by | Sep 27, 2025
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Release Films
Wrightlon 3800, Wrightlon 3700, Wrightlon 3900, Wrightlon 4600,
Dahlar Release Bag 125, Thermalimide RCBS
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Release Film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor.
see section 11: Toxicological information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 2 of 7
3. Composition / Information on ingredients
Chemical characterization:
Article: Thermoplastic film
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Remove residues with soap and water. After contact with molten product, cool skin area
rapidly with cold water. Do not peel solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation: Inhalation of dust may cause irritation of the respiratory system.
After contact with skin: Thermal decomposition products or aerosols can cause irritation.
Other symptoms: Itching redness of the skin and oedema (swelling).
The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 3 of 7
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid dust formation. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid dust
formation. Avoid the formation of aerosol/vapors. Avoid inhalation and contact with skin
and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protectionAt processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection At processing (recommended): Wear suitable protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 4 of 7
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber, neoprene (0.11 mm)
Breakthrough time: >480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapor. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 5 of 7
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Symptoms
In case of inhalation: Inhalation of dust may cause irritation of the respiratory system.
After contact with skin: Thermal decomposition products or aerosols can cause irritation.
Other symptoms: Itching redness of the skin and oedema (swelling).
The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 6 of 7
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in
the same way as the substance itself. Non-contaminated packages may be recycled. Do
not remove label until container is thoroughly cleaned.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Release Films
Material number 1026
Revision date: 1/9/2019
Version: 6
Language: en-US
Date of first version:4/27/2015
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Reason of change: Changes in section 1: product identifier
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Resin Infusion Products
Knitflow 110, Knitflow 150, PVC Tube, FlowPeel 160-37P16-ESG, Dahltexx SP-2,
Dahltexx SP-3, FlowRunner KF160, Vac-Brake, Vac-Brake Pro, Flowstrip PP4, Flowstrip
PP4 Max, Dahlvac RC Vacuum Hose, Flowlease 160-PP200, PP200, Dahlvac MB80,
Breatherflow 20, Dahlpac MC79, Tube mesh, SpiralMesh, Flowstrip, Flowstrip 39,
Flowstrip 39MAX, Greenflow 75, Greenflow 185, Knitflow 160, Knitflow 105 HT, Resinflow
100, Resinflow 60, Resinflow 20, Resinflow 90HT, Flowlease 160-37P16, Flowlease
75-37P16, Flowlease Blue, Flowlease Black, OF313, OF500, OF750, OF1000, OF625V,
Resintrak, Vactrak, VAC-RIC LT, VAC-RIC HT, RIC, RIC HT, RIA, polyethylene and nylon
tubing, , polyethylene and nylon spiral tubing, nylon fittings (NTF, NEF, NCF), Sil-tube,
HTRIL-S59, Infusion valve, Hose clamps A & B, Flowrunner PP2, Tac-Strip HT, PP150,
Dahlpac HT
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Resin distribution media and auxiliaries
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 2 of 8
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Thermoplastic, Silicone, Fiberglass, Metal
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 3 of 8
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective
clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe
fumes. Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 4 of 8
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, total dust)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 5 of 8
Melting point/freezing point: 212 – 500 F
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 6 of 8
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Avoid release to the environment.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 7 of 8
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Waste key number:
15 01 01 =paper and cardboard packaging or 150102 = Plastic packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:
not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 8 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – U.S. State Regulations
No data available
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be
examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be
provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of
this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU
regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected
with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
ADVANCED MATERIALS GROUP
CORPORATE HEADQUARTERS
5700 Skylab Road
Huntington Beach, CA 92647
Phone: (714) 899-8100
Fax: (714) 899-8179
E-mail: airtech@airtechintl.com
www.airtechonline.com
MORE THAN A MANUFACTURER A TECHNICAL PARTNER!
USA Luxembourg England China
This product is either non-hazardous and/or an article as defined by OHSA.
In accordance with OSHA 29 CFR 1910.1200, Safety Data Sheets (SDS)
are not required for products which are non -hazardous and/or articles.
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Pressure Sensitive Tapes
Toolwright 3R, 5R, Teflease MG2, MG2R, MG2A, MG2E Yellow, MG2 Orange, Wrightlease 2, 2R,
Wrighlease 4, Toolwright 3, 5, Tooltec A005, A007, A012, Tooltec CS5, CA5, TFG—AH series
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Pressure sensitive tape
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard
(29 CFR 1910.1200).
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 2 of 7
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with fever
and chills. Processing, e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid
inhalation of dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Pressure sensitive tape
Carrier type: PTFE, PTFE/Glass, cloth, fluoropolymer
Adhesive type: Silicone, rubber or acrylic
4. First aid measures
In case of inhalation: In case of inhalation of decomposition products, affected person should be moved into fresh air
and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of flowing
water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms,
consult an opthalmologist.
After swallowing: Not a probable route of exposure.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes from
burning or heating may cause polymer fume fever, a temporary flu-like illness with fever and
chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
Toxic fumes may be emitted at elevated temperatures. (> 380 C)
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 3 of 7
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions: Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid inhalation and contact with skin and
eyes. Wear appropriate protective equipment. Keep unprotected people away. Ensure adequate
ventilation, especially in confined areas.
Environmental precautions:Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up: Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the formation
of aerosol/vapors. Avoid inhalation and contact with skin and eyes. Wear appropriate protective
equipment. Keep unprotected people away. When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: At processing (recommended): Safety glasses in accordance with OSHA 29 CFR: 1910.133 or
ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 4 of 7
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise when
handling the product. If the concentration is exceeded, self-contained breathing apparatus must
be used.
General hygiene considerations:Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range: No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid: Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the formation
of aerosol/vapors.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 5 of 7
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Thermal decomposition: No data available
11. Toxicological information
Toxicological tests
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures.
Hazardous decomposition products:
Hydrogen fluoride, Hexafluoropropene, Carbonyl difluoride,
Symptoms
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes from
burning or heating may cause polymer fume fever, a temporary flu-like illness with fever and
chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 6 of 7
Additional ecological information
General information: Avoid release to the environment.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the
same way as the substance itself. Non-contaminated packages may be recycled. Do not
remove label until container is thoroughly cleaned.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA inventory
listing requirements.
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: General revision
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Pressure Sensitive Tapes
Teflease MG2, MG2R, MG2A, MG2E Yellow, MG2 Orange, Wrightlease 2, 2R,
Wrighlease 4, Toolwright 3, 5, Tooltec A005, A007, A012, Tooltec CS5, CA5, TFG—AH
series
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Pressure sensitive tape
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and WHMIS in Canada.
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of
fumes from burning or heating may cause polymer fume fever, a temporary flu-like illness
with fever and chills. Processing, e.g. by cutting, sawing or grinding, can produce
particles and dust. Avoid inhalation of dusts, as even inert dusts may functionally affect
respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Pressure sensitive tape
Carrier type: PTFE, PTFE/Glass, cloth, fluoropolymer
Adhesive type: Silicone, rubber or acrylic
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with
fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort,
shortage of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear
after 2 hours and decline within the next 36 to 48 hours. In case of prolonged exposure:
Possible danger of damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 3 of 8
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
Toxic fumes may be emitted at elevated temperatures. (> 380 C)
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon
monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid inhalation and contact with skin and eyes. Wear
appropriate protective equipment. Keep unprotected people away. When using do not eat,
drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Store at room
temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 4 of 8
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 5 of 8
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon
monoxide and carbon dioxide.
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 6 of 8
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures.
Hazardous decomposition products:
Hydrogen fluoride, Hexafluoropropene, Carbonyl difluoride,
Symptoms
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with
fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort,
shortage of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear
after 2 hours and decline within the next 36 to 48 hours. In case of prolonged exposure:
Possible danger of damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 7 of 8
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in
the same way as the substance itself. Non-contaminated packages may be recycled. Do
not remove label until container is thoroughly cleaned.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 8 of 8
Reason of change: Changes in section 1: Changes of product list Changes in section 1:
Company/undertaking identification
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards
connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Pressure Sensitive Tapes
Toolwright 3R, 5R, Teflease MG2, MG2R, MG2A, MG2E Yellow, MG2 Orange, Wrightlease 2, 2R,
Wrighlease 4, Toolwright 3, 5, Tooltec A005, A007, A012, Tooltec CS5, CA5, TFG—AH series
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Pressure sensitive tape
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard
(29 CFR 1910.1200).
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 2 of 7
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with fever
and chills. Processing, e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid
inhalation of dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Pressure sensitive tape
Carrier type: PTFE, PTFE/Glass, cloth, fluoropolymer
Adhesive type: Silicone, rubber or acrylic
4. First aid measures
In case of inhalation: In case of inhalation of decomposition products, affected person should be moved into fresh air
and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of flowing
water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms,
consult an opthalmologist.
After swallowing: Not a probable route of exposure.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes from
burning or heating may cause polymer fume fever, a temporary flu-like illness with fever and
chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
Toxic fumes may be emitted at elevated temperatures. (> 380 C)
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 3 of 7
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions: Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid inhalation and contact with skin and
eyes. Wear appropriate protective equipment. Keep unprotected people away. Ensure adequate
ventilation, especially in confined areas.
Environmental precautions:Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up: Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the formation
of aerosol/vapors. Avoid inhalation and contact with skin and eyes. Wear appropriate protective
equipment. Keep unprotected people away. When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: At processing (recommended): Safety glasses in accordance with OSHA 29 CFR: 1910.133 or
ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 4 of 7
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise when
handling the product. If the concentration is exceeded, self-contained breathing apparatus must
be used.
General hygiene considerations:Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range: No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid: Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the formation
of aerosol/vapors.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 5 of 7
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Thermal decomposition: No data available
11. Toxicological information
Toxicological tests
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures.
Hazardous decomposition products:
Hydrogen fluoride, Hexafluoropropene, Carbonyl difluoride,
Symptoms
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes from
burning or heating may cause polymer fume fever, a temporary flu-like illness with fever and
chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 6 of 7
Additional ecological information
General information: Avoid release to the environment.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the
same way as the substance itself. Non-contaminated packages may be recycled. Do not
remove label until container is thoroughly cleaned.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA inventory
listing requirements.
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 5/12/2023
Version: 5.3
Replaces version: 5.2
Language: en-US
Date of first version:7/27/2015
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: General revision
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
SDS: 0059128
Date Prepared: 02/05/2017
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: PTFE Tape
Product Description: Polytetrafluoroethylene
Synonyms: None
Chemical Family: Polytetrafluoroethylene
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: LETAPE, LETAPE A, TOOLCOAT 805A, TOOLCOAT S/T-02A, TOOLCOAT S/T-
02S, 6085/05.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
2. HAZARDS IDENTIFICATION
GHS Classification
Skin Corrosion / Irritation Hazard Category 2
Specific Target Organ Toxicity – Single Exposure Hazard Category 3
LABEL ELEMENTS
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
Signal Word
Warning
Hazard Statements
May cause respiratory irritation
Causes skin irritation
Precautionary Statements
Avoid breathing dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wash face, hands and any exposed skin thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER or doctor/physician if you feel unwell.
IF ON SKIN: Wash with plenty of soap and water.
Specific treatment (see supplemental first aid instructions on this label).
If skin irritation occurs: Get medical advice/attention.
Take off all contaminated clothing and wash it before reuse.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Dispose of contents/container in accordance with local and national regulations.
Hazards Not Otherwise Classified (HNOC), Other Hazards
By excessive exposure to dust, eye and respiratory tract irritation is possible.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
1,1,5,5,5-Hexamethyl-3,3-
bis[(trimethylsilyl)oxy]trisiloxane
3555-47-3
0 – 40 STOT Single 3 (H335)
Skin Irrit. 2 (H315)
Eye Irrit. 2A (H319)
–
Modified siloxane/silicone resin
68440-70-0
0 – 30 Aquatic Chronic 4 (H413) –
glass, oxide, chemicals
65997-17-3
0 – 40 Not Classified –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
SDS: 0059128 Date Prepared: 02/05/2017 Page 2 of 9PTFE Tape
Skin Contact:
Remove contaminated clothing and shoes without delay. Wash immediately with plenty of water. Do not reuse
contaminated clothing without laundering. Get medical attention if pain or irritation persists after washing or if signs
and symptoms of overexposure appear.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is
known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal
Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: Wash hands thoroughly after handling. Wear protective gloves. Use only outdoors or in a well-
ventilated area. Avoid breathing dust.
Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not
recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat,
smoke and possibly fire.
Date Prepared: 02/05/2017 Page 3 of 9PTFE Tape SDS: 0059128
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: tape
Odor: odorless
Boiling Point: Not applicable
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content:
Flash Point: Not available
Flammability (solid, gas): Not available
1 f/cc respirable fibers (TWA)
5 mg/m inhalable fraction (TWA)
PTFE Tape SDS: 0059128
Other Value: Not established
65997-17-3 glass, oxide, chemicals
Date Prepared: 02/05/2017
OSHA (PEL): Not established
Page 4 of 9
ACGIH (TLV):
9. PHYSICAL AND CHEMICAL PROPERTIES
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
Polymerization: Will not occur
Materials To Avoid: Acids
Bases
fluorine
Avoid strong oxidizers
Hazardous Decomposition
Products:
Oxides of sulfur (includes sulfur di and tri oxides)
silicon dioxide
oxides of silicon
carbonyl fluoride
Hydrogen fluoride
Carbon monoxide and carbon dioxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
.Not an expected route of
exposure
Date Prepared: 02/05/2017
dermal rabbit
Page 5 of 9
Acute LD50 .>2000 mg/kg
PTFE Tape
inhalation
oral (gavage)
rat Acute LC50 4 hr
SDS: 0059128
.Not an expected route of
exposure
rat Acute LD50
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
This material is not classified as dangerous for the environment.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
dermal
Sensitization
Glass oxide is considered a nuisance particulate which will not cause adverse health effects other than respiratory
congestion or irritation.
Irritating
inhalation Not an expected route of
exposure
Page 6 of 9PTFE Tape
Acute Irritation
SDS: 0059128
Ames Salmonella Assay
eye
No data
Not an expected route of
exposure
Date Prepared: 02/05/2017
Acute Irritation
Sensitization
The chemical, physical, and toxicological properties of this material have not been fully investigated. Direct contact is
expected to cause moderate eye and skin irritation. Inhalation exposure of this material may cause irritation to mucous
membranes and respiratory tract.
dermal Not sensitizing
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
1,1,5,5,5-Hexamethyl-3,3-
bis[(trimethylsilyl)oxy]trisiloxane
3555-47-3
Not available Not available Not available
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
glass, oxide, chemicals
65997-17-3
Not available Not available Not available
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
Page 7 of 9PTFE Tape SDS: 0059128 Date Prepared: 02/05/2017
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Acute
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/05/2017
Date of last significant revision:02/01/2017
H335 – May cause respiratory irritation.
H315 – Causes skin irritation.
H319 – Causes serious eye irritation.
Page 8 of 9PTFE Tape
Modified siloxane/silicone resin
SDS: 0059128
H413 – May cause long lasting harmful effects to aquatic life.
Date Prepared: 02/05/2017
1,1,5,5,5-Hexamethyl-3,3-bis[(trimethylsilyl)oxy]trisiloxane
verification. Before using any product, read its label.
SDS: 0059128 Date Prepared: 02/05/2017 Page 9 of 9PTFE Tape
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.
by | Sep 27, 2025
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 1 of 12
1. Product and company identification
Product identifier
Trade name: Toolfusion 3A
Relevant identified uses of the substance or mixture and uses advised against
General use: Epoxy resin
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: liquid
Color: yellowish
Odor: characteristic
Classification: Sensitization – skin – Category 1;
Hazard symbols:
Signal word: Warning
Hazard statements:
May cause an allergic skin reaction.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 2 of 12
Precautionary statements:
Avoid breathing vapors.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Epoxy resin and traces of Styrene, 1,3-Butadiene, Acrylonitrile, Methyl methacrylate.
Relevant ingredients:
CAS No. Designation Content Classification
CAS
2386-87-0
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-
oxabicyclo[4.1.0]heptane-3-carboxylate
>= 70 % Sensitization – skin –
Category 1.
Additional information:The maximum workplace exposure limits are, where necessary, listed in section 8.
4. First aid measures
In case of inhalation:Move victim to fresh air; if necessary, provide artificial respiration or oxygen.
Seek medical attention.
Following skin contact:Contaminated/fouled clothing and shoes must be removed immediately.
Immediately clean with water and soap followed by thorough rinsing.
Seek medical treatment in case of troubles.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Subsequently seek the immediate attention of an ophthalmologist.
After swallowing: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult physician immediately.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
395.6 F
Auto-ignition temperature:
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 3 of 12
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
In case of fire may be liberated: Phenols, carbon monoxide and carbon dioxide.
Formation of numerous unknown compounds is possible.
Protective equipment and precautions for firefighters:
Wear self-contained breathing apparatus. Wear appropriate protective equipment.
Additional information:Cool endangered containers with water spray and, if possible, remove from danger zone.
Use a water fog to control vapors. Do not breathe fumes.
Do not allow water used to extinguish fire to enter drains, ground or waterways.
6. Accidental release measures
Personal precautions:Avoid contact with skin, eyes, and clothing. Do not breathe vapor or spray.
Wear appropriate protective equipment. Ensure adequate ventilation, especially in
confined areas.
Keep unprotected people away. Take off contaminated clothing and wash it before reuse.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Plug leak if safely possible.
Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder.
Store in special closed containers and dispose of according to ordinance.
In case of greater quantities: Collect mechanically (use only explosion-proof equipment
when pumping out).
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed.
Avoid contact with skin, eyes, and clothing. Do not breathe vapor or spray.
Wear appropriate protective equipment. When using do not eat, drink or smoke.
Take off contaminated clothing and wash it before reuse.
Precautions against fire and explosion:
Usual measures for fire prevention.
Storage
Requirements for storerooms and containers:
Keep container tightly closed in a cool, well-ventilated place.
Take care when re-opening already used containers.
Protect from heat and direct sunlight. Keep container dry.
Handle empty containers with care. Incineration may cause explosion.
Hints on joint storage:Do not store together with strong bases, oxidizing agents, strong acids or amines.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 4 of 12
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
CAS No.Designation Type Limit value
100-42-5Styrene USA: ACGIH: STEL 170 mg/m ; 40 ppm
USA: ACGIH: TWA 85 mg/m ; 20 ppm
USA: NIOSH: STEL 425 mg/m ; 100 ppm
USA: NIOSH: TWA 215 mg/m ; 50 ppm
USA: OSHA: Ceiling 200 ppm
(Acceptable maximum peak above
the acceptable ceiling concentration
for an 8-hr shift: 600 ppm 5 mins. in
any 3 hrs.)
USA: OSHA: TWA 100 ppm
(Acceptable maximum peak above
the acceptable ceiling concentration
for an 8-hr shift: 600 ppm 5 mins. in
any 3 hrs.)
80-62-6Methyl
methacrylate
USA: ACGIH: STEL 410 mg/m ; 100 ppm
USA: ACGIH: TWA 205 mg/m ; 50 ppm
USA: NIOSH: TWA 410 mg/m ; 100 ppm
USA: OSHA: TWA 410 mg/m ; 100 ppm
106-99-01,3-Butadiene USA: ACGIH: TWA 4.4 mg/m ; 2 ppm
USA: OSHA: STEL 11 mg/m ; 5 ppm
USA: OSHA: TWA 2.21 mg/m ; 1 ppm
107-13-1Acrylonitrile USA: ACGIH: TWA 4.3 mg/m ; 2 ppm
(may be absorbed through the skin)
USA: NIOSH: Ceiling 10 ppm
(may be absorbed through the skin)
USA: NIOSH: TWA 1 ppm
(may be absorbed through the skin)
USA: OSHA: Ceiling 10 ppm
(may be absorbed through the skin)
USA: OSHA: TWA 2 ppm
(may be absorbed through the skin)
Biological limit values:
CAS No.DesignationType Limit valueParameter Sampling
100-42-5Styrene USA:
ACGIH-
BEI, urine
40 g/L Styrene in urine end of
exposure or
end of shift
USA:
ACGIH-
BEI, urine
400 mg/g
creatinine
Mandelic acid + Phenylglyoxylic
acid
end of
exposure or
end of shift
106-99-01,3-ButadieneUSA:
ACGIH-
BEI, blood
2.5 pmol/g HbMixture of N-1 and
N2-(hydroxybutenyl)valine
hemoglobin (Hb) adduts
No restriction
USA:
ACGIH-
BEI, urine
2.5 mg/L 1,2
Dihydroxy-4-(N-acetylcysteinyl)-
butane
end of
exposure or
end of shift
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 5 of 12
Engineering controls
Provide adequate ventilation, and local exhaust as needed.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protectionTightly sealed goggles according to OSHA Standard – 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection Wear suitable protective clothing.
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: Neoprene.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:When vapors form, use respiratory protection.
Recommended: Use filter type A (= against vapors of organic substances) according to
OSHA Standard – 29 CFR: 1910.134 or ANSI Z88.2.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapour/aerosol/particulates) that may arise when handling the product. If the
concentration is exceeded, self-contained breathing apparatus must be used.
General hygiene considerations:
Avoid contact with skin, eyes, and clothing.
Do not breathe vapor or spray. Wear appropriate protective equipment.
Work place should be equipped with a shower and an eye rinsing apparatus.
When using do not eat, drink or smoke.
Wash hands before breaks and after work.
Take off contaminated clothing and wash it before reuse.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: liquid
Color: yellowish
Odor: characteristic
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:> 482 F
Flash point/flash point range: 395.6 F
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: 1.1 g/mL
Water solubility: negligible
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 6 of 12
10. Stability and reactivity
Reactivity: No data available
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
Avoid contact with: amines (aliphatic). Polymerization along with heat production.
Conditions to avoid:Keep away from heat sources, sparks and open flames.
Heating will lead to pressure increase: Danger of bursting and explosion.
Incompatible materials:Strong oxidizing agents, Lewis-acid or mineral acids and bases (organic and inorganic).
Hazardous decomposition products:
Emits toxic fumes under fire conditions.
In case of fire may be liberated: phenols, carbon monoxide and carbon dioxide.
Formation of numerous unknown compounds is possible.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 7 of 12
Other information: Information about styrene:
Harmful if inhaled. Suspected of damaging fertility or the unborn child. Causes damage
to organs through prolonged or repeated exposure. lung damages May be fatal if
swallowed and enters airways. Causes serious eye irritation. Causes skin irritation.
For carcinogenic effects: IARC Rating: Group 2B OSHA Carcinogen: not listed NTP
Rating: not listed
Information about 1,3-Butadiene:
May cause cancer. May cause genetic defects.
Information about Acrylonitrile:
Toxic if swallowed, in contact with skin or if inhaled. May cause cancer. Causes serious
eye damage. May cause an allergic skin reaction. Causes skin irritation. May cause
respiratory irritation.
Information about Methyl methacrylate:
May cause an allergic skin reaction. Causes skin irritation. May cause respiratory
irritation.
Symptoms
In case of ingestion:
Irritations of mucous membranes in the mouth, pharynx, oesophagus and gastrointestinal
tract.
After eye contact: Causes tears. Pain, redness.
12. Ecological information
Ecotoxicity
Aquatic toxicity: Information about
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-oxabicyclo[4.1.0]heptane-3-carboxylate:
Fish toxicity:
EC50 Oncorhynchus mykiss: 24 mg/L/96 h (OECD 203).
Daphnia toxicity:
LC50 Daphnia magna (Big water flea): 40 mg/L/48h (OECD 202).
Algae toxicity:
EC50 Pseudokirchneriella subcapitata (green algae): 90 mg/L/72h (OECD 201).
Effects in sewage plants:Information about
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-oxabicyclo[4.1.0]heptane-3-carboxylate:
Toxicity to microorganisms:
EC50 activated sludge: >2000 mg/L/3h (OECD 209).
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 8 of 12
Contaminated packaging
Recommendation: Waste key number 150102: Plastic container
Waste key number 150104: Packages of metal
Empty carefully and completely, if possible.
Dispose of waste according to applicable legislation.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 9 of 12
15. Regulatory information
National regulations – U.S. Federal Regulations
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-
oxabicyclo[4.1.0]heptane-3-carboxylate:
TSCA Inventory: listed
TSCA HPVC: not listed
Styrene: TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 2B
OSHA Carcinogen: not listed
NTP Rating: listed
Clean Air Act:
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Clean Water Act:
Hazardous Substances: RQ 1000 lbs.
Other Environmental Laws:
CERCLA: RQ 1000 lbs.
RCRA Groundwater Monitoring: Methods 8020, 8240
/ PQL 1, 5
SARA Title III Section 313, Toxic Release: Conc.
0.1% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0571
Methyl methacrylate: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
TSCA: listed – Flags: T
Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Clean Air Act:
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Clean Water Act:
Hazardous Substances: RQ 1000 lbs.
Other Environmental Laws:
CERCLA: RQ 1000 lbs.
RCRA Hazardous Wastes: Code U162
RCRA Groundwater Monitoring: Methods 8015, 8240
/ PQL 2, 5
SARA Title III Section 313, Toxic Release: Conc.
1.0% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0426
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 10 of 12
1,3-Butadiene: TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 1
OSHA Carcinogen: listed
NTP Rating: listed
Clean Air Act:
Accidental Release Prevention: Threshold 10000 lbs.
/ Basis for listing = f
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Other Environmental Laws:
CERCLA: RQ 10 lbs.
SARA Title III Section 313, Toxic Release: Conc.
0.1% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0067
Acrylonitrile: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 2B
OSHA Carcinogen: listed
NTP Rating: listed
Clean Air Act:
Accidental Release Prevention: Threshold 20000 lbs.
/ Basis for listing = b
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Clean Water Act:
Hazardous Substances: RQ 100 lbs.
Priority Pollutant: yes
Other Environmental Laws:
CERCLA: RQ 100 lbs.
RCRA Hazardous Wastes: Code U009
RCRA Groundwater Monitoring: Methods 8030, 8240
/ PQL 5, 5
SARA Title III Section 302, EHS: TPQ 10000 lbs. /
RQ 100 lbs.
SARA Title III Section 313, Toxic Release: Conc.
0.1% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0014
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 11 of 12
National regulations – U.S. State Regulations
Styrene: Delaware Air Quality Management List:
DRQ: 1000 – RQ State: Federal Regulations Apply
Idaho Air Pollutant List:
Title 585 — AAC: 1 — EL: 6.67 — WEL: – Title 586 –
Maine Hazardous Air Pollutants:
Me 2005: HAP – Hap Rpt: 2000
Massachusetts Haz. Substance codes: 1,2,4,5,6,9 *E*C* F7 F8
Michigan Critical Material:
Note: 2 – CMR#: 27 – Parameter#: 00100-42-5 – Annual Usage Parameter: 100
Minnesota Haz. Substance:
Codes: ANO — Ratings: 9.63 — Status: Air Pollutant. Carcinogen. Title III. TRI.
New Jersey RTK Hazardous Substance:
DOT 2055 – Sub No.: 1748 – TPQ: –
New York List of Hazardous Substances:
RQ — Air: 1000 – RQ — Land: 1 – Note: No Note Associated with this chemical.
Pennsylvania Haz. Substance code: E
Washington Air Contaminant:
TWA: 50 ppm / 215 mg — STEL: 100 ppm / 425 mg
California Proposition 65: cancer
Methyl methacrylate:Delaware Air Quality Management List:
DRQ: 1000 – RQ State: Federal Regulations Apply
Idaho Air Pollutant List:
Title 585; AAC: 20,5 – EL: 27,3 – OEL: 410 – Title 586: –
Massachusetts Haz. Substance Codes: 2,4,5,6 F8 F9
Main: HAP – 2000
Minnesota Haz. Substance:
Codes: AO – Ratings: 3.79 – Status: Air Pollutant. Title III. TRI.
New Jersey RTK Hazardous Substance:
DOT: 1247 – Sub No.: 1277
New York List of Hazardous Substances:
RQ-Air: 1000 – RQ-Land: 1
No Note Associated with this chemical
Pennsylvania Haz. Substance Code: E
Washington Air Contaminant: TWA: 100 ppm = 410 mg
1,3-Butadiene: California Proposition 65: cancer
Acrylonitrile: California Proposition 65: cancer
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Text for labeling: Contains >= 70 %
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-oxabicyclo[4.1.0]heptane-3-carboxylate. Safety
data sheet available on request.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 12 of 12
Hazard rating systems:
1
20
NFPA Hazard Rating:
Health: 2 (Moderate)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 2 (Moderate)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Reason of change: Changes in section 1: Company/undertaking identification
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Toolfusion 3B
Relevant identified uses of the substance or mixture and uses advised against
General use: Modified Anhydride Curing Agent.
For industrial purposes only.
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: liquid
Color: colorless, clear
Odor: characteristic
Classification: Eye Damage – Category 1; Respiratory Sensitizer – Category 1; Sensitization – skin –
Category 1;
Hazard symbols:
Signal word: Danger
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 2 of 7
Hazard statements:
May cause an allergic skin reaction.
Causes serious eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements:
Avoid breathing vapors.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection.
[In case of inadequate ventilation] wear respiratory protection.
IF ON SKIN: Wash with plenty of water/soap.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Immediately call a POISON CENTER/doctor.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation or rash occurs: Get medical advice/attention.
If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
Take off contaminated clothing and wash it before reuse.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
see section 11: Toxicological information
3. Composition / Information on ingredients
Relevant ingredients:
CAS No. Designation Content Classification
CAS
19438-60-9
Hexahydro-4-
methylphthalic
anhydride
97.8 – 100 % Eye Damage – Category 1.
Respiratory Sensitizer – Category 1.
Sensitization – skin – Category 1.
4. First aid measures
In case of inhalation:Move victim to fresh air; if necessary, provide artificial respiration or oxygen. Seek
medical attention.
Following skin contact:Immediately clean with water and soap followed by thorough rinsing. Take off
immediately all contaminated clothing and wash it before reuse. In case of skin irritation,
consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Subsequently seek the immediate attention of an ophthalmologist.
After swallowing: Rinse mouth with water. Do not induce vomiting.
Give affected person large quantities of water, better milk. Seek medical attention.
Never give anything by mouth to an unconscious person.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Causes serious eye damage.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 3 of 7
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
230 F (Hexahydro-4-methylphthalic anhydride)
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, foam, dry chemical powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
Emits toxic fumes under fire conditions.
In case of fire may be liberated: hydrocarbons, carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Heating causes rise in pressure with risk of bursting. Cool
endangered containers with water spray and, if possible, remove from danger zone. Fight
fire from a safe distance. Stay upwind/keep distance from source.
6. Accidental release measures
Personal precautions:Provide adequate ventilation. Avoid contact with skin, eyes, and clothing. Do not breathe
vapor or spray. Wear appropriate protective equipment.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal
binding agents) and place in closed containers for disposal.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid contact with skin, eyes,
and clothing. Do not breathe vapor or spray. Wear appropriate protective equipment.
When using do not eat, drink or smoke. Wash hands before breaks and after work.
Precautions against fire and explosion:
Keep away from heat sources, sparks and open flames.
Storage
Requirements for storerooms and containers:
Keep container tightly closed in a cool, well-ventilated place. Keep container dry.
Do not drop, drag or bang the container. Protect from frost. Protect against direct sunlight.
Hints on joint storage:Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 4 of 7
8. Exposure controls / personal protection
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protectionTightly sealed goggles according to OSHA Standard – 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection Wear suitable protective clothing.
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: Rubber.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:When vapors form, use respiratory protection.
Use filter type A (= against vapors of organic substances) according to OSHA Standard –
29 CFR: 1910.134 or ANSI Z88.2.
General hygiene considerations:
Avoid contact with skin, eyes, and clothing. Do not breathe vapor or spray. Work place
should be equipped with a shower and an eye rinsing apparatus. When using do not eat,
drink or smoke. Wash hands before breaks and after work.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: liquid
Color: colorless, clear
Odor: characteristic
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: 230 F (Hexahydro-4-methylphthalic anhydride)
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: 5.7 hPa
Vapor density: No data available
Density: 1.16 g/mL
Water solubility: Contact with water liberates acid.
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Viscosity, kinematic: 90 – 110 mPa*s
Solid content: >= 99 %
10. Stability and reactivity
Reactivity: Contact with water liberates acid.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 5 of 7
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
Hazardous polymerisation: Will not occur.
Conditions to avoid:Excessive heating, humidity. Keep away from heat sources, sparks and open flames.
Avoid the formation of aerosol/vapors.
Incompatible materials:Avoid contact with strong oxidizing agents and Water .
Hazardous decomposition products:
In case of fire may be liberated: hydrocarbons, carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Eye Damage – Category 1 = Causes serious eye damage.
Sensitisation to the respiratory tract: Respiratory Sensitizer –
Category 1 = May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Symptoms
In case of inhalation:
Symptoms: Tickel in the throat, cough, wheezing, shortness of breath.
After contact with skin: Upon direct contact with skin may cause itching and redness.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 6 of 7
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Contaminated packaging
Recommendation: Waste key number 150102 – Plastic packaging
Waste key number 150104 – Metallic packaging
Dispose of waste according to applicable legislation.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Hexahydro-4-methylphthalic anhydride:TSCA Inventory: listed
TSCA HPVC: not listed
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Text for labeling: Contains 97.8 – 100 % Hexahydro-4-methylphthalic anhydride. Safety data sheet
available on request.
Hazard rating systems:
1
21
NFPA Hazard Rating:
Health: 2 (Moderate)
Fire: 1 (Slight)
Reactivity: 1 (Slight)
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 1
X
HMIS Version III Rating:
Health: 2 (Moderate)
Flammability: 1 (Slight)
Physical Hazard: 1 (Slight)
Personal Protection: X = Consult your supervisor
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 7 of 7
Reason of change: Changes in section 1: Company/undertaking identification
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 1 of 12
1. Product and company identification
Product identifier
Trade name: Toolfusion 3A
Relevant identified uses of the substance or mixture and uses advised against
General use: Epoxy resin
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: liquid
Color: yellowish
Odor: characteristic
Classification: Sensitization – skin – Category 1;
Hazard symbols:
Signal word: Warning
Hazard statements:
May cause an allergic skin reaction.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 2 of 12
Precautionary statements:
Avoid breathing vapors.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Epoxy resin and traces of Styrene, 1,3-Butadiene, Acrylonitrile, Methyl methacrylate.
Relevant ingredients:
CAS No. Designation Content Classification
CAS
2386-87-0
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-
oxabicyclo[4.1.0]heptane-3-carboxylate
>= 70 % Sensitization – skin –
Category 1.
Additional information:The maximum workplace exposure limits are, where necessary, listed in section 8.
4. First aid measures
In case of inhalation:Move victim to fresh air; if necessary, provide artificial respiration or oxygen.
Seek medical attention.
Following skin contact:Contaminated/fouled clothing and shoes must be removed immediately.
Immediately clean with water and soap followed by thorough rinsing.
Seek medical treatment in case of troubles.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Subsequently seek the immediate attention of an ophthalmologist.
After swallowing: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult physician immediately.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
395.6 F
Auto-ignition temperature:
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 3 of 12
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
In case of fire may be liberated: Phenols, carbon monoxide and carbon dioxide.
Formation of numerous unknown compounds is possible.
Protective equipment and precautions for firefighters:
Wear self-contained breathing apparatus. Wear appropriate protective equipment.
Additional information:Cool endangered containers with water spray and, if possible, remove from danger zone.
Use a water fog to control vapors. Do not breathe fumes.
Do not allow water used to extinguish fire to enter drains, ground or waterways.
6. Accidental release measures
Personal precautions:Avoid contact with skin, eyes, and clothing. Do not breathe vapor or spray.
Wear appropriate protective equipment. Ensure adequate ventilation, especially in
confined areas.
Keep unprotected people away. Take off contaminated clothing and wash it before reuse.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Plug leak if safely possible.
Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder.
Store in special closed containers and dispose of according to ordinance.
In case of greater quantities: Collect mechanically (use only explosion-proof equipment
when pumping out).
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed.
Avoid contact with skin, eyes, and clothing. Do not breathe vapor or spray.
Wear appropriate protective equipment. When using do not eat, drink or smoke.
Take off contaminated clothing and wash it before reuse.
Precautions against fire and explosion:
Usual measures for fire prevention.
Storage
Requirements for storerooms and containers:
Keep container tightly closed in a cool, well-ventilated place.
Take care when re-opening already used containers.
Protect from heat and direct sunlight. Keep container dry.
Handle empty containers with care. Incineration may cause explosion.
Hints on joint storage:Do not store together with strong bases, oxidizing agents, strong acids or amines.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 4 of 12
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
CAS No.Designation Type Limit value
100-42-5Styrene USA: ACGIH: STEL 170 mg/m ; 40 ppm
USA: ACGIH: TWA 85 mg/m ; 20 ppm
USA: NIOSH: STEL 425 mg/m ; 100 ppm
USA: NIOSH: TWA 215 mg/m ; 50 ppm
USA: OSHA: Ceiling 200 ppm
(Acceptable maximum peak above
the acceptable ceiling concentration
for an 8-hr shift: 600 ppm 5 mins. in
any 3 hrs.)
USA: OSHA: TWA 100 ppm
(Acceptable maximum peak above
the acceptable ceiling concentration
for an 8-hr shift: 600 ppm 5 mins. in
any 3 hrs.)
80-62-6Methyl
methacrylate
USA: ACGIH: STEL 410 mg/m ; 100 ppm
USA: ACGIH: TWA 205 mg/m ; 50 ppm
USA: NIOSH: TWA 410 mg/m ; 100 ppm
USA: OSHA: TWA 410 mg/m ; 100 ppm
106-99-01,3-Butadiene USA: ACGIH: TWA 4.4 mg/m ; 2 ppm
USA: OSHA: STEL 11 mg/m ; 5 ppm
USA: OSHA: TWA 2.21 mg/m ; 1 ppm
107-13-1Acrylonitrile USA: ACGIH: TWA 4.3 mg/m ; 2 ppm
(may be absorbed through the skin)
USA: NIOSH: Ceiling 10 ppm
(may be absorbed through the skin)
USA: NIOSH: TWA 1 ppm
(may be absorbed through the skin)
USA: OSHA: Ceiling 10 ppm
(may be absorbed through the skin)
USA: OSHA: TWA 2 ppm
(may be absorbed through the skin)
Biological limit values:
CAS No.DesignationType Limit valueParameter Sampling
100-42-5Styrene USA:
ACGIH-
BEI, urine
40 g/L Styrene in urine end of
exposure or
end of shift
USA:
ACGIH-
BEI, urine
400 mg/g
creatinine
Mandelic acid + Phenylglyoxylic
acid
end of
exposure or
end of shift
106-99-01,3-ButadieneUSA:
ACGIH-
BEI, blood
2.5 pmol/g HbMixture of N-1 and
N2-(hydroxybutenyl)valine
hemoglobin (Hb) adduts
No restriction
USA:
ACGIH-
BEI, urine
2.5 mg/L 1,2
Dihydroxy-4-(N-acetylcysteinyl)-
butane
end of
exposure or
end of shift
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 5 of 12
Engineering controls
Provide adequate ventilation, and local exhaust as needed.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protectionTightly sealed goggles according to OSHA Standard – 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection Wear suitable protective clothing.
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: Neoprene.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:When vapors form, use respiratory protection.
Recommended: Use filter type A (= against vapors of organic substances) according to
OSHA Standard – 29 CFR: 1910.134 or ANSI Z88.2.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapour/aerosol/particulates) that may arise when handling the product. If the
concentration is exceeded, self-contained breathing apparatus must be used.
General hygiene considerations:
Avoid contact with skin, eyes, and clothing.
Do not breathe vapor or spray. Wear appropriate protective equipment.
Work place should be equipped with a shower and an eye rinsing apparatus.
When using do not eat, drink or smoke.
Wash hands before breaks and after work.
Take off contaminated clothing and wash it before reuse.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: liquid
Color: yellowish
Odor: characteristic
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:> 482 F
Flash point/flash point range: 395.6 F
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: 1.1 g/mL
Water solubility: negligible
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 6 of 12
10. Stability and reactivity
Reactivity: No data available
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
Avoid contact with: amines (aliphatic). Polymerization along with heat production.
Conditions to avoid:Keep away from heat sources, sparks and open flames.
Heating will lead to pressure increase: Danger of bursting and explosion.
Incompatible materials:Strong oxidizing agents, Lewis-acid or mineral acids and bases (organic and inorganic).
Hazardous decomposition products:
Emits toxic fumes under fire conditions.
In case of fire may be liberated: phenols, carbon monoxide and carbon dioxide.
Formation of numerous unknown compounds is possible.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 7 of 12
Other information: Information about styrene:
Harmful if inhaled. Suspected of damaging fertility or the unborn child. Causes damage
to organs through prolonged or repeated exposure. lung damages May be fatal if
swallowed and enters airways. Causes serious eye irritation. Causes skin irritation.
For carcinogenic effects: IARC Rating: Group 2B OSHA Carcinogen: not listed NTP
Rating: not listed
Information about 1,3-Butadiene:
May cause cancer. May cause genetic defects.
Information about Acrylonitrile:
Toxic if swallowed, in contact with skin or if inhaled. May cause cancer. Causes serious
eye damage. May cause an allergic skin reaction. Causes skin irritation. May cause
respiratory irritation.
Information about Methyl methacrylate:
May cause an allergic skin reaction. Causes skin irritation. May cause respiratory
irritation.
Symptoms
In case of ingestion:
Irritations of mucous membranes in the mouth, pharynx, oesophagus and gastrointestinal
tract.
After eye contact: Causes tears. Pain, redness.
12. Ecological information
Ecotoxicity
Aquatic toxicity: Information about
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-oxabicyclo[4.1.0]heptane-3-carboxylate:
Fish toxicity:
EC50 Oncorhynchus mykiss: 24 mg/L/96 h (OECD 203).
Daphnia toxicity:
LC50 Daphnia magna (Big water flea): 40 mg/L/48h (OECD 202).
Algae toxicity:
EC50 Pseudokirchneriella subcapitata (green algae): 90 mg/L/72h (OECD 201).
Effects in sewage plants:Information about
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-oxabicyclo[4.1.0]heptane-3-carboxylate:
Toxicity to microorganisms:
EC50 activated sludge: >2000 mg/L/3h (OECD 209).
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 8 of 12
Contaminated packaging
Recommendation: Waste key number 150102: Plastic container
Waste key number 150104: Packages of metal
Empty carefully and completely, if possible.
Dispose of waste according to applicable legislation.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 9 of 12
15. Regulatory information
National regulations – U.S. Federal Regulations
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-
oxabicyclo[4.1.0]heptane-3-carboxylate:
TSCA Inventory: listed
TSCA HPVC: not listed
Styrene: TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 2B
OSHA Carcinogen: not listed
NTP Rating: listed
Clean Air Act:
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Clean Water Act:
Hazardous Substances: RQ 1000 lbs.
Other Environmental Laws:
CERCLA: RQ 1000 lbs.
RCRA Groundwater Monitoring: Methods 8020, 8240
/ PQL 1, 5
SARA Title III Section 313, Toxic Release: Conc.
0.1% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0571
Methyl methacrylate: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
TSCA: listed – Flags: T
Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Clean Air Act:
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Clean Water Act:
Hazardous Substances: RQ 1000 lbs.
Other Environmental Laws:
CERCLA: RQ 1000 lbs.
RCRA Hazardous Wastes: Code U162
RCRA Groundwater Monitoring: Methods 8015, 8240
/ PQL 2, 5
SARA Title III Section 313, Toxic Release: Conc.
1.0% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0426
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 10 of 12
1,3-Butadiene: TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 1
OSHA Carcinogen: listed
NTP Rating: listed
Clean Air Act:
Accidental Release Prevention: Threshold 10000 lbs.
/ Basis for listing = f
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Other Environmental Laws:
CERCLA: RQ 10 lbs.
SARA Title III Section 313, Toxic Release: Conc.
0.1% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0067
Acrylonitrile: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 2B
OSHA Carcinogen: listed
NTP Rating: listed
Clean Air Act:
Accidental Release Prevention: Threshold 20000 lbs.
/ Basis for listing = b
Hazardous Air Pollutants: Code XOV
SOCMI Chemical: yes
Clean Water Act:
Hazardous Substances: RQ 100 lbs.
Priority Pollutant: yes
Other Environmental Laws:
CERCLA: RQ 100 lbs.
RCRA Hazardous Wastes: Code U009
RCRA Groundwater Monitoring: Methods 8030, 8240
/ PQL 5, 5
SARA Title III Section 302, EHS: TPQ 10000 lbs. /
RQ 100 lbs.
SARA Title III Section 313, Toxic Release: Conc.
0.1% / Threshold Standard
NIOSH Recommendations:
Occupational Health Guideline: 0014
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 11 of 12
National regulations – U.S. State Regulations
Styrene: Delaware Air Quality Management List:
DRQ: 1000 – RQ State: Federal Regulations Apply
Idaho Air Pollutant List:
Title 585 — AAC: 1 — EL: 6.67 — WEL: – Title 586 –
Maine Hazardous Air Pollutants:
Me 2005: HAP – Hap Rpt: 2000
Massachusetts Haz. Substance codes: 1,2,4,5,6,9 *E*C* F7 F8
Michigan Critical Material:
Note: 2 – CMR#: 27 – Parameter#: 00100-42-5 – Annual Usage Parameter: 100
Minnesota Haz. Substance:
Codes: ANO — Ratings: 9.63 — Status: Air Pollutant. Carcinogen. Title III. TRI.
New Jersey RTK Hazardous Substance:
DOT 2055 – Sub No.: 1748 – TPQ: –
New York List of Hazardous Substances:
RQ — Air: 1000 – RQ — Land: 1 – Note: No Note Associated with this chemical.
Pennsylvania Haz. Substance code: E
Washington Air Contaminant:
TWA: 50 ppm / 215 mg — STEL: 100 ppm / 425 mg
California Proposition 65: cancer
Methyl methacrylate:Delaware Air Quality Management List:
DRQ: 1000 – RQ State: Federal Regulations Apply
Idaho Air Pollutant List:
Title 585; AAC: 20,5 – EL: 27,3 – OEL: 410 – Title 586: –
Massachusetts Haz. Substance Codes: 2,4,5,6 F8 F9
Main: HAP – 2000
Minnesota Haz. Substance:
Codes: AO – Ratings: 3.79 – Status: Air Pollutant. Title III. TRI.
New Jersey RTK Hazardous Substance:
DOT: 1247 – Sub No.: 1277
New York List of Hazardous Substances:
RQ-Air: 1000 – RQ-Land: 1
No Note Associated with this chemical
Pennsylvania Haz. Substance Code: E
Washington Air Contaminant: TWA: 100 ppm = 410 mg
1,3-Butadiene: California Proposition 65: cancer
Acrylonitrile: California Proposition 65: cancer
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Text for labeling: Contains >= 70 %
7-Oxabicyclo[4.1.0]hept-3-ylmethyl-7-oxabicyclo[4.1.0]heptane-3-carboxylate. Safety
data sheet available on request.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3A
Material number 1070
Revision date: 9/4/2018
Version: 7
Language: en-US
Date of first version:4/22/2010
Page: 12 of 12
Hazard rating systems:
1
20
NFPA Hazard Rating:
Health: 2 (Moderate)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 2 (Moderate)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Reason of change: Changes in section 1: Company/undertaking identification
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Toolfusion 3B
Relevant identified uses of the substance or mixture and uses advised against
General use: Modified Anhydride Curing Agent.
For industrial purposes only.
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: liquid
Color: colorless, clear
Odor: characteristic
Classification: Eye Damage – Category 1; Respiratory Sensitizer – Category 1; Sensitization – skin –
Category 1;
Hazard symbols:
Signal word: Danger
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 2 of 7
Hazard statements:
May cause an allergic skin reaction.
Causes serious eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements:
Avoid breathing vapors.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection.
[In case of inadequate ventilation] wear respiratory protection.
IF ON SKIN: Wash with plenty of water/soap.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Immediately call a POISON CENTER/doctor.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation or rash occurs: Get medical advice/attention.
If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
Take off contaminated clothing and wash it before reuse.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
see section 11: Toxicological information
3. Composition / Information on ingredients
Relevant ingredients:
CAS No. Designation Content Classification
CAS
19438-60-9
Hexahydro-4-
methylphthalic
anhydride
97.8 – 100 % Eye Damage – Category 1.
Respiratory Sensitizer – Category 1.
Sensitization – skin – Category 1.
4. First aid measures
In case of inhalation:Move victim to fresh air; if necessary, provide artificial respiration or oxygen. Seek
medical attention.
Following skin contact:Immediately clean with water and soap followed by thorough rinsing. Take off
immediately all contaminated clothing and wash it before reuse. In case of skin irritation,
consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Subsequently seek the immediate attention of an ophthalmologist.
After swallowing: Rinse mouth with water. Do not induce vomiting.
Give affected person large quantities of water, better milk. Seek medical attention.
Never give anything by mouth to an unconscious person.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Causes serious eye damage.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 3 of 7
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
230 F (Hexahydro-4-methylphthalic anhydride)
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, foam, dry chemical powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
Emits toxic fumes under fire conditions.
In case of fire may be liberated: hydrocarbons, carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Heating causes rise in pressure with risk of bursting. Cool
endangered containers with water spray and, if possible, remove from danger zone. Fight
fire from a safe distance. Stay upwind/keep distance from source.
6. Accidental release measures
Personal precautions:Provide adequate ventilation. Avoid contact with skin, eyes, and clothing. Do not breathe
vapor or spray. Wear appropriate protective equipment.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal
binding agents) and place in closed containers for disposal.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid contact with skin, eyes,
and clothing. Do not breathe vapor or spray. Wear appropriate protective equipment.
When using do not eat, drink or smoke. Wash hands before breaks and after work.
Precautions against fire and explosion:
Keep away from heat sources, sparks and open flames.
Storage
Requirements for storerooms and containers:
Keep container tightly closed in a cool, well-ventilated place. Keep container dry.
Do not drop, drag or bang the container. Protect from frost. Protect against direct sunlight.
Hints on joint storage:Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 4 of 7
8. Exposure controls / personal protection
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protectionTightly sealed goggles according to OSHA Standard – 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection Wear suitable protective clothing.
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: Rubber.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:When vapors form, use respiratory protection.
Use filter type A (= against vapors of organic substances) according to OSHA Standard –
29 CFR: 1910.134 or ANSI Z88.2.
General hygiene considerations:
Avoid contact with skin, eyes, and clothing. Do not breathe vapor or spray. Work place
should be equipped with a shower and an eye rinsing apparatus. When using do not eat,
drink or smoke. Wash hands before breaks and after work.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: liquid
Color: colorless, clear
Odor: characteristic
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: 230 F (Hexahydro-4-methylphthalic anhydride)
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: 5.7 hPa
Vapor density: No data available
Density: 1.16 g/mL
Water solubility: Contact with water liberates acid.
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Viscosity, kinematic: 90 – 110 mPa*s
Solid content: >= 99 %
10. Stability and reactivity
Reactivity: Contact with water liberates acid.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 5 of 7
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
Hazardous polymerisation: Will not occur.
Conditions to avoid:Excessive heating, humidity. Keep away from heat sources, sparks and open flames.
Avoid the formation of aerosol/vapors.
Incompatible materials:Avoid contact with strong oxidizing agents and Water .
Hazardous decomposition products:
In case of fire may be liberated: hydrocarbons, carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Eye Damage – Category 1 = Causes serious eye damage.
Sensitisation to the respiratory tract: Respiratory Sensitizer –
Category 1 = May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Symptoms
In case of inhalation:
Symptoms: Tickel in the throat, cough, wheezing, shortness of breath.
After contact with skin: Upon direct contact with skin may cause itching and redness.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 6 of 7
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Contaminated packaging
Recommendation: Waste key number 150102 – Plastic packaging
Waste key number 150104 – Metallic packaging
Dispose of waste according to applicable legislation.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Hexahydro-4-methylphthalic anhydride:TSCA Inventory: listed
TSCA HPVC: not listed
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Text for labeling: Contains 97.8 – 100 % Hexahydro-4-methylphthalic anhydride. Safety data sheet
available on request.
Hazard rating systems:
1
21
NFPA Hazard Rating:
Health: 2 (Moderate)
Fire: 1 (Slight)
Reactivity: 1 (Slight)
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 1
X
HMIS Version III Rating:
Health: 2 (Moderate)
Flammability: 1 (Slight)
Physical Hazard: 1 (Slight)
Personal Protection: X = Consult your supervisor
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Toolfusion 3B
Material number 1071
Revision date: 9/4/2018
Version: 8
Language: en-US
Date of first version:4/23/2010
Page: 7 of 7
Reason of change: Changes in section 1: Company/undertaking identification
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Pressure Sensitive Tapes
Teflease MG2, MG2R, MG2A, MG2E Yellow, MG2 Orange, Wrightlease 2, 2R,
Wrighlease 4, Toolwright 3, 5, Tooltec A005, A007, A012, Tooltec CS5, CA5, TFG—AH
series
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Pressure sensitive tape
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and WHMIS in Canada.
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of
fumes from burning or heating may cause polymer fume fever, a temporary flu-like illness
with fever and chills. Processing, e.g. by cutting, sawing or grinding, can produce
particles and dust. Avoid inhalation of dusts, as even inert dusts may functionally affect
respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Pressure sensitive tape
Carrier type: PTFE, PTFE/Glass, cloth, fluoropolymer
Adhesive type: Silicone, rubber or acrylic
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with
fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort,
shortage of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear
after 2 hours and decline within the next 36 to 48 hours. In case of prolonged exposure:
Possible danger of damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 3 of 8
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
Toxic fumes may be emitted at elevated temperatures. (> 380 C)
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon
monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid inhalation and contact with skin and eyes. Wear
appropriate protective equipment. Keep unprotected people away. When using do not eat,
drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Store at room
temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 4 of 8
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 5 of 8
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon
monoxide and carbon dioxide.
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 6 of 8
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures.
Hazardous decomposition products:
Hydrogen fluoride, Hexafluoropropene, Carbonyl difluoride,
Symptoms
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with
fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort,
shortage of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear
after 2 hours and decline within the next 36 to 48 hours. In case of prolonged exposure:
Possible danger of damage to liver and kidneys.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 7 of 8
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in
the same way as the substance itself. Non-contaminated packages may be recycled. Do
not remove label until container is thoroughly cleaned.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1092
Revision date: 9/13/2019
Version: 5
Language: en-US
Date of first version:7/27/2015
Page: 8 of 8
Reason of change: Changes in section 1: Changes of product list Changes in section 1:
Company/undertaking identification
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards
connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
