by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet COMBO-TECH
Combination materials for vacuum bagging
DESCRIPTION
Combo-Tech is our expanded product line that bonds various vacuum bagging materials together to forma
better overall product and reduce touch labor , saving companies hours of labor expense while increasing
productivity.
Any combination of peel ply, release film, breather, and flow mesh can be bonded together with a non-silicone
adhesive and supplied in a variety of widths.
@ BENEFITS
+ Multi-function laminate and save time with less materials to cut & apply, reducing cycle time.
+ Improve part quality with simpler process & improved surface finish.
+ Reduce cost with less rework and reduced Touch Labor.
@ HOWTO COMBO-TECH
STEP 1: Choose your Materials
Include details for each such as, product type, weight, thickness, color, perforation, etc.
STEP 2: Choose your Combo-Tech
+ Roll up orientation (which material is on outside, middle and inside)
+ Edge style (untrimmed, trimmed, staggered)
+ Roll width and preferred length (these will be based on standard sizes of individual rolls to minimize waste)
STEP 3: Contact Airtech
Submit your request and we will provide a quote with lead time and minimum order quantity that will apply.
_
me,
_
= ne / /
MV biieled, fof.f
4,
r eS ?
by | Sep 27, 2025
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20190404 DATED: September 19, 2022
Page 1 of 3
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
TECHNICAL DATA SHEET
PRODUCT INFORMATION
PRODUCT: Flexible Viny
PRODUCT ID: CFIT101132
EMBOSS: Orange Matte Vinyl
GAUGE: .006
COLOR: Orange
HAND: 44 PHR
COMPLIANCE
CALIFORNIA PROP. 65 REGULATIONS LISTED ON NOV. 23, 2018
REACH 197 SVHC LISTED ON JANUARY 15, 2019
ROHS – 2011/65/EU ANNEX II AND AMENDING DIRECTIVE (EU) 2015/863
PHTHALATE FREE FORMULATION DOES NOT CONTAIN DEHP, DBP, BBP, DINP, DIDP,
OR DNOP
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20190404 DATED: September 19, 2022
Page 2 of 3
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
PHYSICAL PROPERTIES
TEST
CHARACTERISTICS
UNIT of
MEASURE
TEST METHOD RESULTS
1. Gauge Tolerance % ASTIM D-1593 10%
2. Width Inch ASTM D-1593 72
3. Thickness (GA) After
Embossing
ASTM D-374C 6.0 GA
4. Specific Gravity 1.315 0.03
5. Tensile Strength kgf / cm
2
ASTM D-882
MD 200
CD 180
6. Elongation % ASTM D-882
MD 200
CD 200
7. Tear Strength kgf / cm
2
ASTM D-882
MD 50
CD 40
8. Shrinkage % %
ASTM D-1204
(100 C * 30 min * oven)
MD -5
CD 3
9. Cold Crack F / ASTM D-1790 32 / 0
10. DEHP DBP BBP DINP
DPENP DNHP DCHP
DIBP
CPSC-CH-C1001-09.3 PASS
11. DIDP DNOP CPSC-CH-C1001-09.3 PASS
12. Lead (Pb) 100
mg/kg
(a) CPSC-CH-E1002-08.1
(b) RoHS IEC62321-2008 (ICP-
AES)
PASS
13. Cadmium (Cd) RoHS IEC62321-2008 (ICP-AES) PASS
14. Mercury (Hg) RoHS IEC62321-2008 (ICP-AES) PASS
15. Hexavalent
Chromium (Cr+6)
RoHS IEC62321-2008 (ICP-AES) PASS
16. Antimony (Sb) RoHS IEC62321-2008 (ICP-AES) PASS
17. Arsenic (As) RoHS IEC62321-2008 (ICP-AES) PASS
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20190404 DATED: September 19, 2022
Page 3 of 3
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
18. Barium (Ba)
500mg/kg
ASTM F963-11 4.3.5.2(1) PASS
19. Selneium (Se)
500mg/kg
ASTM F963-11 4.3.5.2(1) PASS
20. Bisphenol A
500mg/kg
Substance not used
21. Storage Conditions Rel. Humidity 40% – 60%
22. Shelf Life Ideal Conditions 12 Months
NOTES:
None.
by | Sep 27, 2025
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20180901 DATED: September 20, 2022
Page 1 of 2
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
TECHNICAL DATA SHEET
PRODUCT INFORMATION
PRODUCT: Flexible Vinyl
PRODUCT ID: CFIT100150
EMBOSS: Orange Matte Vinyl
GAUGE: .006
COLOR: Orange
HAND: 44 PHR
WARNING
WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING DIISONONYL PHTHALATE
(DINP), WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, AND DI(2-ETHYLHEXYL) PHTHALATE
(DEHP), WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. FOR MORE INFORMATION GO TO WWW.P65WARNINGS.CA.GOV.
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20180901 DATED: September 20, 2022
Page 2 of 2
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
PHYSICAL PROPERTIES
TEST
CHARACTERISTICS
UNIT of
MEASURE
TEST METHOD RESULTS
1. Gauge Tolerance % ASTIM D-1593 10%
2. Width Inch ASTM D-1593 115
3. Thickness (GA) After
Embossing
ASTM D-374C 10.82 GA
4. Specific Gravity 1.315 0.03
5. Tensile Strength kgf / cm
2
ASTM D-882
MD 210
CD 200
6. Elongation % ASTM D-882
MD 200
CD 220
7. Tear Strength kgf / cm
2
ASTM D-882
MD 60
CD 50
8. Shrinkage % %
ASTM D-1204
(100 C * 30 min * oven)
MD 60
CD 50
9. Cold Crack F / ASTM D-1790 32 / 0
10. Storage Conditions Rel. Humidity 40% – 60%
11. Shelf Life Ideal Conditions 12 Months
NOTES:
None.
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet BLEEDER LEASE G
Coated polyester peel ply
lM DESCRIPTION
Bleeder Lease G peel ply is a high temperature fabric coated with a silicone release agent. It provides superior release
to plain peel plies because the coating prevents the fabric from bonding to the laminate while producing a textured
surface. It will provide easy release from most prepregs and resin systems. All coated peel plies have the potential to
transfer. Bleeder Lease G is a tightly woven coated polyester material that will release from the more difficult resin
systems. The polyester adds strength, making removal easier.
M@ BENEFITS
+ Release coating reduces the effort required to remove peel ply from laminate.
+ Strength of tighter weave aids removal after cure in most demanding applications.
+ Polyester fiber provides additional strength and resistance to aggressive resins such as phenolics.
@ TECHNICAL DATA
Maximum use temperature 204 C (400 F)
Fiber type Polyester
. 472 x 252 ends/ dm x picks/ dm
Fabric construction: warp x fill (120 x 64 ends/in x picks/in)
Weight 83 g/m? (2.45 oz/yd )
Thickness 0.127 mm (0.005 inch)
Colour Green
Coating type Silicone
Recommended storage temperature is 5 C to 40 C (41 F
Storage to 104 F). Store indoors in original packaging, do not
stack rolls on end.
lM SIZES
Packaging
152 cm (60 inches) 91 m (100 yards) Troll
Mi SUSTAINABILITY
recycled wy Packaging
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
Last updated : 2025-04-05
Catalog position : Release fabrics & Peel plies
ste contin creo ue nding sarge beyond ot conta itech trator does ese pony for the peromnance fhe for ry parr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet BLEEDER LEASE G
Coated polyester peel ply
lM DESCRIPTION
Bleeder Lease G peel ply is a high temperature fabric coated with a silicone release agent. It provides superior release
to plain peel plies because the coating prevents the fabric from bonding to the laminate while producing a textured
surface. It will provide easy release from most prepregs and resin systems. All coated peel plies have the potential to
transfer. Bleeder Lease G is a tightly woven coated polyester material that will release from the more difficult resin
systems. The polyester adds strength, making removal easier.
M@ BENEFITS
+ Release coating reduces the effort required to remove peel ply from laminate.
+ Strength of tighter weave aids removal after cure in most demanding applications.
+ Polyester fiber provides additional strength and resistance to aggressive resins such as phenolics.
@ TECHNICAL DATA
Maximum use temperature 204 C (400 F)
Fiber type Polyester
. 472 x 252 ends/ dm x picks/ dm
Fabric construction: warp x fill (120 x 64 ends/in x picks/in)
Weight 83 g/m? (2.45 oz/yd )
Thickness 0.127 mm (0.005 inch)
Colour Green
Coating type Silicone
Recommended storage temperature is 5 C to 40 C (41 F
Storage to 104 F). Store indoors in original packaging, do not
stack rolls on end.
lM SIZES
Packaging
152 cm (60 inches) 91 m (100 yards) Troll
Mi SUSTAINABILITY
recycled wy Packaging
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
Last updated : 2025-04-05
Catalog position : Release fabrics & Peel plies
ste contin creo ue nding sarge beyond ot conta itech trator does ese pony for the peromnance fhe for ry parr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet BLEEDER LEASE B
Coated nylon peel ply
DESCRIPTION
Bleeder Lease B peel ply is a high temperature fabric coated with a silicone release agent. It provides superior
release to plain peel plies because the coating prevents the fabric from bonding to the laminate while
producing a textured surface. It will provide easy release from most prepregs and resin systems. All coated peel
plies have the potential to transfer. Bleeder Lease B is a tightly woven, coated nylon peel ply that releases well
from most resin systems. It is an excellent choice for many resin infusion projects.
@ BENEFITS
+ Release coating reduces the effort required to remove peel ply from laminate.
+ Peel plies strip off of cures laminates leaving a textured surface, reducing time spent hand finishing.
+ Highly drapable weave style can be applied over multiple curved surfaces more easily.
@ TECHNICAL DATA
Maximum use temperature 450 F (232 C)
Fiber type Nylon
Fabric construction: warp x fill 104 x 87 ends/in x picks/in (409 x 342 ends/ dm x picks/ dm)
Weight 1.83 oz/yd? (62 g/m )
Thickness 0.0045 inch (0.114 mm)
Color Green
Coating type Silicone
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Width
60 inches (152 cm) 100 yards (91 m) 1 roll
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
+ Certain phenolic resins will adhere to this product. Airtech recommends testing prior to use.
Last updated : 2020-12-07
Catalog position : Release fabrics / Peel plies
-Asthecondton or methods fuse, including storage, ae beyond our control Altach tration nc does ot sme any espns fe the perfomance of his material fo any parr ue. The mater sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a loam Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet PREMIUM BLANKING CAP 500
Blocks unused vacuum connections
DESCRIPTION
Use the Blanking Cap 500 on unused quick disconnect plugs to avoid vacuum loss from your system. It has a
domed end which fits in the palm of the hand making it easier to push into place on plugs.
@ BENEFITS
+ Cap unused connections in the autoclave to stop air pressure leakage into the vacuum system.
+ Protect vacuum valve connections during tool transit.
+ Prevent vacuum valve leakage during vacuum drop tests.
@ TECHNICAL DATA
Construction Single piece solid body
Material type Stainless steel
Material type of O ring seals FKM elastomer
Service temperature 475 F (246 C)
Coupling style Hansen ISO-B
Coupling size 1/4 inch
Max autoclave pressure 145 psi (10 bar)
Last updated : 2016-02-03
Catalog position : Vacuum valves and hoses A
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. does not ese ay regan fo the performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet BIG BLUE L-100
Inexpensive, low temperature multi-layer bagging film
DESCRIPTION
Big Blue L-100 vacuum bag film is a multi-layer film for applications where a wide film is required. It is suitable
for resin infusion and wet lay-up where the cure temperature does not exceed 250 F (121 C).
@ BENEFITS
+ Super wide films save time spent seaming film when bagging large parts.
+ Wider films reduce risk of scrap parts due to leaky film seams.
+ Inexpensive film reduces vacuum bagging costs.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 350% ASTM D 882
Tensile strength 3100 psi (21 MPa) ASTM D 882
Maximum use temperature 250 F (121 C)
Flammability (self extinguishing) No ATP-5034,
Materials to avoid Phenolic resins/Strong oxidizers
Color Blue
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.003 inch (75 um) up to 52.5 feet (16 m) varies
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
+ Maximum width of 52.5 feet (16 m) is available special order, subject to a minimum order quantity.
*CF=Centerfold SWF=Single DWF=Double MWF=Multiple
W-Fold W-Fold W-Fold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the “Media Center” on our website.
+ Film has low slip characteristics to reduce risk of operator slips when moving across very large vacuum bags.
Last updated : 2020-10-15
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet BIG BLUE L-100
Inexpensive, low temperature multi-layer bagging film
DESCRIPTION
Big Blue L-100 vacuum bag film is a multi-layer film for applications where a wide film is required. It is suitable
for resin infusion and wet lay-up where the cure temperature does not exceed 250 F (121 C).
@ BENEFITS
+ Super wide films save time spent seaming film when bagging large parts.
+ Wider films reduce risk of scrap parts due to leaky film seams.
+ Inexpensive film reduces vacuum bagging costs.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 350% ASTM D 882
Tensile strength 3100 psi (21 MPa) ASTM D 882
Maximum use temperature 250 F (121 C)
Flammability (self extinguishing) No ATP-5034,
Materials to avoid Phenolic resins/Strong oxidizers
Color Blue
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.003 inch (75 um) up to 52.5 feet (16 m) varies
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
+ Maximum width of 52.5 feet (16 m) is available special order, subject to a minimum order quantity.
*CF=Centerfold SWF=Single DWF=Double MWF=Multiple
W-Fold W-Fold W-Fold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the “Media Center” on our website.
+ Film has low slip characteristics to reduce risk of operator slips when moving across very large vacuum bags.
Last updated : 2020-10-15
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet BIG BLUE L-100
Inexpensive, low temperature multi-layer bagging film
DESCRIPTION
Big Blue L-100 vacuum bag film is a multi-layer film for applications where a wide film is required. It is suitable
for resin infusion and wet lay-up where the cure temperature does not exceed 250 F (121 C).
@ BENEFITS
+ Super wide films save time spent seaming film when bagging large parts.
+ Wider films reduce risk of scrap parts due to leaky film seams.
+ Inexpensive film reduces vacuum bagging costs.
@ TECHNICAL DATA
Test method
Material type Polyolefin, multi-layer
Elongation at break 350% ASTM D 882
Tensile strength 3100 psi (21 MPa) ASTM D 882
Maximum use temperature 250 F (121 C)
Flammability (self extinguishing) No ATP-5034,
Materials to avoid Phenolic resins/Strong oxidizers
Color Blue
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.003 inch (75 um) up to 52.5 feet (16 m) varies
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
+ Maximum width of 52.5 feet (16 m) is available special order, subject to a minimum order quantity.
*CF=Centerfold SWF=Single DWF=Double MWF=Multiple
W-Fold W-Fold W-Fold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the “Media Center” on our website.
+ Film has low slip characteristics to reduce risk of operator slips when moving across very large vacuum bags.
Last updated : 2020-10-15
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
