by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet SECURLON L-500Y
Economical multi-layer vacuum bagging film
lM DESCRIPTION
Securlon L-500Y vacuum bag is a wide multi-layer extruded film providing multiple layers of safety. These layers
reduce the concerns for “pinholes”, weak spots, brittleness and inconsistency in films. It is strong, has a high
elongation and is suitable for cure temperature up to 171 C (340 F). Securlon L-500Y is not recommended for
autoclave applications.
M@ BENEFITS
+ Wide films save time and money spent seaming film for large parts.
+ Wider films reduce risk of scrap parts due to leakage at seams.
+ Reduce scrap risk due to vacuum loss with multi-layered vacuum security.
@ TECHNICAL DATA
Test method
Material type Nylon, multi-layer
Elongation at break 380% ASTM D 882
Tensile strength 40 MPa (5800 psi) ASTM D 882
Maximum use temperature 171 C (340 F)
Flammability (self extinguishing) No ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Colour Yellow
Recommended Storage temperature is 5 C to 40 C (41 F to 104 F)at no less
Storage than 25% relative humidity. Store indoors in original packaging, do not stack
rolls on end.
Optimal usage conditions are in a Relative Humidity range from 50% to
User 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining
9 soft at higher %rh and at risk of become stiffer in low %rh, see “Hydrate
bagging films” TDS.
@ SIZES
Forms Available*
50 um (0.002 inch) up to 8.00 m (315 inches) SHT (Folded), CF, LFT, GT, G
63.5 um (0.0025 inch) up to 8.00 m (315 inches) SHT (Folded), CF, LFT, GT, G
75 tum (0.003 inch) up to 7.62 m (300 inches) SHT (Folded), CF, LFT, GT, G
+ For more sizes, see the Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
+ Form availability varies by size. Folded Centerfold (F-CF) format may be used on some sizes.
*SHT=Sheeting CF =Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
Mi SUSTAINABILITY
Contains Oe
can b ey Le Recyclable
> CD EE. YS veces
M@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the “Media Center” on our website.
Last updated : 2025-02-05
Catalog position : Bagging films
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet SECURLON L-1000 & L-2000
High vacuum security high strength vacuum bag
lM DESCRIPTION
Securlon vacuum bag films are multi-layer extruded films providing multiple layers of safety. These layers reduce the
concerns for “pinholes”, weak spots, brittleness and inconsistency in films. It is strong, has a high elongation
capability. Securlon vacuum bag film is the most secure nylon film made for high value laminate constructions.
Securlon L-1000 has temperature resistance up to 204 C (400 F), Securlon L-2000 has temperature resistance up to
218 C (425 F).
M@ BENEFITS
+ Reduce scrap risk with multi-layered vacuum security against defects.
+ Part quality and consistency improves with better pressure application.
+ Super strength and reliable multi-layer construction reduces bag failure costs, safeguarding expensive parts.
@ TECHNICAL DATA
Securlon L-1000 Securlon L-2000 Test method
Material type Nylon, multi-layer Nylon, multi-layer
Elongation at break 500 % 450% ASTM D 882
Tensile strength 82 MPa (12000 psi) 62 MPa (9000 psi) ASTM D 882
Maximum use temperature 204 C (400 F) 218 C (425 F)
Flammability (self
extinguishing) Yes Yes ATP-5034
Materials to avoid chenolic resins / Strong oxidizers
trong oxidizers
Colour Purple Blue
Cromael Recommended Storage temperature is 5 C to 40 C (41 F to 104 F)at no less than 25%
9 relative humidity. Store indoors in original packaging, do not stack rolls on end.
Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon
Usage based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at
risk of become stiffer in low %rh, see “Hydrate bagging films” TDS.
@ SIZES
pT thickness | idth | Fors Available
Securlon L-1000 50 um (0.002 inch) up to 7.11 m (280 inches) SHT, CF, LFT
Securlon L-2000 50 um (0.002 inch) up to 4.57 m (180 inches) SHT, CF, LFT
75 ym (0.003 inch) up to 4.57 m (180 inches) SHT, CF, LFT
+ For more sizes, see the Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF =Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
Mi SUSTAINABILITY
recycled 4 packaging
M@ NOTES
+ Securlon L-2000 is available embossed for compaction applications.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is
process specific, Airtech recommends testing prior to use.
Last updated : 2025-02-05
Catalog position : Bagging films
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet IPPLON DP1000 & KM1300
Soft nylon film with an excellent elongation
lM DESCRIPTION
Ipplon DP1000 & Ipplon KM1300 are vacuum bagging films with a high elongation and are suitable for cure
temperatures up to 212 C (414 F). They are recommended for bagging applications where a higher softness is
required.
@ BENEFITS
+ Softness and high elongation make bagging easier and faster to complete, reducing labour cost.
+ Wider film means less seams for safer high temperature cures of large parts in shorter cycle times.
+ High elongation reduces bridging and rework due to resin rich corners.
M@ TECHNICAL DATA
Ipplon DP1000 Ipplon KM1300 Test method
Material type Nylon Nylon
Elongation at break 450% 450% ASTM D 882
Tensile strength 48 MPa (7000 psi) 48 MPa (7000 psi) ASTM D 882
Maximum use temperature 212 C (414 F) 212 C (414 F)
Flammability (self
extinguishing) Yes Yes ATP-5034
4 a Phenolic resins / Phenolic resins /
Materials to avoid Strong oxidizers Strong oxidizers
Colour Salmon pink Pink
Saar Recommended Storage temperature is 5 C to 40 C (41 F to 104 F)at no less than 25%
9 relative humidity. Store indoors in original packaging, do not stack rolls on end.
Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon
Usage based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at
risk of become stiffer in low %rh, see “Hydrate bagging films” TDS.
SIZES
Thickness Width Forms avalable
Ipplon DP1000 50 um (0.002 inch) up to 9.00 m (354 inches) SHT, CF, LFT
75 tum (0.003 inch) up to 9.00 m (354 inches) SHT, CF, LFT
Ipplon KM1300 50 um (0.002 inch) up to 9.00 m (354 inches) SHT, CF, LFT, GT, G
75 tum (0.003 inch) up to 9.00 m (354 inches) SHT, CF, LFT, GT, G
+ For more sizes, see the Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
Mi SUSTAINABILITY
Contains
can b ~ Le Recyclable
Wz: CEE. YS wecene
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2025-02-05
Catalog position : Bagging films
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
“| lan Huntington Beach Fax: +1 714-899-8179 Website : wwwairtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet IPPLON KM1300
Soft nylon film with a high elongation
Hi sCDESCRIPTION
Ipplon KM1300 is a vacuum bagging film with a good elongation and is suitable for cure temperatures up to
414 F (212 C). It is recommended for bagging applications where a higher softness is required. An excellent film
for autoclave use or resin infusion.
BENEFITS
+ Softness and good elongation makes bagging easier and faster to complete, reducing labor cost.
+ Wider film means fewer seams for safer high temperature cures of large parts in shorter cycle times.
+ Good elongation reduces bridging in corners and so less rework due to resin rich corners.
HM TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 450% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 414 F (212 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Pink
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 354 inches (9.00 m) SHT,CF,LFT,GT,G
0.003 inch (75 ym) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
HM NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films oo"
the condtons or methods of we ncn stage, ae beyond or enrol. Ach nto In doc tse ay pony fr the pefomanc fis mater any pra we The mite sold"
sinechnteratont nc daca sn buyer wanes a andl lpg wares cud vathot imate the pes wanes of mechareay sae Restor parece The bleraton cotaned hen
ees pel opis and shoul ob ned ction pons By ans poe You convene ny The tial gigs Egham USK
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet IPPLON KM1300
Soft nylon film with a high elongation
DESCRIPTION
Ipplon KM1300 is a vacuum bagging film with a good elongation and is suitable for cure temperatures up to
414 F (212 C). It is recommended for bagging applications where a higher softness is required. An excellent film
for autoclave use or resin infusion.
@ BENEFITS
+ Softness and good elongation makes bagging easier and faster to complete, reducing labor cost.
+ Wider film means fewer seams for safer high temperature cures of large parts in shorter cycle times.
+ Good elongation reduces bridging in corners and so less rework due to resin rich corners.
@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 450 % ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 414 F (212 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Pink
” Unlimited when stored in original
Bbeliife packaging at 72 F (22 C)
@ SIZES
Forms Available*
0.002 inch (50 um) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
0.003 inch (75 um) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet IPPLON KM1300
Soft nylon film with a high elongation
DESCRIPTION
Ipplon KM1300 is a vacuum bagging film with a good elongation and is suitable for cure temperatures up to
414 F (212 C). It is recommended for bagging applications where a higher softness is required. An excellent film
for autoclave use or resin infusion.
@ BENEFITS
+ Softness and good elongation makes bagging easier and faster to complete, reducing labor cost.
+ Wider film means fewer seams for safer high temperature cures of large parts in shorter cycle times.
+ Good elongation reduces bridging in corners and so less rework due to resin rich corners.
@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 450 % ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 414 F (212 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Pink
” Unlimited when stored in original
Bbeliife packaging at 72 F (22 C)
@ SIZES
Forms Available*
0.002 inch (50 um) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
0.003 inch (75 um) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet IPPLON KM1300
Soft nylon film with a high elongation
DESCRIPTION
Ipplon KM1300 is a vacuum bagging film with a good elongation and is suitable for cure temperatures up to
414 F (212 C). It is recommended for bagging applications where a higher softness is required. An excellent film
for autoclave use or resin infusion.
@ BENEFITS
+ Softness and good elongation makes bagging easier and faster to complete, reducing labor cost.
+ Wider film means fewer seams for safer high temperature cures of large parts in shorter cycle times.
+ Good elongation reduces bridging in corners and so less rework due to resin rich corners.
@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 450 % ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 414 F (212 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Pink
” Unlimited when stored in original
Bbeliife packaging at 72 F (22 C)
@ SIZES
Forms Available*
0.002 inch (50 um) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
0.003 inch (75 um) up to 354 inches (9.00 m) SHT, CF, LFT, GT, G
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2020-05-26
Catalog position : Bagging films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altech ternational nc does ot sme any espns fe the performance of his material fo any parca ue. The mater is sld"s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
Huntington Beach Fax : +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet FLOWRUNNER KF160
Mesh wrapped spiral resin feed
DESCRIPTION
FlowRunner KF160 is a sewn tubular Knitflow 160 mesh with 1/2″ or 3/4″ spiral tube inserted for resin infusion
applications.
@ TECHNICAL DATA
Material type HDPE
Color Orange
Configuration of net Knitted
Maximum use temperature 250 F (121 C)
Mesh weight 4.7 oz/yd? (160 g/m )
@ SIZES
FlowRunner KF160-12 1/2 inch (12 mm) 4 inches (100 mm) 82 feet (25 m)
FlowRunner KF 160-34 3/4 inch (19 mm) 4 inches (100 mm) 82 feet (25 m)
_ a.
@ NOTES
+ The FlowRunner KF 160 is sold with spiral tube inserted.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2022-03-31
Catalog position : Resin infusion products 7
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. des not ese ay regan othe performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
TECHNICAL DATA SHEET
IMPRESSION SET V
PRE-FIT VERIFICATION FILM
IMPRESSION SET V
Pre-fit verification film
Ideal for taking and setting the imprint of metallic and non-metallic details
Features and Benefits
e Impression Set V is a multi-purpose, 0.012in Can be applied to sub-assemblies to stimulate a bond
(0.3mm) thick, fluorescent, vinyl-based film line or mating joint, and will take on the same
specifically formulated to take and set the imprint of configuration as the simulated bond line or mating
metallic and non-metallic details during the pre-fit of surfaces.
can Ta ae Ce * The Impression Set V can then be inspected to
Z determine if additional steps need to be taken to
Intended to be used where other pre-fit inspections ensure proper bond lines or fitting.
cannot be accomplished or easily verified. ore
e Impression Set V can be processed at
temperatures from 65 to 93 C (150 to 200 F), and
minimal pressure will provide adequate imprints for
analysis.
PROPERTIES
Maximum use temperature 93 C 200 F
Softening point 150 F
Color Fluorescent red
Film Vinyl based
Tensile strength 24.8MPa 3600psi
Elongation (at break) 250%
AVAILABILITY
Thicknesses 0.3mm 0.012in
Standard width 1.5tyd
Standard length 50yd
Other colors and thicknesses may be available
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered fo be
representative of the product described. Solvay does nol express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy,
the completeness or the relevance of the data and information set out herein. Because the properties of this product can he significantly affected by the
fabrication and testing techniques employed, and since Solvay docs not control the conililions under which its products are tested and used, Solvay cannot
guarantee the properties provided will be obtained with olher processes and equipment. No guarantee or warranty (s provided if the product is adapted for a
specific use or purpose Solvay declines any liability with respect to the use made by any third party of the data and information contained herein. Solvay
hhas the right to change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 92017, Solvay. All
rights reserved
eee
Solvay
Composite Materials HQ
Alpharetta, GA 3005-3914 USA asking more from chemistry
03 July 2015
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS8171
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS8171_02.21_Issue1
VAC-PAK
HS8171
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
A clear green, heat stabilized blown nylon 6 film.
Excellent tensile strength and heat ageing
properties, having been successfully used at
pressures of 100PSI (6.9bar) and temperatures of up
to 204 C (400 F).
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 204 C 400 F
Color Clear green
Tensile strength at break (ASTM D882) 96MPa 14000PSI
Elongation at break (ASTM D882) 415%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 4.06m (open) Up to 460in (open)
Formats available Tube, sheet, V sheet
STORAGE
Vac-Pak HS8171 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
