by | Sep 27, 2025
Page 1 of 8
SAFETY DATA SHEET
Date issued: | 1/05/2013
SDS number : CHALLENGE 95
Date revised : 06/03/2022
ENTERPRISES Revision number : 3
CHALLENGE 95
1. Identification
Product identifier: CHALLENGE 95
Relevant identified uses: Release agent
Manufacturer / Supplier Emergency telephone number (24 hour)
BJB Enterprises, Inc. CHEMTREC (USA & Canada): (800) 424-9300
14791 Franklin Avenue or (703) 527-3887 CCN# 2820
Tustin, CA 92780
Emergency Phone: (714) 734-8450
2. Hazard identification
Classification of the substance or mixture
Health hazards:
Skin Irritation, Category 2
Eye Irritation, Category 2A
Reproductive Toxicity, Category 2
Target Organ Toxicity (Single exposure), Category 3
Target Organ Toxicity (Repeated exposure), Category 1
Aspiration Hazard, Category 1
Environmental hazards:
Chronic Hazards to the Aquatic Environment, Category 2
Physical hazards:
Flammable Liquids, Category 2
Label elements
Flame Health hazard Exclamation Environment
mark
Signal word: DANGER
Hazard statement(s)
H225: Highly flammable liquid and vapour.
H315: Causes skin irritation.
H3 19: Causes serious eye irritation.
H361: Suspected of damaging fertility or the unbom child.
H336: May cause drowsiness or dizziness.
H372: Causes damage to organs through prolonged or repeated exposure.
H304: May be fatal if swallowed and enters airways.
H4 11: Toxic to aquatic life with long lasting effects.
Precautionary statement(s)
Prevention:
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
by | Sep 27, 2025
Able Industrial Products Inc.
SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME: AMT 660P
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF x
PRODUCT: Mold-making Rubber
SUPPLIER’S DETAILS: Able Industrial Products
2006 S Baker Ave
Ontario, Calif. 91761
909-930-1585
Fax 909-930-1587
EMERGENCY CONTACT: CHEMTREC (24 Hours):1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Not Classified
HEALTH HAZARDS Not Classified
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS None
SIGNAL WORDS None
HAZARD STATEMENTS None
PRECAUTIONARY STATEMENTS
[PREVENTION] None
[RESPONSE] None
[STORAGE] None
[DISPOSAL] None
3. COMPOSITION AND INFORMATION ON INGREDIENTS
GHS GT60P printed: 02/12/18 page 1 of 5
by | Sep 27, 2025
Able Industrial Products Inc.
SAFETY DATA SHEET
GHS GT60P printed: 02/12/18 page 1 of 5
1.PRODUCT IDENTIFICATION
TRADE NAME: AMT 660P
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF
PRODUCT:
Mold-making Rubber
SUPPLIER S DETAILS: Able Industrial Products
2006 S Baker Ave
Ontario, Calif. 91761
909-930-1585
Fax 909-930-1587
EMERGENCY CONTACT: CHEMTREC (24 Hours):1-800-424-9300
2.HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Not Classified
HEALTH HAZARDS Not Classified
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS None
SIGNAL WORDS None
HAZARD STATEMENTS None
PRECAUTIONARY STATEMENTS
[PREVENTION] None
[RESPONSE] None
[STORAGE] None
[DISPOSAL] None
3.COMPOSITION AND INFORMATION ON INGREDIENTS
Able Industrial Products
SAFETY DATA SHEET
GHS GT60P printed: 02/12/18 page 2 of 5
Substance or Mixture Mixture
Hazardous Ingredients CAS# Percentage (%)
Quartz 14808-60-7 30-40
*Quartz or crystalline silica is considered to be a nuisance dust. All hazards associated with the
substance are only applicable when the substance is in its respirable form. However, crystalline silica is
not expected to be hazardous when compounded into a liquid polymer like its current state in this
product because it is no longer respirable under normal conditions. Therefore, all hazards associated
with respirable quartz are not listed.
4.FIRST AID MEASURES
INGESTION: Seek medical attention; Do NOT induce vomiting.
SKIN CONTACT: Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
INHALATION: No first aid should be needed. Remove to fresh air.
EYE CONTACT: Immediately flush with COOL water for 15 minutes; Call a
physician if irritation persists.
PROTECTION FOR FIRST-
AIDERS:
A rescuer should wear personal protective equipment, such as
rubber gloves and air-tight goggles
5.FIRE-FIGHTING MEASURES
SUITABLE EXTINGUISHING
MEDIA:
Foam, carbon dioxide, dry chemical
SPECIFIC FIRE HAZARDS: Fire will form hazardous combustion gases of carbon dioxide
(CO2), carbon monoxide (CO), SiO2, and oxides of nitrogen (NOx).
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150
o
C.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
FIREFIGHTER EQUIPMENT: Wear respirator and all protective coverings.
6.ACCIDENTAL RELEASE MEASURES
PERSONAL PRECATIONS,
PROTECTIVE EQUIPMENT AND
EMERGENCY:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
ENVIRONMENTAL
PRECAUTIONS:
Prevent product from entering drains.
CLEAN UP: Scrape up and disposed of in accordance with appropriate laws
and regulations.
7.HANDLING AND STORAGE
Able Industrial Products
SAFETY DATA SHEET
GHS GT60P printed: 02/12/18 page 3 of 5
HANDLING: Wear protective equipment; Avoid contact with skin and eyes.
STORAGE: Keep container tightly closed. Store in a cool, dry place. Keep
away from oxidizing material.
8.EXPOSURE CONTROLS AND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous Ingredient CAS# Limit/Set by
Quartz 14808-60-7 For Respirable Dust – TWA: 0.025mg/m3(ACGIH),
0.3mg/m3(OSHA)
ENGINEERING CONTROLS: None Available
PERSONAL PROTECTIVE
EQUIPMENT:
RESPIRATORY PROTECTION: Not required under normal use
HAND PROTECTION Protective gloves
EYE PROTECTION Wear safety glasses or goggles. Face shield if situation requires
SKIN AND BODY PROTECTION Protective clothing if situation requires
9.PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Flowable Paste
ODOR: No Odor
ODOR THRESHOLD: Not Available
pH: Not Available
MELTING POINT: Not Available
BOILING POINT RANGE: Not Applicable, will decompose before it will boil
FLASH POINT: >205
o
F (Setaflash)
EVAPORATION RATE: Not Available
FLAMMABILITY(solid/gas): Not Available
EXPLOSION LIMITS:
UPPER Not Available
LOWER Not Available
VAPOR PRESSURE: <0.1mbar @ 68
o
F
VAPOR DENSITY: All vapors are denser than air
RELATIVE DENSITY: 1.36 g/mL
SOLUBILITY: Not soluble in water
PARTITION COEFFICIENT: N-
OCTANOL/WATER: Not Available
AUTO-IGNITION TEMPERATURE: Not Available
DECOMPOSITION
TEMPERATURE: >150
o
C
VISCOSITY: 53,000 cP
10.STABILITY AND REACTIVITY
Able Industrial Products
SAFETY DATA SHEET
GHS GT60P printed: 02/12/18 page 4 of 5
REACTIVITY: Product is designed to react with a catalyst to initiate
vulcanization.
CHEMICAL STABILITY: Stable in the absence of contamination
HAZARDOUS REACTIONS: None
CONDITIONS TO AVOID: Avoid contact with strong acids, alkalis, and oxidizing agents.
HAZARDOUS DECOMPOSITION
PRODUCTS:
Hazardous combustion gases of carbon dioxide(CO2), carbon
monoxide(CO), SiO2, and oxides of nitrogen (NOx).
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150
o
C.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
INCOMPATIBILITY: Acids, Alkalis, Oxidizing Agents
11.TOXICOLOGICAL INFORMATION
ACUTE TOXICITY: Oral LD50(Rat): 8186 mg/kg (calculated from known toxicities)
SKIN CORROSION/IRRITATION: Not Available
EYE DAMAGE/IRRITATION: Not Available
RESPIRATORY OR SKIN
SENSITATION:
Not Available
GERM CELL MUTAGENICITY: Not Available
CARCINOGENICITY: Quartz (CAS 14808-60-7) is listed by the IARC and the NTP to
cause cancer in humans.
REPRODUCTIVE TOXICITY: Not Available
STOST- SINGLE EXPOSURE: Not Available
STOST- REPEATED EXPOSURE: Not Available
ASPIRATION HAZARD: Not Available
12.ECOLOGICAL INFORMATION
ECOTOXICITY: Do not allow to enter soil, waterways or waste water canal. It is
not allowed to be released into biological sewage treatment
plants. Ecological data is not available.
PERSISTENCE/DEGRADABILITY: Not Available
BIOACCUMULATIVE POTENTIAL: Not Available
MOBILITY IN SOIL: Not Available
13.DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a
chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local
regulations when disposing of the substance.
14.TRANSPORT INFORMATION
UN/NA Number: Not Regulated
DOT SHIPPING NAME: Not Regulated
DOT HAZARD CLASS: Not Regulated
IMDG P.S.N.: Not Regulated
Able Industrial Products
SAFETY DATA SHEET
GHS GT60P printed: 02/12/18 page 5 of 5
IMDG CLASS: Not Regulated
IMDG PACKING GROUP: Not Regulated
IMDG Marine Pollutant: Not Regulated
IATA – P.S.N.: Not Regulated
IATA – CLASS: Not Regulated
IATA PACKING GROUP: Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Regulations, ADR, RID, and the ADN.
15.REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTING REQUIREMENTS: The components of this product are subject to the reporting
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 CFR 355,
Appendix A)
SARA 304
(40 CFR Table
302.4)
SARA 313
(40 CFR 372.65)
Quartz, Amorphous Silica No No No
U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.S. CERCLA REPORTABLE QUANTITY (RQ): None
SARA 311/312(40 CFR 370) HAZARDS: Acute: No, Chronic: No, Fire: No, Pressure: No
CALIFORNIA, (PROPOSITION 65): Quartz, Crystalline silica
TSCA INVENTORY STATUS: These materials or all of their contents are listed on the Toxic Substances
Control Act (TSCA).
16. OTHER INFORMATION
HMIS Rating: Health-1, Fire-0, Reactive-0
This product contains crystalline silica which is hazardous if it is inhaled. However, in this product, the silica is
wetted out with various polyorganosiloxanes to where it is no longer in powder form, meaning it is incapable of
becoming airborne under normal use conditions. Because the product is a mixture, the majority of the data
used was transferred from the safety data sheets of the product s hazardous ingredients, whose manufacturer
identity we wish to remain anonymous for competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made.
Date Created/Revised: 2/17/2020 Name Change Made By: Rick Viramontes
by | Sep 27, 2025
Able Industrial Products Inc.
SAFETY DATA SHEET
1, PRODUCT IDENTIFICATION
TRADE NAME: AMT 660P
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF +
PRODUCT: Mold-making Rubber
SUPPLIER’S DETAILS: Able Industrial Products
2006 S Baker Ave
Ontario, Calif. 91761
909-930-1585
Fax 909-930-1587
EMERGENCY CONTACT: CHEMTREC (24 Hours):1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Not Classified
HEALTH HAZARDS Not Classified
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS None
SIGNAL WORDS None
HAZARD STATEMENTS None
PRECAUTIONARY STATEMENTS
[PREVENTION] None
[RESPONSE] None
[STORAGE] None
[DISPOSAL] None
3. COMPOSITION AND INFORMATION ON INGREDIENTS
GHS GT60P printed: 02/12/18 page 1 of 5
by | Sep 27, 2025
Able Industrial Products.
_ C(i CSARETY DATASHEET 0000000
1, PRODUCT IDENTIFICATION
TRADE NAME: AMTS595P-01
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF ;
PRODUCT: Mold-making Rubber
SUPPLIER’S DETAILS: Able Industrial Products
2006 S Baker Ave
Ontario, Calif 91761
909-930-1585 Fax 909-930-1587
EMERGENCY CONTACT: CHEMTREC (24 Hours):1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Not Classified
HEALTH HAZARDS Not Classified
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS None
SIGNAL WORDS None
HAZARD STATEMENTS None
PRECAUTIONARY STATEMENTS
[PREVENTION] None
[RESPONSE] None
[STORAGE] None
[DISPOSAL] None
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture Mixture ~
_ Hazardous Ingredients… ASI cee POM ADE (W) eee
None
AMT 595 SDs Data Sheet printed: 06/22/22 page 1 of 5
by | Sep 27, 2025
Able Industrial Products , Inc.
SAFETY DATA SHEET
GHS GT40P printed: 02/12/18 page 1 of 5
1.PRODUCT IDENTIFICATION
TRADE NAME: AMT 440P
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF
PRODUCT:
Mold-making Rubber
SUPPLIER S DETAILS: Able Industrial Products
2006 S BAker Ave
Onatrio, Calif. 91761
909-930-1585
Fax 909-930-1587
EMERGENCY CONTACT: CHEMTREC (24 Hours):1-800-424-9300
2.HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Not Classified
HEALTH HAZARDS Not Classified
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS None
SIGNAL WORDS None
HAZARD STATEMENTS None
PRECAUTIONARY STATEMENTS
[PREVENTION] None
[RESPONSE] None
[STORAGE] None
[DISPOSAL] None
3.COMPOSITION AND INFORMATION ON INGREDIENTS
Able Industrial Products , Inc.
SAFETY DATA SHEET
GHS GT40P printed: 02/12/18 page 2 of 5
Substance or Mixture Mixture
Hazardous Ingredients CAS# Percentage (%)
Quartz 14808-60-7 25-35
*Quartz or crystalline silica is considered to be a nuisance dust. All hazards associated with the
substance are only applicable when the substance is in its respirable form. However, crystalline silica is
not expected to be hazardous when compounded into a liquid polymer like its current state in this
product because it is no longer respirable under normal conditions. Therefore, all hazards associated
with respirable quartz are not listed.
4.FIRST AID MEASURES
INGESTION: Seek medical attention; Do NOT induce vomiting.
SKIN CONTACT: Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
INHALATION: No first aid should be needed. Remove to fresh air.
EYE CONTACT: Immediately flush with COOL water for 15 minutes; Call a
physician if irritation persists.
PROTECTION FOR FIRST-
AIDERS:
A rescuer should wear personal protective equipment, such as
rubber gloves and air-tight goggles
5.FIRE-FIGHTING MEASURES
SUITABLE EXTINGUISHING
MEDIA:
Foam, carbon dioxide, dry chemical
SPECIFIC FIRE HAZARDS: Fire will form hazardous combustion gases of carbon dioxide
(CO2), carbon monoxide (CO), SiO2, and oxides of nitrogen (NOx).
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150
o
C.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
FIREFIGHTER EQUIPMENT: Wear respirator and all protective coverings.
6.ACCIDENTAL RELEASE MEASURES
PERSONAL PRECATIONS,
PROTECTIVE EQUIPMENT AND
EMERGENCY:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
ENVIRONMENTAL
PRECAUTIONS:
Prevent product from entering drains.
CLEAN UP: Scrape up and disposed of in accordance with appropriate laws
and regulations.
7.HANDLING AND STORAGE
Able Industrial Products , Inc.
SAFETY DATA SHEET
GHS GT40P printed: 02/12/18 page 3 of 5
HANDLING: Wear protective equipment; Avoid contact with skin and eyes.
STORAGE: Keep container tightly closed. Store in a cool, dry place. Keep
away from oxidizing material.
8.EXPOSURE CONTROLS AND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous Ingredient CAS# Limit/Set by
Quartz 14808-60-7 For Respirable Dust – TWA: 0.025mg/m3(ACGIH),
0.3mg/m3(OSHA)
ENGINEERING CONTROLS: None Available
PERSONAL PROTECTIVE
EQUIPMENT:
RESPIRATORY PROTECTION: Not required under normal use
HAND PROTECTION Protective gloves
EYE PROTECTION Wear safety glasses or goggles. Face shield if situation requires
SKIN AND BODY PROTECTION Protective clothing if situation requires
9.PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Flowable Paste
ODOR: No Odor
ODOR THRESHOLD: Not Available
pH: Not Available
MELTING POINT: Not Available
BOILING POINT RANGE: Not Applicable, will decompose before it will boil
FLASH POINT: >205
o
F (Setaflash)
EVAPORATION RATE: Not Available
FLAMMABILITY(solid/gas): Not Available
EXPLOSION LIMITS:
UPPER Not Available
LOWER Not Available
VAPOR PRESSURE: <0.1mbar @ 68
o
F
VAPOR DENSITY: All vapors are denser than air
RELATIVE DENSITY: 1.35 g/mL
SOLUBILITY: Not soluble in water
PARTITION COEFFICIENT: N-
OCTANOL/WATER: Not Available
AUTO-IGNITION TEMPERATURE: Not Available
DECOMPOSITION
TEMPERATURE: >150
o
C
VISCOSITY: 44,200 cP
10.STABILITY AND REACTIVITY
Able Industrial Products , Inc.
SAFETY DATA SHEET
GHS GT40P printed: 02/12/18 page 4 of 5
REACTIVITY: Product is designed to react with a catalyst to initiate
vulcanization.
CHEMICAL STABILITY: Stable in the absence of contamination
HAZARDOUS REACTIONS: None
CONDITIONS TO AVOID: Avoid contact with strong acids, alkalis, and oxidizing agents.
HAZARDOUS DECOMPOSITION
PRODUCTS:
Hazardous combustion gases of carbon dioxide(CO2), carbon
monoxide(CO), SiO2, and oxides of nitrogen (NOx).
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150
o
C.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
INCOMPATIBILITY: Acids, Alkalis, Oxidizing Agents
11.TOXICOLOGICAL INFORMATION
ACUTE TOXICITY: Oral LD50(Rat): 13,537 mg/kg (calculated from known toxicities)
SKIN CORROSION/IRRITATION: Not Available
EYE DAMAGE/IRRITATION: Not Available
RESPIRATORY OR SKIN
SENSITATION:
Not Available
GERM CELL MUTAGENICITY: Not Available
CARCINOGENICITY: Quartz (CAS 14808-60-7) is listed by the IARC and the NTP to
cause cancer in humans.
REPRODUCTIVE TOXICITY: Not Available
STOST- SINGLE EXPOSURE: Not Available
STOST- REPEATED EXPOSURE: Not Available
ASPIRATION HAZARD: Not Available
12.ECOLOGICAL INFORMATION
ECOTOXICITY: Do not allow to enter soil, waterways or waste water canal. It is
not allowed to be released into biological sewage treatment
plants. Ecological data is not available.
PERSISTENCE/DEGRADABILITY: Not Available
BIOACCUMULATIVE POTENTIAL: Not Available
MOBILITY IN SOIL: Not Available
13.DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a
chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local
regulations when disposing of the substance.
14.TRANSPORT INFORMATION
UN/NA Number: Not Regulated
DOT SHIPPING NAME: Not Regulated
DOT HAZARD CLASS: Not Regulated
IMDG P.S.N.: Not Regulated
Able Industrial Products , Inc.
SAFETY DATA SHEET
GHS GT40P printed: 02/12/18 page 5 of 5
IMDG CLASS: Not Regulated
IMDG PACKING GROUP: Not Regulated
IMDG Marine Pollutant: Not Regulated
IATA – P.S.N.: Not Regulated
IATA – CLASS: Not Regulated
IATA PACKING GROUP: Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Regulations, ADR, RID, and the ADN.
15.REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTING REQUIREMENTS: The components of this product are subject to the reporting
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 CFR 355,
Appendix A)
SARA 304
(40 CFR Table
302.4)
SARA 313
(40 CFR 372.65)
Quartz, Amorphous Silica No No No
U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.S. CERCLA REPORTABLE QUANTITY (RQ): None
SARA 311/312(40 CFR 370) HAZARDS: Acute: No, Chronic: No, Fire: No, Pressure: No
CALIFORNIA, (PROPOSITION 65): Quartz, Crystalline silica
TSCA INVENTORY STATUS: These materials or all of their contents are listed on the Toxic Substances
Control Act (TSCA).
16. OTHER INFORMATION
HMIS Rating: Health-1, Fire-0, Reactive-0
This product contains crystalline silica which is hazardous if it is inhaled. However, in this product, the silica is
wetted out with various polyorganosiloxanes to where it is no longer in powder form, meaning it is incapable of
becoming airborne under normal use conditions. Because the product is a mixture, the majority of the data
used was transferred from the safety data sheets of the product s hazardous ingredients, whose manufacturer
identity we wish to remain anonymous for competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made.
Date Created/Revised: 2/12/18 Made By: Daniel Shaw
by | Sep 27, 2025
Able Industrial Products, Inc.
SAF,ETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
IDENTIFICATTON:
RECOMMENDED USE OF
PRODUCT:
SUPPLIERS DETAILS:
EMERGENCY CONTACT:
AMTCAT.44OP
Curing Agent for Mold-making Rubber
Able Industrial Products
2006 S Baker Ave
Onatrio, Calif. 91761
909-930-1585
Fax 909-930-1587
CHEMTREC (24 Hours): 1-800-424-9300
2, HAZARDS IDENTIFICATION
GHS CLASSIFTCATION
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
P R EA UNO NA R Y STA TE M E N TS
IPREVENTTONJ
IRESPONSEJ
[SToRAGE]
Not Classified
Skin Irritation/Corrosion – Category 3
Reproductive Toxicity – Category 2
Not Classified
Warning
H316: Causes mild skin irritation
H361: Suspected of damaging fertility or the unborn child
P201: Obtain special instructions before use
P202: Do not handle until all safety precautions have been read
and understood
P2B1: Use personal protective equipment as required
P30B+313: IF exposed or concerned: Get medical advice/attention
P332+P313-If skin irritation occursr Get medical advice/attention.
P405: Store locked up
AMTCAT440P Data Sheet (003) printed: 04108122 page 1 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
IDISPOSALJ P501-Dispose of contents/container through a waste management
company authorized by the local government.
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
3-[(dimethylsilyl)oxy]- 1, 1,5,5-
tetramethyl-3-phenyltrisiloxa ne
Octa methylcyclotetrasiloxa ne
Mixture
CAS# (7e)
rgo27-45-7
556-67-2
5-10
0.1-1
4. FIRST AID MEASURES
INGESTION:
SKIN CONTACT:
TNHALATION:
EYE CONTACN
Never give anything by mouth to an unconscious person. Rinse
mouth out with water. Seek medical attention; Do NOT induce
vomiting.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
Remove to fresh air. Oxygen or artificial respiration if needed. Do
not use mouth-to-mouth method if victim inhaled the substance.
Induce artificial respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory medical device.
Call a physician if symptoms develop or persist.
Immediately flush with COOL water for 15 minutes. Remove
contact lenses. Call a physician if irritation persists.
A rescuer should wear personal protective equipment, such asPROTECTION FOR FIRST-
ATDERS: rubber and air-tioht ooooles
5. FIRE-FIGHTING MEASURES
S UTTA B L E EXTIN G UISHIN G
MEDTA:
SPECIFIC FIRE HAARDS:
Foam, Carbon Dioxide, Dry Chemical
Fire will form hazardous combustion gases of Carbon dioxide(COz)
and Carbon Monoxide(CO)
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
FIREFIGHTER EQUIPMENT: Wear respirator and all orotective coverinqs
6. ACCIDENTAL RELEASE MEASURES
AMTCAT44OP Data Sheet (003) printed: 04108122 page 2 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
PERSONAL PRECATIONS,
PROTECTIVE EQUIPMENT AND
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains
Disposeof in accordance with appropriate laws and requlations.
7. HANDLING AND STORAGE
HANDLTNG:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes.
Keep container tightly closed. Store in a cool, dry place. Keep away
from oxidizimaterialin a well-ventilated area. Store lockedUD.
B. EXPOSURE CONTROLSAND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous
3-[(dimethylsilyl)oxy]- 1, 1,5,5-
tetramethyl-3-phenyltrisi loxa ne
Octa methylcyclotetrasiloxa ne
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUTPMENT:
R ESPIRATOR Y PR OTECTIO N :
HAND PROTECNON
EYE PROTECNON
SKIN AND BODY PROTECNON
as# 9tt
18027-45-7Not established,
Not established,556-67-2
None Available
No required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
Protective clothinq if situation requires
9, PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POINN
BOILING POTNT RANGE:
FLASH POINN
EVAPORATION R.ATE:
FLA M MA B I LITY(s o I id /
g a s) :
EXPLOSTON LTMTTS:
UPPER
LOWER
VAPOR PRESSURE:
VAPOR DENSITY:
RELATIVE DENSITY:
SOLUBTLITY:
PARTITTON COEFFICIENT: N.
Liquid
No Odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>2050F
Not Available
Not Available
Not Available
Not Available
<0.1mbar @ 6BoF
All vapors are denser than air
1.0 g/ml
Not soluble in water
AMTCAT440P Data Sheet (003) printed: 04108122 page 3 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
OCTANOL/WATER:
A UTO - IG N ITTO N TEM P ERA TU R E :
DECOMPOSITION
TEMPERATURE:
VISCOSTTY:
Not Available
Not Available
> 1500c
12,000 cP
10. STABILITY AND REACTIVIW
REACTIVITY:
CHEMICAL STABILITY:
HAZARDOUS REACTIONS:
CONDITIONS TO AVOID:
HAZARDOUS D ECOMPO$TION
PRODUCTS:
INCOMPATIBTLITY:
Product is designed to react with its counterpart base containing
vinyl functional groups in the presence of a platinum catalyst.
Stable in the absence of contamination
None
Avoid contact with strong acid.
Hazardous combustion gases of Carbon dioxide(COz), Carbon
Monoxide(CO), SiOz, Contact with acids or bases releases
flammable hydrogen gas.
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
Acids, alkalis
1 1. TOXICOLOGICAL INFORMATION
ACUTE TOXTCITY:
sKrN coR RosroNfiRRrTATroN :
EYE DA MA G E/ IR RITATT O N :
RESPIRATORY OR SKIN
SENSITATTON:
GERM CELL MUTAGENTCITY:
CARCINOGENICITY:
REPROD UCTIVE TOXICITY:
STOST- SIN G L E EXPOS U R E :
STOST. REPEATED EXPOSURE:
ASPIRATION HAARD:
Not Available
3-[(dimethylsilyl)oxy]- 1, 1, 5, 5-tetramethyl-3-phenyltrisiloxane is
listed to cause skin irritation.
Not Available
Not Available
Not Available
Contains no known ingredients above the 0.lolowt threshold that
are listed as a carcinogen by IARC, ACGIH, NTP, or OSHA..
Suspected of damaging fertility or the unborn child. A two year
combined chronic/carcinogenicity assay was conducted on
octamethylcyclotetrasiloxane (D4). Fischer-344 rats were exposed
by whole body vapor inhalation 6 hours/day, 5 days/week for up to
103 weeks to 0, 10, 30, 150 or 700 ppm of D4. A statistically
significant increase in incidence of uterine endometrial cell
hyperplasia and uterine adenomas (benign tumors) were observed
in female rats at 700 ppm. Since these effects only occurred at 700
ppm, a level that greatly exceeds typical workplace or consumer
exposure/ it is unlikely that industrial, commercial or consumer uses
of products containing D4 would result in a significant risk to
humans.
3-[(dimethylsilyl)oxy] – 1, 1, 5, 5-tetramethyl-3-phenyltrisi loxane is
listed to may cause respiratory irritation through inhalation
Not Available
Not Available
12. ECOLOGICAL INFORMATION
AMTCAT44OP Data Sheet (003) printed: 04108122 page 4 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
ECOTOXICITY:
P E RSISTE N CE/ D EG RA DA BI LITY:
BIOA CC U M U LA TI VE PO TENTIA L :
MOBTLTTY TN SOTL:
Components Species Test Results
Octamethylcyclotetrasiloxane (CAS 556-67-2)
Aquatic
Fish LC50 Rainbow trout,donaldson trout 0.0085 – 0.013 mg/|, 14 days
Not Available
Partition coefficient n-octanol / water (log Kow)
Octa m ethylcyclotetrasiloxa ne (CAS 556-67 -2) 6.48, (25. 1’C
)
Not Available
13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations
when disposing of the substance.
14. TRANSPORT INFORMATION
UN/NA Number: Not Regulated
DOTSHIPPING NAME:
DOT HAZARD CLASS:
IMDG –
P.S,N.:
fiMDG _
CLASS:
EMDG – PACKING GROUP:
LMDG –
Marine Pollutant:
IATA – P.S.N.:
IATA. CLASS:
IATA –
PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Regulations, ADR, RID, and the ADN.
15. REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTfiNG REQUIREMENIS.’The components of this product are subject to the repoding
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 cFR 3s5
SARA 304
(40 CFR Table
SARA 313
(40 cFR 372.65)
302,
3-[(dimethylsilyl)oxy]-1,1,5,5- No No No
tetramethyl-3-phenyltrisiloxane
Octamethylcyclotetrasiloxane No No No
U.S, SARA THRESHOLD PLANNLNG QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.S. CERCLA REPORTABLE QUANTITY (RQ): None
AMTCAT440P Data Sheet (003) printed: 04108122 page 5 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
SARA 311/372(40 CFR 37O) HAZARDS; Acute: Yes, Chronic: Yes, Fire: No, Pressure: No
cA LLFO RNr+ (PROPOSITION 65,).. None
TSCA INVENTORY STATUS: These materials or all of their contents are listed on the Toxic Substances
Control Act (TSCA),
16, OTHER INFORMATION
HMIS Rating: Health-2, Fire-O, Reactive-O
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made.
Date Created/Revised: 2l 13l IB Made By: Daniel Shaw
AMTCAT44OP Data Sheet (003) printed: 04108122 page 6 of 6
by | Sep 27, 2025
Able Industrial Products
SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME? AMTCAT292RED-03 CAS560
RECOMMENDED USE OF PRODUCT: Curing Fast catalyst for condensation base
SUPPLIER S DETAILS:
Able Industrial Products
2006 S Baker ave
Ontario, Calif. 91761
Telephone: (909) 930-1585
Fax: (909) 930-9282
EMERGENCY CONTACT: 24 hour: ChemTel:
US and Canada: 1-800-255-3924
International: +1-813-248-0585
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Flammable – Category 3
HEALTH HAZARDS Acute Toxicity, Oral Category 5
Eye Irritation Category 1
STOT, Repeated Exposure Category 2 (Bladder)
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
AMTCAT292RED-03 CA-5560 Able Industrial Products page lof 8
by | Sep 27, 2025
EA
7] } d Able Industrial Products, Inc.
SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME: AMT242-01
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF Condensation Cure B:
PRODUCT: ees
SUPPLIER’S DETAILS: Able Industrial Products
2006 S Baker Ave
Ontario, Calif.91761
1-909-930-1585
Fax 1-909-930-1587
EMERGENCY CONTACT: CHEMTREC (24 Hours): 1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS Not Classified
HEALTH HAZARDS Reproductive Toxicity Category 2
ENVIRONMENTAL HAZARDS Not Classified
GHS LABEL ELEMENTS
PICTOGRAMS :
SIGNAL WORDS Warning
HAZARD STATEMENTS H361: Suspected of damaging fertility
PRECAUTIONARY STATEMENTS
[PREVENTION] P201: Obtain special instructions before use
P202: Do not handle until all safety precautions have been read
and understood
P281: Use personal protective equipment as required
[RESPONSE] P308+313: IF exposed or concerned: Get medical advice/attention
[STORAGE] P405: Store locked up
AMT 242 AMT 142 DATASheet _ printed: 01/22/21 page 1 of 6
by | Sep 27, 2025
Able Industrial Products, Inc.
SAF,ETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
TDENTIFICATTON:
RECOMMENDED USE OF
PRODUCT:
SUPPLIERS DETAILS:
EMERGENCY CONTACT:
AMT242-0I GT6t42
Condensation Cure Base
Able Industrial Products
2006 S Baker Ave
Ontario, Calif.91761
1-909-930-1585
Fax 1-909-930-1587
CHEMTREC (24 Hours): 1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
P R ECA U NO NA R Y STA TE M E N TS
IPREVENTTONJ
IRESPONSEJ
[SToRAGEJ
Not Classified
Reproductive Toxicity – Category 2
Not Classified
Warning
H361: Suspected of damaging fertility
P201: Obtain special instructions before use
P202: Do not handle until all safety precautions have been read
and understood
P2B1 : LJse personal protective equipment as required
P30B+313: IF exposed or concerned: Get medical advice/attention
P405: Store locked up
AMr z4z AMT 242 DArA Sheet printed: I2l30l2L page 1 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
[DrsPosALl P501-Dispose of contents/container through a waste management
company authorized by the local government.
3, COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
Octa methylcyclotetrasi loxa ne
Mixture
CAS#
556-67-2
67923-L9-7
<2.5o/o
I-5o/oPolydimethyl( methyl vinyl)siloxane,
hydroxyl terminated
xTitanium dioxide 13463-67-7 0.1 - 1
xThis
product in the physicalstate as sold (liquid paste) should not present a dust hazard, which is the
hazardous form of titanium dioxide, under normal conditions.
4. FIRST AID MEASURES
INGESTION:
SKIN CONTACT:
INHALATION:
EYE CONTACT:
PROTECTION FOR FTRST-
ATDERS:
Rinse mouth. Never give anything by mouth to an unconscious
person. Seek medical attention; Do NOT induce vomiting.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
Remove to fresh air. Oxygen or aftificial respiration if needed. Do
not use mouth-to-mouth method if victim inhaled the substance,
Induce artificial respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory medical device.
Call a physician if symptoms develop or persist,
Immediately flush with COOL water for 15 minutes; Call a
physician if irritation persists.
A rescuer should wear personal protective equipment, such as
rubber gloves and air-tight goggles
5. FIRE-FIGHTING MEASURES
SUTTA B L E EXTIN G UTSHTN G
MEDIA:
SPECIFIC FTRE HAZRDS:
FIREFIGHTER EQUIPMENT:
Foam, carbon dioxide, dry chemical
Fire will form hazardous combustion gases of carbon dioxide
(COz), carbon monoxide (CO), SiOz, and oxides of nitrogen (NO").
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150oC.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
Wear respirator and all protective coverinqs.
6. ACCIDENTAL RELEASE MEASURES
AMr 242 AMT 242 DArA sheet printed: L2l30l2I page 2 of 6
Able Industrial Products, Inc.
SAF'ETY DATA SHEET
PERSONAL PRECATIONT
PROTECTIVE EQ UIPM ENT AN D
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains
Scrape up and disposed of in accordance with appropriate laws
and rcqulations.
7. HANDLING AND STORAGE
HANDLTNG:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes
Keep container tightly closed. Store in a cool, dry place. Keep
awav from oxidizinomaterial. Store locked up
B. EXPOSURE CONTROLSAND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous CAS#
Octamethylcyclotetrasiloxa ne
Polyd imethyl( methylvi nyl)siloxa ne,
hydroxyl terminated
Titanium dioxide
Not established
Not established.
For Respirable Dust (TWA)
TLV: 10mg/m^3 /(ACGIH),
PEL: 15mg/m^3/(OSHA)
None Available
Not required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
556-67-2
67923-19-7
L3463-67-7
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUIPMENT:
R ESPIRATOR Y PROTECTTO N :
HAND PROTECTION
EYE PROTECNON
SKIN AND BODY PROTECTION Protective clothinq if situation reouires
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POTNT:
BOILING POINT R.ANGE:
FLASH POINT:
EVAPORATION RATE:
FLA M MA B r LI TY(so I i d/ g a s) :
EXPLOSION LIMTTS:
UPPER
LOWER
Flowable Paste
No Odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>2050F (Setaflash)
Not Available
Not Available
Not Available
Not Available
AMr 242 AMT 242 DArA sheet printed: I2l30l2I page 3 of 6
Able Industrial Products, Inc
SAF’ETY DATA SHEET
VAPOR PRESSURE:
VAPOR DENSITY:
RELATTVE DENSTTY:
SOLUBILITY:
PA R TTTIO N C O EFFICTE N T: N.
OCTANOL/WATER:
A UTO- I G N ITIO N TEM P E RA TU R E :
DECOMPOSTTTON
TEMPERATURE:
VISCOSITY:
Not Available
All vapors are denser than air
1.1 q/ml
Not soluble in water
Not Available
Not Available
>1500c
30,000 – cS
10. STABILIW AND REACTIVITY
REACTIVITY:
CHEMICAL STABILTW:
HAZARDOUS REACTTONS:
CONDITTONS TO AVOTD:
HAARDOUS DECOMPOSITION
PRODUCTS:
INCOMPATIBTLITY:
Product is designed to react with a catalyst to initiate
vulcanization.
Stable in the absence of contamination
None
Avoid contact with strong acids, alkalis, and oxidizing agents.
Hazardous combustion gases of carbon dioxide(COz), carbon
monoxide(CO), SiOz, and oxides of nitrogen (NO”).
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150oC,
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
Acids, Alkalis, Oxidizinq Aqents
1 1. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY:
sKrN coRRosroNfiRRITATrON:
E YE DA MA G E/I R RITATIO N :
RESPTRATORY OR SKTN
SENSITATTON:
GERM CELL MUTAGENICTW:
CARCTNOGENTCITY:
R EPRO D U CTTVE TOXTCTTY:
Oral- LDso(Rat): >10000m9/kg (calculated from known toxicities)
Not Available
Not Available
Not Available
Not Available
Titanium dioxide is listed by the IARC under its 28 classification. It
is also listed by the ACGIH under its 44 classification. However,
these two hazards are associated with titanium dioxide in its dust
form. As mentioned in Section 3, titanium dioxide in its current
form should not produce a dust hazard.
Octamethylcyclotetrasiloxane is suspected of damaging fertility, A
two year combined chronic/carcinogenicity assay was conducted
on octamethylcyclotetrasiloxane (D4). Fischer-344 rats were
exposed by whole body vapor inhalation 6hrlday, 5 days/week for
up to 103 weeks to 0, 10,30, 150 or 700ppm of D4. A statistically
significant increase in incidence of uterine endometrial cell
hyperplasia and uterine adenomas (benign tumors) were observed
in female rats at 700ppm. Since these effects only occurred at
700ppm, a level that greatly exceeds typical workplace or
consumer exposure, it is unlikely that industrial, commercial or
consumer uses of products containing D4 would result in a
siqnificant risk to humans.
AMr 242 AMT 242 DArA sheet printed: t2l30l2L page 4 of 6
Able Industrial Products, Inc.
SAF’ETY DATA SHEET
STOST- SINGLE EXPOSURE:
STOST- REPEATED EXPOSURE:
ASPIRATION HAZARD:
Not Available
Not Available
Not Available
12. ECOLOGICAL INFORMATION
ECOTOXTCITY:
P E R SISTE N C E / D E G RA DA B I L TTY :
BIOA CC U M U LATIVE POTENTIA L :
MOBILITY IN SOIL:
Do not allow to enter soil, waterways or waste water canal. It is
not allowed to be released into biological sewage treatment
plants. Ecological data is not available,
Not Available
Not Available
Not Available
13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a
chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local
regulations when disposing of the substance,
14. TRANSPORT INFORMATION
UN/NA Number:
DOTSHIPPING NAME:
DOT HAARD CLASS:
IMDG – P,S.N,:
IMDG –
CLASS:
fiMDG – PACKING GROUP:
IMDG – Marine Pollutant:
IATA – P.S.N,:
IATA – CLASS:
IATA
_
PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Requlations, ADR, RID, and the ADN.
15. REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTING REQUIREMEN?’5.’The components of this product are subject to the reporting
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 cFR 355
SARA 304
(40 CFR Table
SARA 313
(40 cFR 372.6s)
4) 302.4
Octa methylcyclotetrasi loxa ne
Polydimethyl(methyl vinyl)siloxane,
hydroxyl terminated
Titanium dioxide
No No No
No
No
No
No
No
No
AMr 242 AMT 242 DArA sheet printed: I2l30l2l page 5 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.S. CERCLA REPORTABLE QUANTITY (RQ): None
SARA 311/312(40 CFR 37O) IIAZARDS;Acute: No, Chronic: Yes, l-ire: No, Pressure: No
CA LIFO R N IA, ( PR O PO SI TIO N 65,f .’ Tita n i u m d ioxide
TSCA INVENTORY STAIUS,’These rrtaterials or all of their contents are lisLed on the Toxic Substances
Control Act (TSCA).
CANADfAN DSL/NDSL INVENTOR L’The components of this product are on the DSL. or NDSL
Inventories.
AUSTRALIAN TNVENTORY OF CHEMICAL SUBSTANCES(AICS) STATUS: The components of this
product are listed on the AICS
KOREAN INVENTORY: The components of this product are listed or exempted.
16.OTHER INFORMATION
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product, No warranty, expressed or implied, is
hereby made.
Date Created/Revised: I2107 I 15 Made By: Daniel Shaw
AMr 242 AMT 242 DArA sheet printed: 1213012I page 6 of 6
