5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet BLEEDER LEASE G
Coated polyester peel ply
lM DESCRIPTION
Bleeder Lease G peel ply is a high temperature fabric coated with a silicone release agent. It provides superior release
to plain peel plies because the coating prevents the fabric from bonding to the laminate while producing a textured
surface. It will provide easy release from most prepregs and resin systems. All coated peel plies have the potential to
transfer. Bleeder Lease G is a tightly woven coated polyester material that will release from the more difficult resin
systems. The polyester adds strength, making removal easier.
M@ BENEFITS
+ Release coating reduces the effort required to remove peel ply from laminate.
+ Strength of tighter weave aids removal after cure in most demanding applications.
+ Polyester fiber provides additional strength and resistance to aggressive resins such as phenolics.
@ TECHNICAL DATA
Maximum use temperature 204 C (400 F)
Fiber type Polyester
. 472 x 252 ends/ dm x picks/ dm
Fabric construction: warp x fill (120 x 64 ends/in x picks/in)
Weight 83 g/m? (2.45 oz/yd )
Thickness 0.127 mm (0.005 inch)
Colour Green
Coating type Silicone
Recommended storage temperature is 5 C to 40 C (41 F
Storage to 104 F). Store indoors in original packaging, do not
stack rolls on end.
lM SIZES
Packaging
152 cm (60 inches) 91 m (100 yards) Troll
Mi SUSTAINABILITY
recycled wy Packaging
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
Last updated : 2025-04-05
Catalog position : Release fabrics & Peel plies
ste contin creo ue nding sarge beyond ot conta itech trator does ese pony for the peromnance fhe for ry parr. The mates sols Artech intetonl n