by | Sep 27, 2025
SAFETY DATA SHEET1. IdentificationPR PTFE coated Fiberglass Release FabricProduct identifierOther means of identification8000608Product code200TFNP * 200TFP * 200TFP-1 * 210TFNP * FF025OW * FF030OW * FF03A * FF03AP *FF03PM * FF05A * FF05AP * FF05PM * FF06AAP * FF06AP * FF10A * FF10AP * FF10PMSynonymsRelease FabricRecommended useNone known.Recommended restrictionsManufacturer/Importer/Supplier/Distributor informationManufacturerAerovac LLCCompany Name955-10 National Parkway, Schaumburg, IL 60173-5161, United States+1-847-437-0200 (International)Aerovac Mondovi S.r.LVia Vigevano 1, Mondov , CN 12084, Italy+39 (0) 174 566200Aerovac Toulouse SAS1 rue de la Sausse, Saint-Jean, 31240, France+33 (0) 5 61 378989Aerovac Keighley Ltd500 Bradford Road, Sandbeds, Keighley, BD20 5 NG, United Kingdom+44 (0) 1274 550500hse@compositesone.comE-mailCHEMTRECEmergency TelephoneUS: 1-800-424-9300Europe: +44 20 3885 0382South America: +55 11 4349 1359International: +1-703-527-38872. Hazard(s) identificationNot a hazardous product according to Globally Harmonized System (GHS)3. Composition/information on ingredientsNot applicable, this product is an article.4. First-aid measuresMove to fresh air. Call a physician if symptoms develop or persist.InhalationWash off with soap and water. Get medical attention if irritation develops and persists.Skin contactRinse with water. Get medical attention if irritation develops and persists.Eye contactRinse mouth. Get medical attention if symptoms occur.IngestionDirect contact with eyes may cause temporary irritation.Most importantsymptoms/effects, acute anddelayedTreat symptomatically.Indication of immediatemedical attention and specialtreatment needed1 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
Ensure that medical personnel are aware of the material(s) involved, and take precautions toprotect themselves.General information5. Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing mediaDo not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing mediaDuring fire, gases hazardous to health may be formed.Specific hazards arising fromthe chemicalSelf-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipmentand precautions for firefightersUse water spray to cool unopened containers.Fire fightingequipment/instructionsUse standard firefighting procedures and consider the hazards of other involved materials.Specific methodsNo unusual fire or explosion hazards noted.General fire hazards6. Accidental release measuresKeep unnecessary personnel away. For personal protection, see section 8 of the SDS.Personal precautions,protective equipment andemergency proceduresStop the flow of material, if this is without risk. Following product recovery, flush area with water.For waste disposal, see section 13 of the SDS.Methods and materials forcontainment and cleaning upAvoid discharge into drains, water courses or onto the ground.Environmental precautions7. Handling and storageObserve good industrial hygiene practices.Precautions for safe handlingStore in tightly closed container. Store away from incompatible materials (see Section 10 of theSDS).Conditions for safe storage,including any incompatibilities8. Exposure controls/personal protectionThis substance has no PEL, TLV, or other recommended exposure limit.Occupational exposure limitsNo biological exposure limits noted for the ingredient(s).Biological limit valuesGood general ventilation should be used. Ventilation rates should be matched to conditions. Ifapplicable, use process enclosures, local exhaust ventilation, or other engineering controls tomaintain airborne levels below recommended exposure limits. If exposure limits have not beenestablished, maintain airborne levels to an acceptable level.Appropriate engineeringcontrolsIndividual protection measures, such as personal protective equipmentWear safety glasses with side shields (or goggles).Eye/face protectionSkin protectionWear appropriate chemical resistant gloves.Hand protectionWear suitable protective clothing.OtherIn case of insufficient ventilation, wear suitable respiratory equipment.Respiratory protectionWear appropriate thermal protective clothing, when necessary.Thermal hazardsAlways observe good personal hygiene measures, such as washing after handling the materialand before eating, drinking, and/or smoking. Routinely wash work clothing and protectiveequipment to remove contaminants.General hygieneconsiderations9. Physical and chemical properties AppearanceSolid.Physical stateSolid.FormNot available.ColorNot available.OdorOdor thresholdNot available.pHNot available.Melting point/freezing pointNot available.Initial boiling point and boilingrangeNot available.Flash pointNot available.2 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
Evaporation rateNot available.Not available.Flammability (solid, gas)Upper/lower flammability or explosive limitsExplosive limit – lower (%)Not available.Explosive limit – upper (%)Not available.Vapor pressureNot available.Vapor densityNot available.Relative densityNot available.Solubility(ies)Solubility (water)Not available.Partition coefficient(n-octanol/water)Not available.Auto-ignition temperatureNot available.Decomposition temperatureNot available.ViscosityNot available.Other informationNot explosive.Explosive propertiesNot oxidizing.Oxidizing properties10. Stability and reactivityThe product is stable and non-reactive under normal conditions of use, storage and transport.ReactivityMaterial is stable under normal conditions.Chemical stabilityNo dangerous reaction known under conditions of normal use.Possibility of hazardousreactionsContact with incompatible materials.Conditions to avoidStrong oxidizing agents.Incompatible materialsNo hazardous decomposition products are known.Hazardous decompositionproducts11. Toxicological informationInformation on likely routes of exposureInhalationNo adverse effects due to inhalation are expected.Skin contactNo adverse effects due to skin contact are expected.Eye contactDirect contact with eyes may cause temporary irritation.IngestionExpected to be a low ingestion hazard.Symptoms related to thephysical, chemical andtoxicological characteristicsDirect contact with eyes may cause temporary irritation.Information on toxicological effectsAcute toxicityNot known.Prolonged skin contact may cause temporary irritation.Skin corrosion/irritationDirect contact with eyes may cause temporary irritation.Serious eye damage/eyeirritationRespiratory or skin sensitizationRespiratory sensitizationNot a respiratory sensitizer.This product is not expected to cause skin sensitization.Skin sensitizationNo data available to indicate product or any components present at greater than 0.1% aremutagenic or genotoxic.Germ cell mutagenicityCarcinogenicityNot classifiable as to carcinogenicity to humans.IARC Monographs. Overall Evaluation of CarcinogenicityNot listed.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.3 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
US. National Toxicology Program (NTP) Report on CarcinogensNot listed.This product is not expected to cause reproductive or developmental effects.Reproductive toxicitySpecific target organ toxicity -single exposureNot classified.Specific target organ toxicity -repeated exposureNot classified.Aspiration hazardNot an aspiration hazard.12. Ecological informationThe product is not classified as environmentally hazardous. However, this does not exclude thepossibility that large or frequent spills can have a harmful or damaging effect on the environment.EcotoxicityNo data is available on the degradability of this substance. Persistence and degradabilityNo data available.Bioaccumulative potentialNo data available.Mobility in soilOther adverse effectsNo other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site.Disposal instructionsDispose in accordance with all applicable regulations.Local disposal regulationsThe waste code should be assigned in discussion between the user, the producer and the wastedisposal company.Hazardous waste codeDispose of in accordance with local regulations. Empty containers or liners may retain someproduct residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).Waste from residues / unusedproductsSince emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal.Contaminated packaging14. Transport informationDOTNot regulated as dangerous goods.IATANot regulated as dangerous goods.IMDGNot regulated as dangerous goods.Not applicable.Transport in bulk according toAnnex II of MARPOL 73/78 andthe IBC Code15. Regulatory informationThis product is not known to be a “Hazardous Chemical” as defined by the OSHA HazardCommunication Standard, 29 CFR 1910.1200.US federal regulationsToxic Substances Control Act (TSCA)This substance is not on the TSCA 8(b) inventory or is designated inactive .TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Not listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.SARA 302 Extremely hazardous substanceSuperfund Amendments and Reauthorization Act of 1986 (SARA)Not listed.No (Exempt)SARA 311/312 Hazardouschemical4 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
SARA 313 (TRI reporting)Not regulated.Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Not regulated.Not regulated.Safe Drinking Water Act(SDWA)US state regulationsCalifornia Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This materialis not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Formore information go to www.P65Warnings.ca.gov.International InventoriesCountry(s) or regionInventory nameOn inventory (yes/no)*NoAustraliaAustralian Inventory of Industrial Chemicals (AICIS)NoCanadaDomestic Substances List (DSL)NoCanadaNon-Domestic Substances List (NDSL)NoChinaInventory of Existing Chemical Substances in China (IECSC)NoEuropeEuropean Inventory of Existing Commercial ChemicalSubstances (EINECS)NoEuropeEuropean List of Notified Chemical Substances (ELINCS)NoJapanInventory of Existing and New Chemical Substances (ENCS)NoKoreaExisting Chemicals List (ECL)NoNew ZealandNew Zealand InventoryNoPhilippinesPhilippine Inventory of Chemicals and Chemical Substances(PICCS)NoTaiwanTaiwan Chemical Substance Inventory (TCSI)NoUnited States & Puerto RicoToxic Substances Control Act (TSCA) Inventory*A “Yes” indicates that all components of this product comply with the inventory requirements administered by the governing country(s)A “No” indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).16. Other information, including date of preparation or last revision06-15-2023Issue date08-23-2023Revision dateVersion #02Health: 0Flammability: 0Instability: 0NFPA ratingsNFPA ratings 0005 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
Aerovac LLC cannot anticipate all conditions under which this information and its product, or theproducts of other manufacturers in combination with its product, may be used. It is the user sresponsibility to ensure safe conditions for handling, storage and disposal of the product, and toassume liability for loss, injury, damage or expense due to improper use. The information in thesheet was written based on the best knowledge and experience currently available. Informationcontained herein is believed to be true and accurate, but all statements or suggestions are madewithout warranty, expressed or implied, regarding accuracy of the information, the hazardsconnected with the use of the material or the results to be obtained from the use thereof.Compliance with all applicable federal, state and local laws and local regulations remains theresponsibility of the user. This safety data sheet cannot cover all possible situations which the usermay experience during processing. Each aspect of your operation should be examined todetermine if, or where, additional precautions may be necessary. All health and safety informationcontained in this safety data sheet should be provided to your employees or customers. It is yourresponsibility to develop appropriate work practice guidelines and employee instructional programsfor your operation.DisclaimerProduct and Company Identification: SynonymsRevision information6 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
by | Sep 27, 2025
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
1 / 15
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
– Trade nameHALAR 902- Chemical nameCopolymer of ethylene and chlorotrifluoroethylene- SynonymsECTFE
1.2 Relevant identified uses of the substance or mixture and uses advised against
Uses of the Substance / Mixture
– For industrial use only
1.3 Details of the supplier of the safety data sheet
Company
SOLVAY SPECIALTY POLYMERS USA, LLC
4500 McGINNIS FERRY ROAD
30005-3914, ALPHARETTA
USA
Tel: +1-770-7728200
Fax: +1-770-7728213
Product Information:
+1-800-2210553
1.4 Emergency telephone
FOR EMERGENCIES INVOLVING A SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT, CONTACT CHEMTREC (24-Hour
Number): 800-424-9300 within the United States and Canada, or 703-527-3887 for international collect calls.
SECTION 2: Hazards identification
Although OSHA has not adopted the environmental portion of the GHS regulations, this document may include information on
environmental effects.
2.1 Classification of the substance or mixture
HCS 2012 (29 CFR 1910.1200)
Combustible dustMay form combustible dust concentrations in air.
2.2 Label elements
HCS 2012 (29 CFR 1910.1200)
Signal Word
– Warning
Hazard Statements
– May form combustible dust concentrations in air.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
2 / 15
2.3 Other hazards which do not result in classification
– This product as shipped is not a combustible dust, however if small particles are generated during further processing,
handling or by other means, combustible dust concentrations may form in the air.
SECTION 3: Composition/information on ingredients
3.1 Substance
– Not applicable, this product is a mixture.
3.2 Mixture
– SynonymsECTFE
Hazardous Ingredients and Impurities
– No ingredients are hazardous.
Non Hazardous Ingredients and Impurities
Chemical name
Identification number
CAS-No.
Concentration [%]
Ethene,chlorotrifluoro-,polymer with ethene25101-45-5 >= 99
SECTION 4: First aid measures
4.1 Description of first-aid measures
In case of inhalation
– Remove the subject from dusty environment and let him blow his nose.
Exposure to decomposition products
– Move to fresh air.
– Oxygen or artificial respiration if needed.
– Symptoms of poisoning may develop many hours after exposure.
– Keep under medical supervision for at least 48 hours.
In case of skin contact
– Wash off with soap and water.
Exposure to decomposition products
– Wash off with soap and water.
– If fingers/finger nails are touched, even if there is no pain, dip them in a bath of 5% calcium gluconate for 15 to 20
minutes.
– Consult a physician.
In case of eye contact
– In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Exposure to decomposition products
– Rinse immediately with plenty of water, also under the eyelids.
– Remove contact lenses.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
3 / 15
In case of ingestion
– If large quantities of this material are swallowed, call a physician immediately.
– Never give anything by mouth to an unconscious person.
4.2 Most important symptoms and effects, both acute and delayed
In case of inhalationEffects
– Mechanical irritation from the particulates generated by the product.
– The thermal decomposition vapors of fluorinated polymers may cause polymer fume fever with flu-like symptoms in
humans, especially when smoking contaminated tobacco.
Symptoms
– Headache
– Shortness of breath
– Cough
In case of skin contactEffects
– Mechanical irritation from the particulates generated by the product.
Symptoms
Exposure to decomposition products
– Irritation
– Redness
– Burn
In case of eye contactEffects
– Mechanical irritation from the particulates generated by the product.
Symptoms
Exposure to decomposition products
– Irritation
– Redness
– Burn
In case of ingestionEffects
– Low ingestion hazard.
4.3 Indication of any immediate medical attention and special treatment needed
– no data available
SECTION 5: Firefighting measures
Flash pointThe product is not flammable. Autoignition temperatureNo data availableFlammability / Explosive limitNo data available
5.1 Extinguishing media
Suitable extinguishing media
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
4 / 15
– Water
– powder
– Foam
– Dry chemical
– Carbon dioxide (CO2)
Unsuitable extinguishing media
– None.
5.2 Special hazards arising from the substance or mixture
Specific hazards during fire fighting- The product is not flammable.
– Not explosive
– In case of fire hazardous decomposition products may be produced such as:
Hazardous combustion products:
– Gaseous hydrogen fluoride (HF).
– Fluorophosgene
– Gaseous hydrogen chloride (HCl).
– Other hazardous decomposition products may be formed.
5.3 Advice for firefighters
Special protective equipment for fire-fighters
– Wear self-contained breathing apparatus and protective suit.
– When intervention in close proximity wear acid resistant over suit.
Further information
– Evacuate personnel to safe areas.
– Approach from upwind.
– Protect intervention team with a water spray as they approach the fire.
– Keep containers and surroundings cool with water spray.
– Keep product and empty container away from heat and sources of ignition.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel
– Prevent further leakage or spillage if safe to do so.
Advice for emergency responders
– Ensure adequate ventilation.
– Avoid dust formation.- Material can create slippery conditions.- Sweep up to prevent slipping hazard.- Keep away from open flames, hot surfaces and sources of ignition.
6.2 Environmental precautions
– Should not be released into the environment.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
5 / 15
– The product should not be allowed to enter drains, water courses or the soil.
– In case of accidental release or spill, immediately notify the appropriate authorities if required by Federal,
State/Provincial and local laws and regulations.
6.3 Methods and materials for containment and cleaning up
– Sweep up or vacuum up spillage and collect in suitable container for disposal.
6.4 Reference to other sections
– Refer to protective measures listed in sections 7 and 8.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
– Ensure adequate ventilation.
– Avoid dust formation.
– Use personal protective equipment.
– Do not contaminate tobacco products.
– Keep away from heat and sources of ignition.
– To avoid thermal decomposition, do not overheat.
– Take measures to prevent the build up of electrostatic charge.
– Clean and dry piping circuits and equipment before any operations.
– Ensure all equipment is electrically grounded before beginning transfer operations.
Hygiene measures
– Ensure that eyewash stations and safety showers are close to the workstation location.
– When using do not eat, drink or smoke.
– Wash hands before breaks and at the end of workday.
– Handle in accordance with good industrial hygiene and safety practice.
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/Storage conditions
– Keep away from heat and sources of ignition.
– Keep in properly labeled containers.
– Keep away from combustible material.
– Keep away from heat/sparks/open flames/hot surfaces. No smoking.
– Keep away from incompatible products
– Provide tight electrical equipment well protected against corrosion.
– Refer to protective measures listed in sections 7 and 8.
Packaging material
Suitable material
– glass
– Metals
– Plastic materials.
– cardboard outer-packaging
7.3 Specific end use(s)
– Contact your supplier for additional information
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
6 / 15
SECTION 8: Exposure controls/personal protection
Introductory Remarks: These recommendations provide general guidance for handling this product. Because specific work
environments and material handling practices vary, safety procedures should be developed for each intended application. Assistance
with selection, use and maintenance of worker protection equipment is generally available from equipment manufacturers.
8.1 Control parameters
– Contains no substances with occupational exposure limit values.
Components with workplace occupational exposure limits
ComponentsValue typeValue BasisParticles not otherwise specified (PNOS)National Institute for Occupational Safety and
Health
Includes all inert or nuisance dusts, whether mineral, inorganic, not listed specifically in
1910.1000., See Appendix D – Substances with No Established RELs
Particles not otherwise specified (PNOS)TWA15 mg/m3Occupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
Form of exposure : total dust
All inert or nuisance dusts, whether mineral, inorganic, or organic, not listed specifically
by substance name are covered by the Particulates Not Otherwise Regulated (PNOR)
limit which is the same as the inert or nuisance dust limit of Table Z-3.
Particles not otherwise specified (PNOS)TWA5 mg/m3Occupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
Form of exposure : respirable fraction
All inert or nuisance dusts, whether mineral, inorganic, or organic, not listed specifically
by substance name are covered by the Particulates Not Otherwise Regulated (PNOR)
limit which is the same as the inert or nuisance dust limit of Table Z-3.
Particles not otherwise specified (PNOS)TWA10 mg/m3American Conference of Governmental
Industrial Hygienists
Form of exposure : Inhalable fraction
Particles not otherwise specified (PNOS)TWA3 mg/m3American Conference of Governmental
Industrial Hygienists
Form of exposure : Respirable fraction
Threshold limit values of by-products from thermal decomposition:
Components with workplace occupational exposure limits
ComponentsValue typeValue BasisHydrofluoric acidTWA3 ppm
2.5 mg/m3
National Institute for Occupational Safety and
Health
Hydrofluoric acidC6 ppm
5 mg/m3
National Institute for Occupational Safety and
Health
15 minute ceiling value
Hydrofluoric acidTWA3 ppmOccupational Safety and Health Administration
– Table Z-2
Z37.28-1969
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
7 / 15
Hydrofluoric acidTWA0.5 ppmAmerican Conference of Governmental
Industrial Hygienists
Danger of cutaneous absorption
Expressed as :Fluorine
Hydrofluoric acidC2 ppmAmerican Conference of Governmental
Industrial Hygienists
Danger of cutaneous absorption
Expressed as :Fluorine
Hydrofluoric acidOccupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
See Table Z-2Expressed as :Fluorine
Hydrofluoric acidPEL0.4 ppm
0.33 mg/m3
SkinExpressed as :Fluorine
Hydrofluoric acidSTEL1 ppm
0.83 mg/m3
SkinExpressed as :Fluorine
Carbonyl difluorideTWA2 ppmAmerican Conference of Governmental
Industrial Hygienists
Carbonyl difluorideSTEL5 ppmAmerican Conference of Governmental
Industrial Hygienists
Carbonyl difluorideTWA2 ppm
5 mg/m3
National Institute for Occupational Safety and
Health
Carbonyl difluorideST5 ppm
15 mg/m3
National Institute for Occupational Safety and
Health
Carbonyl difluoridePEL2 ppm
5 mg/m3
Carbonyl difluorideSTEL5 ppm
15 mg/m3
hydrogen chloride (gas)C2 ppmAmerican Conference of Governmental
Industrial Hygienists
hydrogen chloride (gas)C5 ppm
7 mg/m3
National Institute for Occupational Safety and
Health
Often used in an aqueous solution.
hydrogen chloride (gas)C5 ppm
7 mg/m3
Occupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
8 / 15
The value in mg/m3 is approximate., Ceiling limit is to be determined from breathing-
zone air samples.
hydrogen chloride (gas)PEL0.3 ppm
0.45 mg/m3
hydrogen chloride (gas)C2 ppm
Biological Exposure Indices
ComponentsValue typeValue BasisHydrofluoric acidBEI2 mg/l
Fluoride
Urine
Prior to shift (16 hours
after exposure ceases)
American Conference of Governmental
Industrial Hygienists
Hydrofluoric acidBEI3 mg/l
Fluoride
Urine
End of shift (As soon as
possible after exposure
ceases)
American Conference of Governmental
Industrial Hygienists
8.2 Exposure controls
Control measures
Engineering measures
– Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.
– Provide local ventilation appropriate to the product decomposition risk (see section 10).
– Refer to protective measures listed in sections 7 and 8.
– Apply technical measures to comply with the occupational exposure limits.
– For additional information, consult the current edition of The Guide to the Safe Handling of Fluoropolymers
published by the Society of Plastics Industry, Inc. (SPI) Fluoropolymer Division.
Individual protection measures
Respiratory protection
– When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
– Use respirator when performing operations involving potential exposure to vapor of the product.
– When respirators are required, select NIOSH/MSHA approved equipment based on actual or potential airborne
concentrations and in accordance with the appropriate regulatory standards and/or industrial recommendations.
– Comply with OSHA respiratory protection requirements.
– For additional information, consult the current edition of The Guide to the Safe Handling of Fluoropolymers
published by the Society of Plastics Industry, Inc. (SPI) Fluoropolymer Division.
Hand protection
– Wear protective gloves.
– Protective gloves – impervious chemical resistant:
Suitable material
– Nitrile rubber
– PVC
– Neoprene gloves
– butyl-rubber
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
9 / 15
– Take note of the information given by the producer concerning permeability and break through times, and of special
workplace conditions (mechanical strain, duration of contact).
Eye protection
– Safety glasses with side-shields
– In case of high-temperature processing
– Tightly fitting safety goggles
Skin and body protection
– Long sleeved clothing
– Safety shoes
Hygiene measures
– Ensure that eyewash stations and safety showers are close to the workstation location.
– When using do not eat, drink or smoke.
– Wash hands before breaks and at the end of workday.
– Handle in accordance with good industrial hygiene and safety practice.
SECTION 9: Physical and chemical properties
Physical and Chemical properties here represent typical properties of this product. Contact the business area using the Product
information phone number in Section 1 for its exact specifications.
9.1 Information on basic physical and chemical properties
Appearance
Form:
pellets
Physical state:
solid
Color:
white Odorodorless Odor ThresholdNo data availablepHNo data availableMelting point/freezing pointMelting point/range: 419 – 446 F (215 – 230 C) Initial boiling point and boiling rangeBoiling point/boiling range
Not applicable
Flash pointThe product is not flammable. Evaporation rate (Butylacetate = 1)No data availableFlammability (solid, gas)The product is not flammable.May form combustible dust concentrations in air.Flammability / Explosive limitNo data availableAutoignition temperatureNo data availableVapor pressureNo data availableVapor densityNo data availableDensity1.65 – 1.71 g/cm3
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
10 / 15
Relative densityNo data availableSolubilityWater solubility:
insoluble
Solubility in other solvents:
common organic solvents : insoluble
Partition coefficient: n-octanol/waterNo data availableDecomposition temperature> 572 F (> 300 C)ViscosityNo data availableExplosive propertiesNot explosiveOxidizing propertiesNot considered as oxidizing.
9.2 Other information
No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
– No dangerous reaction known under conditions of normal use.
10.2 Chemical stability
– Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
– Under certain conditions, small dust-particles from the product may form flammable and explosive mixtures with the
air.
10.4 Conditions to avoid
– To avoid thermal decomposition, do not overheat.
– Keep away from flames and sparks.
10.5 Incompatible materials
– Combustible material
– Flammable materials
– Alkali metals (molten form)
10.6 Hazardous decomposition products
–
–
–
–
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
11 / 15
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Acute oral toxicityNo data availableAcute inhalation toxicityNo data available
Acute dermal toxicityNo data availableAcute toxicity (other routes of
administration)
No data availableSkin corrosion/irritationNo data availableSerious eye damage/eye irritationNo data availableRespiratory or skin sensitizationNo data available
Mutagenicity
Genotoxicity in vitroNo data availableGenotoxicity in vivoNo data availableCarcinogenicityNo data available
This product does not contain any ingredient designated as probable or suspected human carcinogens by:
NTP
IARC
OSHA
ACGIH
Toxicity for reproduction and development
Toxicity to reproduction / fertilityNo data availableDevelopmental Toxicity/TeratogenicityNo data available
STOT
STOT-single exposureNo data availableSTOT-repeated exposureNo data availableExperience with human exposureNo data available
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
12 / 15
Aspiration toxicityNo data availableFurther informationDescription of possible hazardous to health effects is based on experience and/or
toxicological characteristics of several ingredients.
Product dust may be irritating to eyes, skin and respiratory system.
The thermal decomposition vapors of fluorinated polymers may cause polymer
fume fever with flu-like symptoms in humans, especially when smoking
contaminated tobacco.
Thermal decomposition can lead to release of toxic and corrosive gases.
The exposure to decomposition products causes severe irritation of eyes, skin
and mucous membranes.
SECTION 12: Ecological information
12.1 Toxicity
Aquatic Compartment
Acute toxicity to fish No data availableAcute toxicity to daphnia and other
aquatic invertebrates
No data available
Toxicity to aquatic plantsNo data available
Toxicity to microorganismsNo data availableChronic toxicity to fishNo data availableChronic toxicity to daphnia and
other aquatic invertebrates
No data available
12.2 Persistence and degradability
Abiotic degradationNo data availablePhysical- and photo-chemical
elimination
No data availableBiodegradationNo data available
12.3 Bioaccumulative potential
Partition coefficient: n-octanol/waterNo data available
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
13 / 15
Bioconcentration factor (BCF)No data available
12.4 Mobility in soil
Adsorption potential (Koc)No data availableKnown distribution to environmental
compartments
No data available
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
No data availableRemarksEcological injuries are not known or expected under normal use.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product Disposal
– Do not dump into any sewers, on the ground, or into any body of water. All disposal methods must be in compliance with
all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations.
– Waste characterizations and compliance with applicable laws and regulations are the responsibility of the waste
generator.
– Can be incinerated, when in compliance with local regulations.
– The incinerator must be equipped with a system for the neutralization or recovery of HF.
Advice on cleaning and disposal of packaging
– Empty containers can be landfilled, when in accordance with the local regulations.
SECTION 14: Transport information
DOT
not regulated
TDG
not regulated
NOM
not regulated
IMDG
not regulated
IATA
not regulated
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
14 / 15
Note: The above regulatory prescriptions are those valid on the date of publication of this sheet. Given the possible evolution of
transportation regulations for hazardous materials, it would be advisable to check their validity with your sales office.
SECTION 15: Regulatory information
15.1 Notification status
Inventory InformationStatusUnited States TSCA Inventory-Canadian Domestic Substances List (DSL)-Australia Inventory of Chemical Substances (AICS)-Korea. Korean Existing Chemicals Inventory (KECI)-
imported by Solvay. Contact Solvay for
further details.
China. Inventory of Existing Chemical Substances in China (IECSC)-
imported by Solvay. Contact Solvay for
further details.
Japan. ISHL – Inventory of Chemical Substances-Japan. CSCL – Inventory of Existing and New Chemical Substances-Philippines Inventory of Chemicals and Chemical Substances (PICCS)-New Zealand. Inventory of Chemical Substances-EU. European Registration, Evaluation, Authorisation and Restriction of Chemical
(REACH)
–
Europe it is in compliance with REACH, if
not please contact the supplier.
Taiwan. Chemical Substance Inventory (TCSI)-
15.2 Federal Regulations
US. EPA EPCRA SARA Title III
Section 313 Toxic Chemicals (40 CFR 372.65)
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Section 302 Emergency Planning Extremely Hazardous Substance Threshold Planning Quantity (40 CFR 355)
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 302 Emergency Planning Extremely Hazardous Substance Reportable Quantity (40 CFR 355)
This material does not contain any components with a SARA 302 RQ.
Section 304 Emergency Release Notification Reportable Quantity (40 CFR 355)
This material does not contain any components with a section 304 EHS RQ.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
15 / 15
US. EPA CERCLA Hazardous Substances and Reportable Quantities (40 CFR 302.4)
This material does not contain any components with a CERCLA RQ.
15.3 State Regulations
US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65)
This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.
SECTION 16: Other information
Further information
– Product evaluated under the US GHS format.
Date Prepared:
Key or legend to abbreviations and acronyms used in the safety data sheet
– C Ceiling limit
– PEL Permissible exposure limit
– ST STEL – 15-minute TWA exposure that should not be exceeded at any time during a workday
– STEL Short term exposure limit
– TWA 8-hour, time-weighted average
-ACGIHAmerican Conference of Governmental Industrial Hygienists-OSHAOccupational Safety and Health Administration-NTPNational Toxicology Program-IARCInternational Agency for Research on Cancer-NIOSHNational Institute for Occupational Safety and Health
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at the date of its
publication. Such information is only given as a guidance to help the user handle, use, process, store, transport, dispose, and release
the product in satisfactory safety conditions and is not to be considered as a warranty or quality specification. It should be used in
conjunction with technical sheets but do not replace them. Thus, the information only relates to the designated specific product and may
not be applicable if such product is used in combination with other materials or in any other manufacturing process, unless otherwise
specifically indicated. It does not release the user from ensuring he is in conformity with all regulations linked to its activity.
by | Sep 27, 2025
SDS: 0060050
Date Prepared: 02/06/2017
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: Polyimide Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyimide
Molecular Formula: Not available
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: POLY1, IT7170.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
By excessive exposure to dust, eye and respiratory tract irritation is possible.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 70 Aquatic Chronic 4 (H413) –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Page 2 of 8Polyimide Tape SDS: 0060050 Date Prepared: 02/06/2017
Extinguishing Media to Avoid:
full water jet.
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
Date Prepared: 02/06/2017 Page 3 of 8Polyimide Tape SDS: 0060050
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: amber
Appearance: solid
Odor: odorless
Boiling Point: Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): 2000 mg/kg
No data
Page 5 of 8
inhalation
oral
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr
Polyimide Tape
.Not an expected route of
exposure
rat
SDS: 0060050
Acute Irritation
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Acute LD50
skin Not irritating
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin No data
Acute LD50
Sensitization
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
SDS: 0060050 Date Prepared: 02/06/2017 Page 6 of 8Polyimide Tape
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases
H413 – May cause long lasting harmful effects to aquatic life.
Date Prepared: 02/06/2017 Page 7 of 8
Modified siloxane/silicone resin
Polyimide Tape SDS: 0060050
verification. Before using any product, read its label.
Date Prepared: 02/06/2017 Page 8 of 8Polyimide Tape SDS: 0060050
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.
