 CFR: 1910.134 or ANSI Z88.2. General hygiene considerations: Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Eye wash facility must be provided. Wash hands before breaks and after work. When using do not eat, drink or smoke. 9. Physical and chemical properties Information on basic physical and chemical properties Appearance: Form: liquid Color: blue Odor: odorless Odor threshold: No data available pH value: No data available Melting point/freezing point: No data available Initial boiling point and boiling range:No data available Flash point/flash point range: 201.2 F (o.c.) Evaporation rate: No data available Flammability: This material is combustible, but will not ignite readily. Explosion limits: No data available Vapor pressure: No data available Vapor density: No data available Density: No data available Solubility: No data available Partition coefficient: n-octanol/water:No data available Auto-ignition temperature: No data available Thermal decomposition: No data available Additional information: No data available 10. Stability and reactivity Reactivity: Refer to section: Possibility of hazardous reactions. Chemical stability:Stable under recommended storage conditions. Possibility of hazardous reactions Hazardous polymerisation: May occur. Polymerization along with heat production. Product may separate hydrogen. Danger of explosion! Conditions to avoid:Keep away from heat sources, sparks and open flames. Incompatible materials:Strong acid or bases as well as oxidizing agents. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 5 of 7 Hazardous decomposition products: Product may release hydrogen gas. In case of fire may be liberated: Silicon dioxide, traces of incompletely burned carbon compounds, formaldehyde, carbon monoxide and carbon dioxide. Thermal decomposition:No data available 11. Toxicological information Toxicological tests Toxicological effects:Acute toxicity (oral): Lack of data. Acute toxicity (dermal): Lack of data. Acute toxicity (inhalative): Lack of data. Skin corrosion/irritation: Lack of data. Serious eye damage/irritation: Lack of data. Sensitisation to the respiratory tract: Lack of data. Skin sensitisation: Lack of data. Germ cell mutagenicity/Genotoxicity: Lack of data. Carcinogenicity: Lack of data. Reproductive toxicity: Reproductive toxicant - Category 2 = Suspected of damaging fertility or the unborn child. Effects on or via lactation: Lack of data. Specific target organ toxicity (single exposure): Lack of data. Specific target organ toxicity (repeated exposure): Lack of data. Aspiration hazard: Lack of data. Symptoms In case of inhalation: Overheating released mist or vapors can irritate the respiratory tracts. In case of ingestion: Gastrointestinal irritation. After contact with skin: Frequently or prolonged contact with skin may cause dermal irritation. After eye contact: Product can cause slight irritation. 12. Ecological information Ecotoxicity Further details: No data available Mobility in soil No data available Persistence and degradability Further details: No data available Additional ecological information General information:Do not allow to penetrate into soil, waterbodies or drains. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 6 of 7 13. Disposal considerations Product Recommendation: Special waste. Dispose of waste according to applicable legislation. Contaminated packaging Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the same way as the substance itself. Non-contaminated packages may be recycled. Do not remove label until container is thoroughly cleaned. 14. Transport information USA: Department of Transportation (DOT) Proper shipping name: Not restricted Sea transport (IMDG) Proper shipping name: Not restricted Marine pollutant: no Air transport (IATA) Proper shipping name: Not restricted Further information No dangerous good in sense of these transport regulations. 15. Regulatory information National regulations - U.S. Federal Regulations Vinyldimethyl terminated Polydimethylsiloxane:TSCA Inventory: listed; UVCB; EPA flags XU TSCA HPVC: not listed Polymethylhydrosiloxane: TSCA Inventory: listed; UVCB; EPA flags XU TSCA HPVC: not listed Octamethylcyclotetrasiloxane: TSCA Inventory: listed TSCA HPVC: not listed National regulations - Great Britain Hazchem-Code: - 16. Other information Text for labeling: Contains < 1 % Octamethylcyclotetrasiloxane. Safety data sheet available on request. Hazard rating systems: 1 20 NFPA Hazard Rating: Health: 2 (Moderate) Fire: 1 (Slight) Reactivity: 0 (Minimal) HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 X HMIS Version III Rating: Health: 2 (Moderate) - Chronic effects Flammability: 1 (Slight) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor Reason of change: Changes in section 1: Identification of the substance or mixture printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 Aircast 3700B, Aircast 3600B Material number 1033 Revision date: 5/15/2019 Version: 9 Language: en-US Date of first version:8/12/2008 Page: 7 of 7 Department issuing data sheet Contact person: see section 1: Dept. responsible for information This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees. As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof. printed by Airtech Advanced Materials Group with Qualisys SUMDAT

172125-D_SDS.pdf

by | Sep 27, 2025

Safety Data Sheet C [Fa T
SMART CHEMISTRY
WITH CHARACTER.
Issuing Date 17-Jun-2015 Revision date 21-May-2021 Version 2
1. Identification
Product identifier
Product name QM 2125
Other means of identification
Synonyms None
Recommended use of the chemical and restrictions on use
Recommended use Industrial silicone elastomer
Restrictions on use For industrial use only
Details of the supplier of the safety data sheet
Supplier Manufacturer Address
CHT USA Inc. CHT USA Inc.
805 Wolfe Avenue 7820 Whitepine Rd
Cassopolis, MI 49031 Richmond, VA 23237
Emergency telephone number
Company Phone Number 800-852-3147 (8AM – SPM EST)
Emergency telephone Chemtrec 1-800-424-9300
ECTION 2: Hazards identification
Classification
Hazards not otherwise classified (HNOC)
Not applicable
Label elements
farning
Hazard statements
uspected of damaging fertility or the unborn child
PAGE 1/8

15TMGP4100A_SDS.pdf

by | Sep 27, 2025

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 1 of 9
1. Product and company identification
Product identifier
Trade name: TMFP 3100, 3200
Relevant identified uses of the substance or mixture and uses advised against
General use: Fiberglass / epoxy prepreg
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Physical state at 68 F and 101.3 kPa: solid
Form: Carbon fabric impregnated with viscous blue paste
Color: blue
Odor: characteristic
Classification: Skin Irritation – Category 2; Eye Irritation – Category 2A; Sensitization – skin –
Category 1; Germ cell mutagenicity – Category 2; Carcinogenicity – Category 2;
Aquatic toxicity – chronic – Category 2;
Hazard symbols:
Signal word: Warning
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 2 of 9
Hazard statements:
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Suspected of causing genetic defects.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Precautionary statements:
Obtain special instructions before use.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Wash hands and face thoroughly after handling.
Contaminated work clothing should not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation occurs: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
Collect spillage.
Store locked up.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Fibreglass fabric impregnated with an epoxy resin system
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 3 of 9
Relevant ingredients:
CAS No. Designation Content Classification
CAS
28064-14-4
Bisphenol-F-
epichlorhydrine resin
25 – 50 % Skin Irritation – Category 2.
Eye Irritation – Category 2A.
Sensitization – skin – Category 1.
Aquatic toxicity – chronic – Category 2.
CAS 5026-74-4p-(2,3-Epoxypropoxy)-
N,N-bis(2,3-epoxypropyl)
aniline
10 – 20 % Acute Toxicity – oral – Category 4.
Skin Irritation – Category 2.
Sensitization – skin – Category 1.
Germ cell mutagenicity – Category 2.
Aquatic toxicity – chronic – Category 2.
CAS 80-08-0 4,4’-Diamino diphenyl
sulfone
10 – 20 % Acute Toxicity – oral – Category 4.
CAS
25068-38-6
Reaction product:
Bisphenol-A-
(epichlorhydrin) epoxy
resin (number average
molecular weight <=700) < 2 % Skin Irritation - Category 2. Eye Irritation - Category 2A. Sensitization - skin - Category 1. Aquatic toxicity - chronic - Category 2. CAS 150-68-5Monuron (ISO) < 2 % Acute Toxicity - oral - Category 4. Carcinogenicity - Category 2. Aquatic toxicity - acute - Category 1. Aquatic toxicity - chronic - Category 1. Additional information:Contains Silicon dioxide. The maximum workplace exposure limits are, where necessary, listed in section 8. 4. First aid measures In case of inhalation:Remove the casualty into fresh air and keep him calm. In case of breathing difficulties administer oxygen. No mouth-to-mouth or mouth-to-nose resuscitation. Use Ambu bag or ventilator. Immediately get medical attention. Following skin contact:Take off contaminated clothing and wash it before reuse. Wash immediately with plenty of water. Seek medical attention if irritation persists. After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an ophthalmologist. After swallowing: Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Do not induce vomiting. Immediately get medical attention. Most important symptoms/effects, acute and delayed Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. Information to physician Treat symptomatically. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMFP 3100, 3200 Material number 1057 Revision date: 9/4/2018 Version: 12 Language: en-US Date of first version:11/23/2009 Page: 4 of 9 5. Fire fighting measures Flash point/flash point range: Not applicable Auto-ignition temperature: No data available Suitable extinguishing media: Water spray jet, foam, dry chemical powder. Extinguishing media which must not be used for safety reasons: Full water jet Specific hazards arising from the chemical In case of fire may be liberated: nitrogen oxides (NOx), aldehydes, acids, carbon monoxide and carbon dioxide. Protective equipment and precautions for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing. Additional information:Cool exposed containers with water spray. Use a water fog to control vapors. Do not allow fire water to penetrate into surface or ground water. 6. Accidental release measures Personal precautions:Avoid exposure. Provide adequate ventilation. Wear appropriate protective equipment. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not breathe gas/fume/vapour/spray. Keep unprotected people away. Environmental precautions: Do not allow to enter into ground-water, surface water or drains. Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Final cleaning. 7. Handling and storage Handling Advices on safe handling:Obtain special instructions before use. Provide adequate ventilation. Wear appropriate protective equipment. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not breathe gas/fume/vapour/spray. When using do not eat, drink or smoke. Wash hands before breaks and after work. Eye wash facility must be provided. Storage Requirements for storerooms and containers: Keep container tightly closed in a cool, well-ventilated place. Refrigerated storage is recommended to maintain product quality. This product may be stored at 41 F for up to 12 months. Hints on joint storage:Incompatible materials: Strong oxidizing agents, strong Lewis acids or mineral acids. Keep away from food, drink and animal feedingstuffs. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMFP 3100, 3200 Material number 1057 Revision date: 9/4/2018 Version: 12 Language: en-US Date of first version:11/23/2009 Page: 5 of 9 8. Exposure controls / personal protection Exposure guidelines Occupational exposure limit values: CAS No. Designation Type Limit value 7631-86-9 Silicon dioxideUSA: NIOSH: TWA 6 mg/m USA: OSHA: TWA 20 mppcf USA: OSHA: TWA 80 mg/m (total dust) Engineering controls Provide good ventilation and/or an exhaust system in the work area. See also information in chapter 7, section storage. Personal protection equipment (PPE) Eye/face protectionTightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010. Skin protection Wear suitable protective clothing. Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Neoprene or rubber. Observe glove manufacturer's instructions concerning penetrability and breakthrough time. Respiratory protection:Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. General hygiene considerations: Avoid exposure - obtain special instructions before use. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not breathe gas/fume/vapour/spray. Have eye wash bottle or eye rinse ready at work place. Wash hands before breaks and after work. When using do not eat or drink. 9. Physical and chemical properties Information on basic physical and chemical properties Appearance: Physical state at 68 F and 101.3 kPa: solid Form: Carbon fabric impregnated with viscous blue paste Color: blue Odor: characteristic Odor threshold: No data available pH value: not applicable Melting point/freezing point: No data available Initial boiling point and boiling range:No data available Flash point/flash point range: Not applicable Evaporation rate: No data available Flammability: No data available Explosion limits: No data available Vapor pressure: No data available Vapor density: >= 1
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 6 of 9
Density: No data available
Water solubility: negligible
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: No data available
Chemical stability:Stable under recommended storage conditions.
This product may be stored at 41 F for up to 12 months.
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat.
Incompatible materials:Strong oxidizing agents, strong Lewis acids or mineral acids
Hazardous decomposition products:
Exothermal decomposition with formation of: toxic gases, Nitrogen oxides (NOx),
aldehydes, acids, carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Based on available data, the classification criteria are not met.
ATEmix calculated: > 2000 mg/kg
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Skin Irritation – Category 2 = Causes skin irritation.
Serious eye damage/irritation: Eye Irritation –
Category 2A = Causes serious eye irritation.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Germ cell mutagenicity –
Category 2 = Suspected of causing genetic defects.
Carcinogenicity: Carcinogenicity – Category 2 = Suspected of causing cancer.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 7 of 9
Other information: Chronic toxicity – Carcinogenic effect:
4,4′-Diamino diphenylsulfone:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Monuron (ISO):
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Silicon dioxide:
Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
12. Ecological information
Ecotoxicity
Aquatic toxicity: Toxic to aquatic life with long lasting effects.
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not allow to enter into ground-water, surface water or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation.
Handle contaminated packages in the same way as the substance itself.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: not applicable
Air transport (IATA)
Proper shipping name: Not restricted
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 8 of 9
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Bisphenol-F-epichlorhydrine resin: TSCA Inventory: listed; UVCB; EPA flags
XU
TSCA HPVC: not listed
p-(2,3-Epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
4,4′-Diamino diphenyl sulfone: TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Reaction product: Bisphenol-A-(epichlorhydrin) epoxy resin
(number average molecular weight <=700): TSCA Inventory: listed; EPA flags XU TSCA HPVC: not listed Monuron (ISO): TSCA Inventory: listed TSCA HPVC: not listed Carcinogen Status: IARC Rating: Group 3 OSHA Carcinogen: not listed NTP Rating: not listed Other Environmental Laws: SARA Title III Section 313, Toxic Release: Conc. 1.0% / Threshold Standard Silicon dioxide: TSCA Inventory: listed TSCA HPVC: not listed Carcinogen Status: IARC Rating: Group 3 OSHA Carcinogen: not listed NTP Rating: not listed NIOSH Recommendations: Occupational Health Guideline: 0552 National regulations - Great Britain Hazchem-Code: - 16. Other information Text for labeling: Contains 25 - 50 % Bisphenol-F-epichlorhydrine resin, 10 - 20 % p-(2,3-Epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline, 10 - 20 % 4,4'-Diamino diphenyl sulfone, < 2 % Reaction product: Bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <=700), < 2 % Monuron (ISO). Safety data sheet available on request. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMFP 3100, 3200 Material number 1057 Revision date: 9/4/2018 Version: 12 Language: en-US Date of first version:11/23/2009 Page: 9 of 9 Hazard rating systems: 1 20 NFPA Hazard Rating: Health: 2 (Moderate) Fire: 1 (Slight) Reactivity: 0 (Minimal) HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 X HMIS Version III Rating: Health: 2 (Moderate) - Chronic effects Flammability: 1 (Slight) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor Reason of change: Changes in section 1: Company/undertaking identification Department issuing data sheet Contact person: see section 1: Dept. responsible for information This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees. As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 1 of 8 1. Product and company identification Product identifier Trade name: TMGP-4000, 4100, 4200 Relevant identified uses of the substance or mixture and uses advised against General use: Carbon epoxy prepreg For industrial purposes only Details of the supplier of the safety data sheet Company name: Airtech International, Inc. 5700 Skylab Road Huntington Beach, CA 92647 E-mail: airtech@airtechintl.com Website: www.airtechonline.com Telephone: +1 714.899.8100 Dept. responsible for information: Telephone: +1 714.899.8100 E-mail: airtech@airtechintl.com Airtech Europe Sarl Zone industrielle Haneboesch L 4562 Differdange Luxembourg Website: www.airtech.lu Telephone: +352 582.282 Dept. responsible for information: Telephone: +352 582.282 E-mail: sales@airtech.lu Tygavac Advanced Materials Ltd. The Causeway Broadway Business Park Chadderton, Oldham OL9 9XD United Kingdom Website: www.tygavac.co.uk Telephone: +44 161.947.1610 Dept. responsible for information: Telephone: +44 161.947.1610 E-mail: sales@tygavac.co.uk Airtech Asia Ltd. No. 161 of Anyuan Rd Chagugang County Wuqing District 301721, Tianjin, P.R. China Website: www.airtech.asia Telephone: +86 22 8862 9800 Telefax:: +86 22 8862 9900 Dept. responsible for information: Telephone: +86 22 8862 9800 E-mail: airtech.asia@airtechasia.com.cn Emergency phone number CHEMTREC EMERGENCY PHONE: Within USA/Canada: 1-(800)424-9300 International: +1 703-741-5970 2. Hazards identification Emergency overview Appearance: Form: Carbon fabric impregnated with viscous blue paste Color: blue Odor: characteristic Classification: Skin Irritation - Category 2; Eye Irritation - Category 2A; Sensitization - skin - Category 1; Germ cell mutagenicity - Category 2; Carcinogenicity - Category 2; Aquatic toxicity - chronic - Category 2; Hazard symbols: Signal word: Warning printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 2 of 8 Hazard statements: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Suspected of causing genetic defects. Suspected of causing cancer. Toxic to aquatic life with long lasting effects. Precautionary statements: Obtain special instructions before use. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash hands and face thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water/soap. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Specific treatment (see ' First aid ' on this label). If skin irritation occurs: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Collect spillage. Store locked up. Dispose of contents/container to hazardous or special waste collection point. Regulatory status This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200) and SIMDUT in Canada. Hazards not otherwise classified see section 11: Toxicological information 3. Composition / Information on ingredients Chemical characterization: Carbon fabric impregnated with an epoxy resin system printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 3 of 8 Relevant ingredients: CAS No. Designation Content Classification CAS 28064-14-4 Bisphenol-F- epichlorhydrine resin < 50 % Skin Irritation - Category 2. Eye Irritation - Category 2A. Sensitization - skin - Category 1. Aquatic toxicity - chronic - Category 2. CAS 5026-74-4p-(2,3-Epoxypropoxy)-N,N- bis(2,3-epoxypropyl)aniline < 25 % Acute Toxicity - oral - Category 4. Skin Irritation - Category 2. Sensitization - skin - Category 1. Germ cell mutagenicity - Category 2. Aquatic toxicity - chronic - Category 2. CAS 80-08-0 4,4'-Diamino diphenyl sulfone < 25 % Acute Toxicity - oral - Category 4. CAS 25068-38-6 Reaction product: Bisphenol-A- (epichlorhydrin) epoxy resin (number average molecular weight <=700) < 2 % Skin Irritation - Category 2. Eye Irritation - Category 2A. Sensitization - skin - Category 1. Aquatic toxicity - chronic - Category 2. CAS 150-68-5Monuron (ISO) < 2 % Acute Toxicity - oral - Category 4. Carcinogenicity - Category 2. Aquatic toxicity - acute - Category 1. Aquatic toxicity - chronic - Category 1. 4. First aid measures In case of inhalation:Remove the casualty into fresh air and keep him calm. In case of breathing difficulties administer oxygen. Immediately get medical attention. Following skin contact:Take off contaminated clothing and wash it before reuse. After contact with skin, wash immediately with soap and plenty of water. Seek medical attention if irritation persists. After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist. After swallowing: Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Do not induce vomiting. Immediately get medical attention. Most important symptoms/effects, acute and delayed Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. Information to physician Treat symptomatically. 5. Fire fighting measures Flash point/flash point range: Decomposes before flashing. Auto-ignition temperature: No data available Suitable extinguishing media: Water spray jet, foam, dry chemical powder, carbon dioxide. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 4 of 8 Extinguishing media which must not be used for safety reasons: Full water jet Specific hazards arising from the chemical In case of fire may be liberated: nitrogen oxides (NOx), sulphur oxides, aldehydes, acids, carbon monoxide and carbon dioxide. Protective equipment and precautions for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing. Additional information:Cool exposed containers with water spray. Use a water fog to control vapors. Do not allow fire water to penetrate into surface or ground water. 6. Accidental release measures Personal precautions:Avoid exposure. Provide adequate ventilation. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not inhale substance. Wear appropriate protective equipment. Keep unprotected people away. Environmental precautions: Do not allow to enter into ground-water, surface water or drains. Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Final cleaning. Do not touch or step on spilled substance. 7. Handling and storage Handling Advices on safe handling:Obtain special instructions before use. Provide adequate ventilation. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not inhale substance. Wear appropriate protective equipment. When using do not eat, drink or smoke. Wash hands before breaks and after work. Eye wash facility must be provided. Storage Requirements for storerooms and containers: Refrigerated storage is recommended to maintain product quality. This product may be stored at -0.4 F for up to 12 months. Store locked up. Hints on joint storage:Incompatible materials: Strong oxidizing agents, strong Lewis acids or mineral acids. Keep away from food, drink and animal feedingstuffs. 8. Exposure controls / personal protection Engineering controls Provide good ventilation and/or an exhaust system in the work area. See also information in chapter 7, section storage. Personal protection equipment (PPE) Eye/face protectionTightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010. Skin protection Wear suitable protective clothing. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 5 of 8 Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Neoprene or rubber Breakthrough time: >480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Provide adequate ventilation.
Processing, e.g. by cutting, sawing or grinding, can produce particles and dust.
Wear a dust mask, in case of excessive dust.
Recommendation: Particulates filter N100 according to OSHA Standard – 29 CFR:
1910.134 or ANSI Z88.2.
General hygiene considerations:
Avoid exposure – obtain special instructions before use. Have eye wash bottle or eye
rinse ready at work place.
Wash hands before breaks and after work. When using do not eat or drink.
Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it
before reuse.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: Carbon fabric impregnated with viscous blue paste
Color: blue
Odor: characteristic
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: Decomposes before flashing.
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: practically insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: No data available
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat.
Incompatible materials:Strong oxidizing agents, strong Lewis acids or mineral acids
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
TMGP-4000, 4100, 4200
Material number 1058
Revision date: 9/4/2018
Version: 13
Language: en-US
Date of first version:5/24/2008
Page: 6 of 8
Hazardous decomposition products:
Exothermal decomposition with formation of: toxic gases, nitrogen oxides (NOx), sulphur
oxides, aldehydes, acids, carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Based on available data, the classification criteria are not met.
ATEmix calculated: > 2000 mg/kg
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Skin Irritation – Category 2 = Causes skin irritation.
Serious eye damage/irritation: Eye Irritation –
Category 2A = Causes serious eye irritation.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Germ cell mutagenicity –
Category 2 = Suspected of causing genetic defects.
Carcinogenicity: Carcinogenicity – Category 2 = Suspected of causing cancer.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Chronic toxicity – Carcinogenic effect:
4,4′-Diamino diphenylsulfone:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Monuron (ISO):
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
12. Ecological information
Ecotoxicity
Aquatic toxicity: Harmful to aquatic life with long lasting effects.
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
TMGP-4000, 4100, 4200
Material number 1058
Revision date: 9/4/2018
Version: 13
Language: en-US
Date of first version:5/24/2008
Page: 7 of 8
Additional ecological information
General information:Do not allow to enter into ground-water, surface water or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: not applicable
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Product: TSCA: All components listed
4,4′-Diamino diphenyl sulfone:Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Monuron (ISO): Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Other Environmental Laws:
SARA Title III Section 313, Toxic Release: Conc. 1.0% / Threshold Standard
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
TMGP-4000, 4100, 4200
Material number 1058
Revision date: 9/4/2018
Version: 13
Language: en-US
Date of first version:5/24/2008
Page: 8 of 8
16. Other information
Text for labeling: Contains < 50 % Bisphenol-F-epichlorhydrine resin, < 25 % p-(2,3-Epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline, < 25 % 4,4'-Diamino diphenyl sulfone, < 2 % Reaction product: Bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <=700), < 2 % Monuron (ISO). Safety data sheet available on request. Hazard rating systems: 1 20 NFPA Hazard Rating: Health: 2 (Moderate) Fire: 1 (Slight) Reactivity: 0 (Minimal) HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 X HMIS Version III Rating: Health: 2 (Moderate) - Chronic effects Flammability: 1 (Slight) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor Reason of change: Changes in section 1: Company/undertaking identification Department issuing data sheet Contact person: see section 1: Dept. responsible for information This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees. As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof. printed by Airtech Advanced Materials Group with Qualisys SUMDAT

15TEF738_SDS.pdf

by | Sep 27, 2025

Revision date: 5/1/2015 Revision: 0
SAFETY DATA SHEET
HexForce F69 Finish
1. Identification
Product identifier
Product name HexForce F69 Finish
Product number 20872US-2
Synonyms; trade names Applicable to: E Glass or S Glass or Woven Aluminum Coated Fiberglass Fabric using E
Glass Fibers with a Silane Finish applied.
Recommended use of the chemical and restrictions on use
Application Formulated product for Aerospace, Industrial and Wind Energy applications
Details of the supplier of the safety data sheet
Supplier Hexcel Reinforcements
1913 N. King Street
Seguin
TX 78155
USA
Tel: ++ 830 379 1580
Fax: ++830 379 9544
Contact Person 11711 Dublin Blvd, Dublin, California, USA. ++925 551 4900
Emergency telephone number
Emergency telephone To be used only for advice on chemical emergencies, spillages, fires or First Aid:
For emergencies in US/Canada: CHEMTREC 800 424 9300
For emergencies in rest of the world: CARECHEM24 +44 (0) 1235 239 670
2. Hazard(s) identification
Classification of the substance or mixture
OSHA Regulatory Status This Product is Not Hazardous under the OSHA Hazard Communication Standard.
Physical hazards Combustible Dust – USH01
Health hazards Not Classified
Environmental hazards Not Classified
Label elements
Signal word Warning
Hazard statements USH01 May form combustible dust concentrations in air.
Other hazards
Warning! May cause temporary mechanical irritation of the eyes, skin or upper respiratory tract. The American Conference of
Governmental Industrial Hygienists (ACGIH) lists under synthetic vitreous fiber; continous filament glass fibers: 1 f/cc
(respirable) and 5 mg/m3 (inhalable). Warning! Dust generated from machining, grinding or sanding the product may be
combustible and could result in fire and/or explosion should the necessary dust concentration in air and ignition source be
present.
1/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Hazards not otherwise
classified (HNOC)
Fine dust clouds may form explosive mixtures with air.
3. Composition/information on ingredients
Mixtures
Fiberglass fiber, synthetic, vitreous, continuous filament 60-100%
CAS number: 65997-17-3
Classification
Not Classified
Aluminum (for the coating on the fiberglass fiber based on
the total fabric weight)
10-30%
CAS number: 7429-90-5
Classification
Not Classified
The full text for all hazard statements is displayed in Section 16.
Composition comments Continuous filament glass fiber (type E, R, D, S2) of silicon, aluminum, calcium, boron and
magnesium oxides in a vitreous amorphous state. Filament diameter r>3um CAS 65997-17-
3: >99% w/w
4. First-aid measures
Description of first aid measures
Inhalation With any sign of respiratory distress, affected persons should be taken into fresh air and made
to rest while medical attention is sought.
Ingestion If fiber from the product is ingested, immediately rinse mouth repeatedly with water. If
swallowing has occurred, do not induce vomiting. If requested, give affected person sips of
water. Seek medical attention.
Skin Contact In case of contact with the product or the cured product dust or particulates, immediately wash
skin with mild soap and water. Use a washcloth to help remove fibers. To avoid further
irritation, do not scratch irritated areas. Rubbing or scratching may force the fibers into the
skin. Get medical attention immediately if the irritation persists.
Eye contact Contamination by fiber should be removed by flushing with water for at least 15 minutes.
Seek medical attention if irritation persists.
Most important symptoms and effects, both acute and delayed
General information Filaments are mechanical irritants and may induce temporary mouth, nose and throat
irritation. Skin or eye contact may cause itching and temporary irritation. Ingestion may cause
temporary mechanical irritation of the digestive tract. Pre-existing conditions such as
respiratory or skin disorders may be aggravated by exposure to the product or dust/particulate
generated from machining/grinding of the cured product.
Indication of immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations. If in doubt, get medical attention promptly.
5. Fire-fighting measures
Extinguishing media
2/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Suitable extinguishing mediaExtinguish with foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
3/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Special hazards arising from the substance or mixture
Specific hazards If aluminum coated fiberglass (thorstrand) is used as the substrate, must be in accordance
with NFPA 651. Dust or particles from machining, grinding or sawing the product should no
be exposed to moisture as it may liberate hydrogen gas and form explosive air mixures.
Hazardous combustion
products
In an emergency situation leading to elevated temperature, there may be release of toxic
gases and vapours. The products of combustion and decomposition will depend on other
materials present in the fire and the actual conditions of the fire.
Advice for firefighters
Special protective equipment
for firefighters
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
clothing.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions Avoid contact with skin, eyes or clothing.
Environmental precautions
Environmental precautionsDue to the physical nature of this product, environmental release to drains and water courses
is not possible.
Methods and material for containment and cleaning up
Methods for cleaning up Clean up material and put into a suitable container and dispose of properly (See Section 13).
Reference to other sectionsFor personal protection, see Section 8. Collect and dispose of spillage as indicated in Section
13.
7. Handling and storage
Precautions for safe handling
Usage precautions Storage: Keep container tightly closed and dry.
Conditions for safe storage, including any incompatibilities
Storage precautions Store in tightly-closed, original container. Keep container dry.
Specific end uses(s)
Specific end use(s) As this product is an article, this section is not applicable.
4/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
8. Exposure Controls/personal protection
Control parameters
Occupational exposure limits
Long-term exposure limit (8-hour TWA): 1 f/cc 5 mg/m continuous filament glass fibers
Exposure controls
Protective equipment

Appropriate engineering
controls
Provide adequate ventilation.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible.
Hand protection It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC).
Rubber (natural, latex).
Other skin and body
protection
Wear appropriate clothing to prevent any possibility of skin contact.
Hygiene measures Wash hands at the end of each work shift and before eating, smoking and using the toilet.
Respiratory protection Wear a suitable dust mask.
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Appearance White or aluminum coated fibers woven into fabric of varying weight and thickness, depending
on the style, with no distinctive odor.
Color White.
Odor No characteristic odor.
Odor threshold Not relevant due to the physical form of this product.
pH Not relevant due to the physical form of this product.
Melting point 700C / 1292F C 1220F / 660C Aluminum
Initial boiling point and rangeNot relevant due to the physical form of this product.
Flash point Not relevant due to the physical form of this product.
Evaporation rate Not relevant due to the physical form of this product.
Evaporation factor Not relevant due to the physical form of this product.
Upper/lower flammability or
explosive limits
Not relevant due to the physical form of this product.
Vapor pressure Not relevant due to the physical form of this product.
Vapor density Not relevant due to the physical form of this product.
Relative density Not relevant due to the physical form of this product.
Solubility(ies) Not relevant due to the physical form of this product.
5/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Auto-ignition temperatureNot relevant due to the physical form of this product.
Viscosity Not relevant due to the physical form of this product.
Explosive properties The mixture does not meet the criteria for explosive in accordance with GHS.
Explosive under the influence
of a flame
The mixture does not meet the criteria for explosive in accordance with GHS.
Oxidizing properties Does not meet the criteria for classification as oxidizing.
Comments The indicated values do not necessarily correspond to the product specification. Please refer
to the technical data sheet for specification data.
10. Stability and reactivity
Stability Stable at normal ambient temperatures and when used as recommended.
Possibility of hazardous
reactions
Not relevant.
Conditions to avoid Avoid heat, flames and other sources of ignition.
Materials to avoid For Thorstrand: Dilute hydrochloric acid, sulfuric acid, potassium hydroxide and sodium
hydroxide.
Hazardous decomposition
products
Does not decompose when used and stored as recommended. In an emergency situation
leading to elevated temperature, there may be release of toxic gases and vapors. The
products of combustion and decompostion will depend on other materials present in the fire
and the actual conditions of the fire.
11. Toxicological information
Information on toxicological effects
Toxicological effects Continuous filament fiber is listed by the International Agency for Research on Cancer (IARC)
as a group 3 (not classifiable as a human carcinogen).
Carcinogenicity
IARC carcinogenicity IARC Group 3 Not classifiable as to its carcinogenicity to humans.

Inhalation May cause respiratory system irritation.
Ingestion None expected under normal conditions of use. Ingestion is not an expected route of industrial
exposure.
Skin Contact Contact may cause mechanical irritation, skin redness, itching and drying of the skin.
Prolonged or repeated contact may cause allergic skin reaction, dermatitis and possible
sensitization.
Eye contact May cause mechanical irritation.
Medical considerations Preexisting eye, skin or respiratory disorders may be aggravated by exposure to this product.
12. Ecological Information
Ecotoxicity No ecological data has been determined on the total product.
Toxicity
Toxicity Not regarded as dangerous for the environment.
6/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Persistence and degradability
Persistence and degradabilityNot relevant due to the physical form of this product.
Bioaccumulative potential
Bio-Accumulative PotentialNot relevant due to the physical form of this product.
Mobility in soil
Mobility Not relevant due to the physical form of this product.
Results of PBT and vPvB assessment
Other adverse effects
13. Disposal considerations
Waste treatment methods
General information Materials for disposal should be placed in appropriate sealed containers to avoid potential
human and environmental exposure. It is the responsibility of the generator to comply with all
federal, state, provincial and local laws and regulations. We recommend that you contact an
appropriate waste disposal contractor and environmental agency for relevant laws and
regulations. Under the U.S., Resource Conservation and Recovery Act (RCRA), it is the
responsibility of the user of the product to determine at the time of disposal, whether the
product meets relevant waste classification and to assure proper disposal.
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.
14. Transport information
General Not regulated.
UN Number
This product is not dangerous to transport.
UN proper shipping name
This product is not dangerous to transport.
Transport hazard class(es)
This product is not dangerous to transport.
7/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Packing group
This product is not dangerous to transport.
Environmental hazards
Environmentally Hazardous Substance
No.
Special precautions for user
This product is not dangerous to transport.
15. Regulatory information
SNUR Not Applicable
International Regulations
US Federal Regulations
SARA Section 302 Extremely Hazardous Substances Tier II Threshold Planning Quantities
Not listed.
CERCLA/Superfund, Hazardous Substances/Reportable Quantities (EPA)
Not listed.
SARA Extremely Hazardous Substances EPCRA Reportable Quantities
Not listed.
SARA 313 Emission Reporting
Not listed
RCRA RCRA Information: Currently, the product is not listed in the federal hazardous waste
regulation 40 CFR, Part 261.33, paragraphs (E) or (F), ie. chemical products that are
considered hazardous if they become waste. State or local hazardous waste regulations may
also apply if they are different from the federal regulation. It is the responsibility of the user of
the product to determine at the time of disposal, whether the product meets relevant waste
classification and to assure proper disposal.
SARA (311/312) Hazard Categories
None.
US State Regulations
California Proposition 65 Carcinogens and Reproductive Toxins
This product contains no listed substances known to the State of California to cause cancer, birth
defects or other reproductive harm, at levels which would require a warning under the statute.
Inventories
US – TSCA
This product is an article as defined by TSCA and is not required to be listed in the TSCA inventory.
US – TSCA 12(b) Export Notification
Not listed.
8/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
16. Other information
Abbreviations and acronyms
used in the safety data sheet
ACGIH American Conference of Industrial Hygienists
ATE Acute Toxicity Estimate
CAS# Chemical Abstracts Service Number
CERCLA Comprehensive Environmental Response, Compensation, and Liability Act
DOT Department of Transportation
EmS Emergency Response Procedures for Ships Carrying Dangerous Goods
EPA Environmental Protection Agency
GHS Global Harmonized System
HMIS Hazardous Materials Identification System
IATA International Air Transport Association
ICAO International Civil Aviation Organization
IMDG International Maritime Dangerous Goods
Kow Octanol-water partition coefficient
LC50 Lethal concentration to 50% of a test population
LD50 Lethal dose to 50% of a test population
n.o.s. Not otherwise specified
OSHA Occupational Safety and Health Administration
PNEC Predicted No Effect Concentration
PPE Personal Protection Equipment
RCRA Resource Conservation and Recovery Act
SADT Self-accelerating decomposition temperature
SARA Superfund Admendments and Reauthorization Act
STOT Specific Target Organ Toxicity
(STOT) RE Repeated Exposure
(STOT) SE Single Exposure
TSCA Toxic Substance Control Act
UN United Nations
VOC Volatile Organic Compound
WHMIS Workplace Hazardous Materials Information System
General information Handling practices for aluminum materials must be in accordance with NFPA 651, Chapters
1-5. Dust or particulate from machining the product should not be exposed to moisture as it
may liberate hydrogen gas and form explosive mixtures.
Issued by U.S.A. Product Safety Department
Revision date 5/1/2015
Revision 0
Hazard statements in fullUSH01 May form combustible dust concentrations in air.
ACA HMIS Health rating. Slight hazard. (1)
ACA HMIS Flammability
rating.
Will not burn. (0)
ACA HMIS Physical hazard
rating.
Normally stable. (0)
ACA HMIS Personal
protection rating.
F
9/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Wherever such words or phrases as “hazardous,” “toxic,” “carcinogen,” etc. appear herein, they are used as a defined or
described under state employee right-to-know laws, Federal OSHA laws or the direct sources for these lawssuch as the
International Agency for Research on Cancer (IARC), the National Toxicology Program (NTP), etc. The use of such words or
phrases should not be taken to mean that we deem or imply any substance or exposure to be toxic, hazardous or otherwise
harmful. Any exposure can only be understood within the entire context of its occurrence, which includes such factors as the
substance’s characteristics as defined in the SDS, amount and duration of exposures, other chemicals present and
preexistingindividual differences in response to the exposure. The data provided in this SDS is based on the information
received from our raw material suppliers and other sources believed to be reliable. We are supplying you this data solely in
compliance with the Federal OSHA Hazard Communication Standard, 29 CFR 1910.1200 and the Federal and State laws as
described in Section 15: Regulatory Information. The information contained in this SDS is proprietary and confidential to
HexcelCorporation. This SDS and the information in it are not to be used for purposes other than compliance with the
Federal OSHA Hazard Communication Standard. If you have received this SDS from any other source than Hexcel
Corporation or its authorized agent, the information contained in it may have been modified from the original document and it
may not be the most current revision. Liability, if any, for use of this product is limited to the terms contained in our sale terms
and conditions. We do not in any way warrant (expressed or implied, including any implied warranty for merchantability or
fitness for a particular purpose) the data contained or the product described in this SDS. Additionally, we do not warrant that
the product will not infringe any patent or other proprietary or property rights of others.
10/10

15T3003K60_SDS.pdf

by | Sep 27, 2025

SAFETY DATA SHEET
SPUNFAB –
DRY ADHESIVE TECHNOLOGIES PA1203 Spunfab
AaRESVE FABRICS CS
SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION
Company:
KEUCHEL ASSOCIATES INC / SPUNFAB LTD
175 MUFFIN LANE
CUYAHOGA FALLS, OH, 44223
Product Information:
Product Name: SPUNFAB @ ADHESIVE FABRICS PA1203 SERIES
Emergency Information:
EMERGENCY PHONE = (330) 945-9455 (8:30 AM – 4:30 PM EST)
ee
SECTION 2 – HAZARDS IDENTIFICATION
PRIMARY ROUTES OF ENTRY:
Eye Contact: Currently, no acute or chronic effects are known.
Skin Contact: Currently, no acute or chronic effects are known. Molten material will produce thermal bums.
Ingestion: No acute or chronic effects are known. It is reasonable to anticipate ingestion of fabric would
be irritating to the Gl tract.
Inhalation: Currently, no acute or chronic effects are known. Vapors from burning may be irritating
Chronic Toxicity: No effects from chronic exposure are known.
N/E = Not Established N/A = Not Applicable * = See Miscel.
SECTION 3 – COMPOSITION/INFORMATION ON INGRGDIENTS:
IDENTITY CAS NO. % PEL TLV
Copolyamide proprietary >97 NE NE
Caprolactam 105-60-2 <2 NIE 0.25 PPM Additive Proprietary <1 NIE NE SECTION 4 - FIRST AID MEASURES Suggested First Aid: Ingestion: No harmful effects are anticipated if the Fabrics are swallowed. See a physician if the ittation persists Inhalation: | No harmful effects are anticipated from breathing fuzz or a low concentration of vapors. If a problem develops, remove person to fresh air and supply oxygen if necessary. SECTION 5 - FIRE-FIGHTING MEASURES Extinguishing Media: Water spray, carbon dioxide, foam or dry chemical. SDS-PA1203 Series Rev 5/28/2015 Page 1 of 3

15T3003K50_SDS.pdf

by | Sep 27, 2025

CFA 004 SDS-2 Carbon Fiber $ZG 4 INTERNAL USE.doc (07/08/2018 11:16:35)
SAFETY DATA SHEET
Carbon Fiber “TORAYCA” Sizing Type “4”
1, IDENTIFICATION
1.1 NAME OF MANUFACTURER/SUPPLIER
ADDRESS: Toray Carbon Fibers America, Inc.; 2030 Highway 20; Decatur, AL 35602
1.2. SAFETY MANAGER
Plant Site:
Dept.: Production Department
Manager: Safety, Environmental & Health Manager
Sales:
Dept.: Sales Department
Manager: Director of Sales Department
1.3. SDS MANAGER g
Dept.: Technical Center cca
Manager: Director of Technical Center ne
1.4 INFORMATION CENTER (CUSTOMER SERVICE CENTER)
Section: Technical Center – Toray Carbon Fibers America, Inc.
Address: 2030 Highway 20, Decatur, AL35602
TEL. #: (256) 260-2626; contact: Diteecfor of Technical Center
| FAX #: (256) 260-1063 aw
Eee
2. HAZARDS IDENTIFICATION (Environmental, Safety and Health)
2.1 CLASS NAME OF HAZARDOUS CHEMICALS FOR MSDS
Non-hazardous material
2.2 PHYSICAL & CHEMICAL HAZARDS
Explosive; N/A
2.3 ADVERSE HUMAN HEALTH EFFECTS
| Acute Toxic Substance: No case of disease, which is caused by Carbon Fiber, has been
reported, Short fiber, for example particles or fly, can cause transient skin irritation.
2.4 ENVIRONMENTAL EFFECTS
. 2.4.1 Carbon Fiber is electrically conductive, and it can cause the short-circuiting of electrical
equipment.
2.4.2′ Airborne Carbon Fiber can also disturb electrical equipment.
CFA-004 SDS 2 Page 1 of 6
. 10f6