08KM3721M_TDS.pdf

5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet IPPLON DP1000 & KM1300
Soft nylon film with an excellent elongation
lM DESCRIPTION
Ipplon DP1000 & Ipplon KM1300 are vacuum bagging films with a high elongation and are suitable for cure
temperatures up to 212 C (414 F). They are recommended for bagging applications where a higher softness is
required.
@ BENEFITS
+ Softness and high elongation make bagging easier and faster to complete, reducing labour cost.
+ Wider film means less seams for safer high temperature cures of large parts in shorter cycle times.
+ High elongation reduces bridging and rework due to resin rich corners.
M@ TECHNICAL DATA
Ipplon DP1000 Ipplon KM1300 Test method
Material type Nylon Nylon
Elongation at break 450% 450% ASTM D 882
Tensile strength 48 MPa (7000 psi) 48 MPa (7000 psi) ASTM D 882
Maximum use temperature 212 C (414 F) 212 C (414 F)
Flammability (self
extinguishing) Yes Yes ATP-5034
4 a Phenolic resins / Phenolic resins /
Materials to avoid Strong oxidizers Strong oxidizers
Colour Salmon pink Pink
Saar Recommended Storage temperature is 5 C to 40 C (41 F to 104 F)at no less than 25%
9 relative humidity. Store indoors in original packaging, do not stack rolls on end.
Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon
Usage based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at
risk of become stiffer in low %rh, see “Hydrate bagging films” TDS.
SIZES
Thickness Width Forms avalable
Ipplon DP1000 50 um (0.002 inch) up to 9.00 m (354 inches) SHT, CF, LFT
75 tum (0.003 inch) up to 9.00 m (354 inches) SHT, CF, LFT
Ipplon KM1300 50 um (0.002 inch) up to 9.00 m (354 inches) SHT, CF, LFT, GT, G
75 tum (0.003 inch) up to 9.00 m (354 inches) SHT, CF, LFT, GT, G
+ For more sizes, see the Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing Mi SUSTAINABILITY Contains can b ~ Le Recyclable Wz: CEE. YS wecene @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. Last updated : 2025-02-05 Catalog position : Bagging films ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n