08ES60100_TDS.pdf

5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet ECONOSTITCH & ECONOSTITCH G
Non-coated peel ply with tracers
lM DESCRIPTION
Econostitch and Econostitch G are economical, heat set and scoured peel plies with tracers which make these peel
plies more visible before and after a cure, reducing the possibility of the peel ply being left on the part.
Our Econo peel plies are designed to work in resin infusion or hand lay-up processes. Econostitch and Econostitch G
assist or eliminate the need for sanding or abrading on your composite laminate.
M@ BENEFITS
+ Peel plies strip off of cured laminates leaving a textured surface, reducing time spent hand finishing.
+ Lower cost fabric reduces overall cost of vacuum bag process materials.
+ Pin stripes (tracers) make fabric more visible to reduce risk of leaving in place after cure.
TECHNICAL DATA
Econostitch Econostitch G
Maximum use temperature 190 C (375 F) 190 C (375 F)
Fibre type Nylon Polyester
Weight 88 g/m? (2.6 oz/yd ) 85 g/m? (2.5 oz/yd )
Thickness 0.152 mm (0.006 inch) 0.127 mm (0.005 inch)
Colour White White
Tracer Red Black or Red
Extractables <0.5 % by weight <0.5 % by weight Shelf life Unlimited when stored in original packaging at 22 C (72 F) SIZES pity bength | Packaging Econostitch 152 cm (60 inches) 274 m (300 yards) Troll Econostitch G 180 cm (71 inches) 200 m (218 yards) Troll M@ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity. + Econostitch is not recommended for use against phenolic resins. + Watch a demo video of Econostitch G in the "Media Center" on our website. Last updated : 2024-02-23 Catalog position : Release fabrics / Peel plies ste conditions ceo ue nding sarge beyond ot cota Altech tration oe ese pony for the peronnnce fh mae for ry arr. The mates sls Artech intetonl n 4