by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2023-06-06
Catalog position : Bagging films a
Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold
itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen
represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2023-06-06
Catalog position : Bagging films a
Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold
itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen
represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2023-06-06
Catalog position : Bagging films a
Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold
itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen
represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 4600
Cost effective polyolefin copolymer release film
lM DESCRIPTION
Wrightlon 4600 release film is a low cost high temperature film for use in flat or limited curvature molding
applications up to 380 F (193 C). It will release from epoxy and phenolic resin systems. All standard perforations are
available. Please see our perforation table in this section.
@ BENEFITS
+ Inexpensive film reduces the cost of high temperature vacuum bagging process.
+ Flat film can be applied quickly and without wrinkles over simple tooling and part shapes.
+ Highly visible colour reduces risk of leaving film on cured parts.
M@ TECHNICAL DATA
Test method
Material type PMP.
Elongation at break 250% ASTM D 882
Tensile strength 3400 psi (23 MPa) ASTM D 882
Maximum use temperature 193 C (380 F)
Materials to avoid Polyester and vinyl ester resins
Colour Blue/Clear
Shelf life Unlimited when stored in original packaging at 22 C (72 F)
SIZES
Forms Available
0.0015 inch (38 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 54 inches (1.37 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2024-05-22
Catalog position : Release films
ste conditions ceo ue nding sarge beyond ot cota itech tration oe ese pony for the peronnnce fh mate fr ry arr. The mates sols Artech inten ne 4
