by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AIRWEAVE N7
Medium weight non-woven polyester breather/bleeder
DESCRIPTION
Airweave N7 is a medium weight breather which should be used when Airweave N4 is not sufficient for
airflow or when Airweave N10 is too thick. Non-woven construction provides good conformity.
@ BENEFITS
+ Easy to conform over shaped parts, saving time.
+ Better breather performance, reducing trapped volatiles.
+ Can be supplied slit to width or cut to shape for easier application.
@ TECHNICAL DATA
Fiber type Polyester
Color White
Weight (approx.) 7 oz/yd? (237 g/m?)
Maximum use temperature 400 F (204 C)
Fire retardant N/A
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
60 inches (152 cm) 50 yards (45 m) 1 roll
up to 180 inches (457 cm) 50 yards (45 m) special order
@ NOTES
+ Material can be slit in special widths upon request (1 standard roll as minimum order quantity).
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ A fire retardant version is available, see Airweave N7 FR data sheet.
+ Packaging is clear with blue print.
Last updated : 2019-02-04
Catalog position : Breathers & Bleeders
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the perfomance of his material fo any para ue. The mater is sld “a
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen A
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AIRWEAVE N10
Heavy weight non-woven polyester breather/bleeder
DESCRIPTION
Airweave N10 is used for higher pressure cures. This breather still offers good elongation and cushions any
sharp radius for vacuum bag protection. Non-woven construction provides good conformity.
@ BENEFITS
+ High pressure breather, reducing trapped volatiles in autoclave cures.
+ Can protect vacuum bag from puncture by sharp tooling details.
+ Fire retardant version safeguards parts and equipment.
@ TECHNICAL DATA
Fiber type Polyester
Color White
Weight (approx.) 10 oz/yd? (339 g/m )
Maximum use temperature 400 F (204 C)
Fire retardant N/A
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
60 inches (152 cm) 50 yards (45 m) 1 roll
up to 180 inches (457 cm) 50 yards (45 m) special order
@ NOTES
+ Material can be slit in special widths upon request (1 standard roll as minimum order quantity).
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+A fire retardant version is available, see Airweave N10 FR data sheet.
+ Packaging is clear with blue print.
Last updated : 2019-04-09
Catalog position : Breathers & Bleeders
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the perfomance of his material fo any para ue. The mater is sld “a
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen A
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet AUTO-COUPLE 24 PHT
Thermocouple assembly
lM DESCRIPTION
Auto-Couple 24 PHT is a thermocouple assembly suitable for use up to 800 F (426 C). Auto-Couple 24 PHT uses wire
that has been directly coated with an abrasion and peel resistant polyimide to provide superior insulation at the
intended temperature. Auto-Couple 24 PHT thermocouples are supplied with a ceramic J connector. Auto-Couple 24
PHT is ideal for PEEK, PEKK, PAEK, and polyimide composite processing.
M@ BENEFITS
+ No stripping of fiberglass insulation, no FOD.
+ ASTM and BAC “Special Limits”
+ Outstanding chemical resistance.
@ TECHNICAL DATA
Material type conductors Iron/ Constantan
Material type insulation Polyimide
Colour Brown
Maximum use temperature 800 F (426 C) Continuous
Pn Meets ASTM E230/E230M, Class 1 IEC 60584 and BAC
Specification 5621
SIZES
Auto-Couple 24 PHT 0.050 inch (1.27 mm) 3 – 100 feet (0.9 – 30.5 m)
a WN
we
N J
@ NOTES
+ Minimum order quantity may be required.
Last updated : 2023-06-28
Catalog position : Miscellaneous
ste contin ceo ue nding sarge beyond ot conta itech tration doe et sme pony for the peromnnce fh mae for ry arr. The mates sols Artech inten ne
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AT-200Y
Economical multi-purpose sealant tape
DESCRIPTION
AT-200Y is an economical multi-purpose sealant tape with high tack. It removes easily from metal or composite
tools. Suitable for cure applications up to 400 F (204 C).
@ BENEFITS
+ Economical vacuum tape reduces the cost of vacuum bagging.
+ Multi-purpose tape can be used on metal and composite tooling.
+ Easy clean up reduces cost of tool cleaning.
@ TECHNICAL DATA
Color Yellow
Base material Synthetic rubber
Maximum use temperature 400 F (204 C)
Shelf life 12 months from date of manufacture
Pen Tape must be stored flat in original packaging at 72 F (22 C)
Storage conditions Do not refrigerate
@ SIZES
1/8 inch x 1/2 inch x 25 feet
@ mmx 12 mmx 7.62 m) GrO cells Bares
– SY
@ NOTES
+ For clean removal, it is recommended to strip the tape from the mold surface once it has cooled down to
room temperature.
+ Other widths available on special order, please contact Airtech for more information. Minimums will apply.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2023-06-02
Catalog position : Vacuum bag sealant tapes A
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
_
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AT-200Y
Economical multi-purpose sealant tape
DESCRIPTION
AT-200Y is an economical multi-purpose sealant tape with high tack. It removes easily from metal or composite
tools. Suitable for cure applications up to 400 F (204 C).
@ BENEFITS
+ Economical vacuum tape reduces the cost of vacuum bagging.
+ Multi-purpose tape can be used on metal and composite tooling.
+ Easy clean up reduces cost of tool cleaning.
@ TECHNICAL DATA
Color Yellow
Base material Synthetic rubber
Maximum use temperature 400 F (204 C)
Shelf life 12 months from date of manufacture
Pen Tape must be stored flat in original packaging at 72 F (22 C)
Storage conditions Do not refrigerate
@ SIZES
1/8 inch x 1/2 inch x 25 feet
@ mmx 12 mmx 7.62 m) GrO cells Bares
– SY
@ NOTES
+ For clean removal, it is recommended to strip the tape from the mold surface once it has cooled down to
room temperature.
+ Other widths available on special order, please contact Airtech for more information. Minimums will apply.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2023-06-02
Catalog position : Vacuum bag sealant tapes A
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
_
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet AQD 500TF
Two piece quick disconnect
lM DESCRIPTION
The AQD 500TF quick disconnect couplings are made of high carbon steel that have been plated to halt oxidation.
The couplings have internal valves so when disconnected the airflow is shut off in both plug and socket. This means
your vacuum bag holds vacuum even after the vacuum hose has been disconnected. The AQD 500TF are rugged
dependable disconnects that can be installed in minutes when used with Airtech Vac Valves. The AQD 500TF comes
with a threaded female fitting designed to receive our Airflow autoclave and oven hoses. Use our AQD 500BF (barbed
fitting) when attaching to rubber vacuum lines.
@ BENEFITS
+ Standard design compatible with Vac Valves and Hoses.
+ Quick disconnect feature for fast loading/unloading of ovens and autoclaves.
+ Shut off valves prevent vacuum loss after disconnect.
@ TECHNICAL DATA
Material type Carbon steel
Material type of O ring seals FKM elastomer
Connection to hose Threaded
Screw thread 1/4 inch female NPT
Coupling size 1/4 inch
Service temperature 260 C (500 F)
M@ NOTES
+ AQD 500TF on the autoclave wall that are not being used for hose connections should be protected
with BC500 Blanking caps to avoid vacuum leakage. Otherwise autoclave pressure will compress the
spring seal and open the valve resulting in lost vacuum and pressure.
+ Sockets and plugs may be sold separately.
+ Other thread sizes available upon request.
Last updated : 2024-09-30
Catalog position : Vacuum valves and hoses
ste conditions creat ue nding sarge beyond ot cota itech trator does ese pony for the pevonnnce fhe for ry arr. The mates sols Artech inten ne
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AQD 500TF
Two piece quick disconnect
DESCRIPTION
The AQD S5O0TF quick disconnect couplings are made of high carbon steel that have been plated to halt
oxidation. The couplings have internal valves so when disconnected the airflow is shut off in both plug and
socket. This means your vacuum bag holds vacuum even after the vacuum hose has been disconnected. The
AQD SOOTF are rugged dependable disconnects that can be installed in minutes when used with Airtech Vac
Valves. The AQD SOOTF comes with a threaded female fitting designed to receive our Airflow autoclave and
oven hoses. Use our AQD 500BF (barbed fitting) when attaching to rubber vacuum lines.
@ BENEFITS
+ Standard design compatible with Vac Valves and Hoses.
+ Quick disconnect feature for fast loading/unloading of ovens and autoclaves.
+ Shut off valves prevent vacuum loss after disconnect.
@ TECHNICAL DATA
Material type Carbon steel
Material type of O ring seals FKM elastomer
Connection to hose Threaded
Screw thread 1/4 inch female NPT
Coupling size 1/4 inch
Service temperature 500 F (260 C)
sf Sos
)
@ NOTES
+ AQD SOOTF on the autoclave wall that are not being used for hose connections should be protected
with BC500 Blanking caps to avoid vacuum leakage. Otherwise autoclave pressure will compress the
spring seal and open the valve resulting in lost vacuum and pressure.
+ Sockets and plugs may be sold separately.
+ Other thread sizes available upon request.
Last updated : 2016-02-19
Catalog position : Vacuum valves and hoses
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. does not ese ay regan fo the performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AIRTAC 2C
California compliant spray contact adhesive for temporary bonding
DESCRIPTION
Airtac 2C is a mist rubber based adhesive intended for use in layered composites assemblies. Airtac 2C has
aggressive tack and the mist spray pattern ensures good coverage.
Airtac 2C holds fabrics and core materials in place prior to vacuum bagging for infusion.
@ BENEFITS
+ Excellent tack holds dry materials for faster vacuum bagging.
+ More accurate material placement for infusion setups and better quality laminates.
+ Environmentally compliant.
@ ~ TECHNICAL DATA
Characteristics Non-CFC and California Compliant
Color Cream
Shelf life 12 months from date of shipment when stored between 59 – 95 F
voc <30%
@ SIZES
12 cans per case 600 ml per can
@ APPLICATION
+ Shake well before use.
+ Surfaces should dry and clean, dirt and grease free before application.- Do not wet surface.
+ Spray adhesive from 6-8 inches away onto the surface.
+ Allow to dry for approximately 10 seconds until tacky and then press fabric or core material in position.
+ To prevent the spray nozzle from blocking, at the end of each period of use, turn the can upside down
and press the nozzle until the spray is clear of adhesive.
@ NOTES
+ Consult SDS prior to use.
+ Airtac 2C will typically dry within two minutes under normal conditions. High humidity and low temperature
will slow the drying time.
Last updated : 2023-08-08
Catalog position : Resin infusion products
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sme any espns fe the perfomance of hs material fo any parca ue. The mater sold"
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet AIRPAD
Uncured non-silicone tooling rubber
lM DESCRIPTION
Airpad is an uncured, non-silicone rubber for manufacture of pressure caul sheets, flexible mandrels, and rubber
tooling. Airpad caul sheets improve part quality on the vacuum bag side of the part.
The Airpad pressure intensifier provides uniform pressure distribution during autoclave processing. Airpad will take
high temperature similar to silicone rubbers but will not cause silicone contamination. Airpad is dimensionally stable
when reinforced with Airtech Toolmaster Prepregs, which bond well and do not generate volatiles that could also
cause delamination.
@ BENEFITS
+ Reduce scrap with improved part quality due to better thickness control and corner consolidation.
+ Reduce rework by eliminating surface wrinkles, voids, and porosity.
+ Avoid part distortion due to uneven laminate consolidation during cure.
M@ TECHNICAL DATA
Properties listed are typical for the fully cured material Test method
Material type Non-silicone rubber
Colour Black
Maximum use temperature 204 C (400 F)
Elongation at break 400 % ASTM D412
Hardness 70 Shore A ASTM D2240
Tensile strength 1300 psi (8.96 MPa) ASTM D412
24 months from date of shipment
Shelf life when stored
in original packaging at 72 F (22 C)
Storage conditions Do not freeze
@ SIZES
Packaging Type
0.0625 inch (1.59 mm) 54 inches (137 cm) 50 feet (15.24 m) roll
M APPLICATION
Molding Guidelines:
+ Mold Airpad off a part, dummy part, or mold which is stable at high temperature and capable of high pressure.
+ Tack is temperature dependent and can be controlled with additional heat to assure adhesion to vertical
surfaces, sharp corners, and complex shapes.
+ Airpad is not self releasing and must be covered with a release material, such as Airtech A4000BOS bondable
one side release film during the layup process.
+ Teflease, Tooltec , Wrightlease, and Toolwright can also be applied to cured Airpad, consult Airpad User
Manual for detailed instructions.
Recommended Cure:
+ Apply full vacuum throughout cure cycle and pressurize autoclave to 100 psi (7 bar), minimum recommended
pressure is 45 psi (3 bar).
+ Heat to 350 F (176 C) and hold for 2 hours, then cool to room temperature before removing vacuum and
demolding from master mold.
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a demo video of Airpad in the “Media Center” on our website.
Last updated : 2024-12-09
Catalog position : Rubber
ste conditions creo ue nding sarge beyond ou conta itech trator oe et asume eponly for the peronnance of hme for ry arc. The mates sols Artech intetionl n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet AIRPAD HTX
A non-silicone tooling rubber for caul sheets and flexible tooling
lM DESCRIPTION
Airpad HTX is an uncured, non-silicone rubber for manufacture of pressure caul sheets, flexible mandrels, and rubber
tooling. Airpad HTX has been developed for longer service life and can be used with liquid release agents. Airpad HTX
caul sheets improved part quality on the vacuum bag side of the part.
Airpad HTX pressure intensifier provides uniform pressure distribution during autoclave processing. Airpad HTX will
take high temperature similar to silicone rubbers but will not cause silicone contamination. Airpad HTX can be
reinforced with Airtech Toolmaster Prepregs, which bond well and do not generate volatiles that could also cause
delamination.
M@ BENEFITS
+ Adheres well to A4000B0S and has a high temperature resistance for longer lasting caul sheet.
+ Airpad HTX bonds to itself aggressively, making it easier to repair.
+ Liquid release agents can be applied to cured Aipad HTX allowing for more complex intensifiers.
@ TECHNICAL DATA
Properties listed are typical for the fully cured material
Test method
Material type Uncured non-silicone rubber
Colour Gray
Maximum use temperature 204 C (400 F)
Elongation at break 550% ASTM D412
Hardness 70 Shore A ASTM D2240
Tensile strength 1900 psi (13.1 MPa) ASTM D412
P 24 months from date of shipment
Shelf life when stored in the original packaging
Storage conditions Do not freeze
lM SIZES
Packaging Type
0.0625 inch (1.59 mm) 54 inches (137 cm) 50 feet (15.24 m) roll
M@ APPLICATION
Molding Guidelines:
+ Mold Airpad HTX off a part, dummy part or mold which is stable at high temperature and capable
of high pressure.
+ Airpad HTX has low tack, a light spray of Airtac 2 or use of a heat gun will aid layup onto vertical surfaces.
+ Airpad HTX will have longer service life if covered with a release film such as Airtech A4000BOS bondable
one side release film 0.002 inches (50 um) thick, during the layup process.
+ Liquid release agents should be tested prior to use on part manufacture. Consult Airpad HTX User
Manual for detailed instructions.
Recommended Cure:
+ Apply full vacuum throughout cure cycle and pressurize autoclave to 100 psi (7 bar), minimum
recommended pressure is 60 psi (4 bar).
+ Heat to 350 F (176 C) and hold for 1 hour, then cool to room temperature before removing
vacuum and demolding from master mold.
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2024-07-01
Catalog position : Rubber
ste conditions creo ue nding sarge beyond ou conta itech trator oe et asume eponly for the peronnance of hme for ry arc. The mates sols Artech intetionl n
