by | Sep 27, 2025
Technical Data Sheet
Propylene Carbonate
Property Units Limits Results Method
Purity % 99.5 min
Appearance
Color 16 max
PH
Water % 0.05 max
Specific Gravity @
20C
g/cm3 1.203 +/- 0.005
Disclaimer: These specifications represent the quality of our product in general
and may vary from batch to batch and producer to producer. If you are looking
for particular specifications please call our office or email your representative.
Shell Oil and Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com
by | Sep 27, 2025
Technical
Data SheetA Walker Industries Company
Marathon Tool Wash 132
Marathon Tool Wash 132is a highly effective emulsion cleaner used to remove a broad spectrum of industrial soils
including petroleum-based oils and greases as well as inks, uncured paints and lacquers, and silica (dirt) deposits.
Typical applications for Marathon Tool Wash 132include general maintenance tasks, parts washers, cleaning shop
floors, machine tools and production soil removal using heated turbulator tanks, foam guns, pressure washers and
hand wipe-down. After cleaning and with only moderate rinsing, polished surfaces will generally be free of both
waterbreaks and hazy detergent films.
Product Description
Physical Properties
Non-flammable for ease of handling
Marathon Tool Wash 132is as effective at ambient temperatures as most products are when they are heated.
Because it is a water-base emulsion without the flammability hazards of conventional solvent-base cleaners,
Marathon Tool Wash 132can be safely heated to increase its performance even more. Economical to use –
concentrated and recyclable to last longer.
Economical to use -concentrated and recyclable to last longer.
Marathon Tool Wash 132is highly concentrated -dilute one volume with up to 10 volumes of water for use.
And to add to its economy, when properly filtered, Marathon Tool Wash 132can be reused up to three
times.
Tools come clean -with no sticky residues
The dissolving action of acetone or methylene chloride frequently leaves behind sticky surfaces. Marathon
Tool Wash 132works to settle out most of the residues to leave your tools clean and tack-free.
Water-base formulation more environmentally sound than conventional solvents
Marathon Tool Wash 132contains no ozone-depleting chemicals and does not qualify as a hazardous waste
under current RCRA regulations. Dispose of wastes and spills, in conjunction with federal, state and local laws
governing non-hazardous materials.
Features and Benefits
Technical
Data SheetA Walker Industries Company
Provides excellent performance over broad range of water hardness
Marathon Tool Wash 132controls hardwater ions which could otherwise interfere in the suspension and
settling of resins.
Uses 3-way chemical action to prevent resins adhering to surfaces
Marathon Tool Wash 132breaks up uncured resins and temporarily prevents the cross-linking of uncured
resin molecules, then slows the action of catalysts so resins can be removed before they cure on unwanted
surfaces. The chemistry of Marathon Tool Wash 132helps make your job easier.
Features and Benefits
CLEANING TOOLS AND EQUIPMENT (rollers, brushes, etc.)
Mix one volumeMarathon Tool Wash 132with 10 volumes water. Although hot water is not required -Marathon
Tool Wash 132works as well cold as most products work when heated -it cleans even more effectively at tempera-
tures of 104 -107 F. Simply immerse your fixed brushes and metal and plastic rollers in the cleaning solution.
Either manual agitation or automated brush and tool cleaning equipment can then be used to loosen residues from
tool surfaces. With some resins and with more advanced gel states, more vigorous agitation may be necessary.
After cleaning, rinse toolsin clean water to remove residual Marathon Tool Wash 132 and clinging sediments. Use
compressed air to remove the rinse water then complete the drying process on a drying rack or with water-absorbing
solvent.
GUN FLUSHING
Marathon Tool Wash 132has been tested with great success by Venus-Gusmer, a leading manufacturer of resin
application systems. Best results are achieved using one volume Marathon Tool Wash 132diluted with five volumes
water. Flush guns with the solution, introducing air into the line while flushing if possible. Rinse with water if the gun
is to be out of service for more than eight hours. Be sure to purge any residual water from the tip of the gun before
spraying resin and chop on a part.
Application
After hardening and air-drying, the separated resins need to be disposed in accordance with local regulations. Those
resins that remain in a pasty state can be mixed with catalyzed resin and hardened for disposal or subsequent use.
Commercial evaporators can be used to economically dispose of 50 to 1000 gallons per day of spent liquid cleaning
solution. Contact air quality regulators for the necessary permits.
In some instances, the spent Marathon Tool Wash 132solution can be discarded in the sanitary sewer system.
Before discharging spent solution into the sanitary sewer, local authorities must be contacted for approval.
Waste Disposal
Before using this product, please read the Safety Data Sheet NumberforMarathon Tool Wash 132and follow the
recommended safety instructions.
Additional Notes
Technical
Data SheetA Walker Industries Company
Products and information are intended for use by persons having skill and knowledge in the industry at their own discretion and risk. Product Bulletins are intended to provide general information
on Walker Emulsions products and should not be construed as guaranteeing specific properties of the product described or suitability for a particular application. Users cannot anticipate all
conditions under which our products, or the products of other manufacturers are combined, stored or may be used. Users are advised to make their own tests to determine suitability. Unless
otherwise agreed to in writing, Walker Emulsions products are sold without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and
use of our products, whether used alone or in combination with other products.
Disclaimer
www.walkerind.com
Walker Emulsions Limited
4365 Corporate Drive
Burlington, ON, CAN L7L 5P7
905-336-1216
888-636-1216
Walker Emulsions Inc.
4401 SE Johnson Creek Blvd
Portland, OR, USA 97222
503-659-1708
800-554-4666
Walker Emulsions (USA) Inc.
700 Prosperity Drive
Orangeburg, SC, USA 29115
803-585-0149
855-229-9242
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLEASE
Extruded fluoropolymer pressure sensitive tape
DESCRIPTION
Wrightlease is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. The orange
color is highly visible on most substrates in addition to offering high elongation and tensile strength.
@ BENEFITS
+ Provides excellent release from all common resin systems for multiple releases.
+ Good adhesion to metal, composite, tooling block and rubber tooling.
+ High elongation allows for easier covering of complex contour surfaces.
@ TECHNICAL DATA
Technical Data Wrightlease 2 Wrightlease 4
Maximum use temperature 500 F (260 C) 500 F (260 C)
Carrier type Extruded fluoropolymer Extruded fluoropolymer
Adhesive type Silicone Silicone
Color Orange Orange
Total thickness 0.0035 inch (88 1m) 0.0055 inch (138 tm)
Film thickness 0.002 inch (50 um) 0.004 inch (100 ym)
Adhesive thickness 0.0015 inch (38 ym) 0.0015 inch (38 ym)
Elongation at break 350% 350%
M@ SHELF LIFE
18 months from date of shipment when stored in original packaging at 72 F (22 C)
COMMONLY USED SIZES
1 inch (2.54 cm) 36 yards (33 m) 48 rolls per case
2 inches (5.08 cm) 36 yards (33 m) 24 rolls per case
+ Broken cases and other widths available on special order.
@ NOTES
+ Available in 1 in x 2 in (2.54 cm x 5.08 cm) “cut strips” on a liner.
+ For requirements wider than 4 inches (10.16 cm), it is recommended to use Toolwright 3 product which
has a release liner so it can be easily unwound from the roll without distortion.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use. Last updated : 2023-06-28
Catalog position : Pressure sensitive tapes
the conditions or methods fuse Inching storage, ae beyond out contol Artech Intemational does not ese ay regan othe performance of material fo any para we Te mate soda
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
epresets tpl proper and hod nob aed fo specication pupose Ary vansation povided fr Your camvelecs on. me oil anuage Engi an he oficial Calf, USK
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLEASE
Extruded fluoropolymer pressure sensitive tape
lM DESCRIPTION
Wrightlease is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. The orange colour is
highly visible on most substrates in addition to offering high elongation and tensile strength.
@ BENEFITS
+ Provides excellent release from all common resin systems for multiple releases.
+ Good adhesion to metal, composite, tooling block and rubber tooling.
+ High elongation allows for easier covering of complex contour surfaces.
M@ TECHNICAL DATA
Wrightlease 2 Wrightlease 2R Wrightlease 4
Maximum use temperature 260 C (500 F) 204 C (400 F) 260 C (500 F)
Carrier type Extruded fluoropolymer Extruded fluoropolymer Extruded fluoropolymer
Adhesive type Silicone Rubber Silicone
Elongation at break 350% 300 % 350%
Light orange substrate
Coleen Cenge Green or white adhesive Crag
Total thickness 88 ym (0.0035 inch) 88 um (0.0035 inch) 138 tm (0.0055 inch)
Film thickness 50 ym (0.002 inch) 50 um (0.002 inch) 100 tm (0.004 inch)
Adhesive thickness 38 um (0.0015 inch) 38 um (0.0015 inch) 38 um (0.0015 inch)
Shelf life 18 months from date of shipment when stored in original
packaging at 22 C (72 F)
lM SIZES
Wrightlease 2 Wrightlease 2R Wrightlease 4
2.54 cm – 33 m (1 – 36 yards) 2.54 cm – 33 m (1 – 36 yards) 2.54 cm – 33 m (1″ – 36 yards)
48 rolls/case 48 rolls/case 48 rolls/case
5.08 cm – 33 m (2″ – 36 yards) 5.08 cm – 33 m (2″ – 36 yards) 5.08 cm – 33 m (2″ – 36 yards)
24 rolls/case 24 rolls/case 24 rolls/case
+ Available in 2.54 cm 5.08 cm (1 – 2″) “cut strips” on a liner.
+ Broken cases and other widths available on special order.
SUSTAINABILITY
packaging
wy
M@ NOTES
+ For requirements wider than 10.16 cm (4″), it is recommended to use Toolwright 3 product which
has a release liner so it can be easily unwound from the roll without distortion.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is
process specific, Airtech recommends testing prior to use.
Last updated : 2025-02-07
Catalog position : Pressure sensitive tapes
ste contin creo ue nding sarge eyed ot conta itech trator doe tse pony for the pevomnance fh mae for ry arr. The mates sols Artech inteton n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 8400
Nylon vacuum bagging film
lM DESCRIPTION
Wrightlon 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven
performance. It is called out on many aerospace specifications for use temperatures up to 232 C (450 F). It is
recommended for cures with phenolic resins.
@ BENEFITS
+ Heat resistance provides vacuum security during high temperature cures of expensive parts.
+ Proven performance and approvals on specifications worldwide gained over more than 30 years.
+ High strength and chemical resistance reduces bag failures with aggressive phenolic resins.
M@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 350% ASTM D 882
Tensile strength 62 MPa (9000 psi) ASTM D 882
Maximum use temperature 232 C (450 F)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Strong oxidizers
Colour Blue
Recommended Storage temperature is 5 C to 40 C (41 F to 104 F) at no less
Storage than 25% relative humidity. Store indoors in original packaging, do not stack
rolls on end.
Optimal usage conditions are in a Relative Humidity range from 50% to
Users 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining
9 soft at higher %rh and at risk of become stiffer in low %rh, see “Hydrate
bagging films” TDS.
SIZES
Forms Avalable
50 um (0.002 inch) up to 3.66 m (144 inches) SHT, CF, LFT
75 um (0.003 inch) up to 4.57 m (180 inches) SHT, CF, LFT
+ For more sizes, see the Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
SUSTAINABILITY
Contains a>
can b N PS Recyclable
We: c ym) pan: eral QV packaging
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2025-04-15
Catalog position : Bagging films
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 8400
Nylon vacuum bagging film
lM DESCRIPTION
Wrightlon 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven
performance. It is called out on many aerospace specifications for use temperatures up to 450 F (232 C). It is
recommended for cures with phenolic resins.
@ BENEFITS
+ Heat resistance provides vacuum security during high temperature cures of expensive parts.
+ Proven performance and approvals on specifications worldwide gained over more than 30 years.
+ High strength and chemical resistance reduces bag failures with aggressive phenolic resins.
M@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 350% ASTM D 882
Tensile strength 9000 psi (62 MPa) ASTM D 882
Maximum use temperature 232 C (450 F)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Strong oxidizers
Colour Blue
P Unlimited when stored in original
Sallie packaging at 72 F (22 C)
@ SIZES
Forms Available
0.002 inch (50 ym) up to 144 inches (3.66 m) SHT, CF, LFT
0.003 inch (75 um) up to 180 inches (4.57 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
M@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2024-06-28
Catalog position : Bagging films 4
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n 4
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 8400
Nylon vacuum bagging film
lM DESCRIPTION
Wrightlon 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven
performance. It is called out on many aerospace specifications for use temperatures up to 450 F (232 C). It is
recommended for cures with phenolic resins.
@ BENEFITS
+ Heat resistance provides vacuum security during high temperature cures of expensive parts.
+ Proven performance and approvals on specifications worldwide gained over more than 30 years.
+ High strength and chemical resistance reduces bag failures with aggressive phenolic resins.
M@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 350% ASTM D 882
Tensile strength 9000 psi (62 MPa) ASTM D 882
Maximum use temperature 232 C (450 F)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Strong oxidizers
Colour Blue
P Unlimited when stored in original
Sallie packaging at 72 F (22 C)
@ SIZES
Forms Available
0.002 inch (50 ym) up to 144 inches (3.66 m) SHT, CF, LFT
0.003 inch (75 um) up to 180 inches (4.57 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
M@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2024-06-28
Catalog position : Bagging films 4
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n 4
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2023-06-06
Catalog position : Bagging films a
Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold
itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen
represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2023-06-06
Catalog position : Bagging films a
Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold
itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen
represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit
Open Edge
*SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted
Tubing Tubing
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Watch a video of Wide Films in the "Media Center" on our website.
Last updated : 2023-06-06
Catalog position : Bagging films a
Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold
itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen
represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA
