0860001SRBA_TDS.pdf

Cytec 1oft 60001
Process Materials Peel ply
Features
Porous, polyester peel ply. This product is particularly recommended for use with
Heat set and scoured, for use directly against phenolic resin systems.
laminates or bond lines. Also recommended for composite manufacture and
Available coated and non-coated, depending on user metal bonding applications.
requirement. Manufactured by Precision Fabrics Group (PFG).
Approved on a range of OEM specifications for
composite manufacture and metal bonding.
NAT = Scoured and heat set finish
10 – International Orange for easy identification
LP Very Low Porosity finish
SRB Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
Maximum use temperature | 204 C 400 F
Color Natural, blue and orange
Fabric type Polyester
Fabric weight 85g/m? 2.S02z/yd?
Standard width 1.52m 60in
Standard length 274m 300yd
Slit widths available
No special storage conditions required.
Handling of these products must conform to individual company guidelines and health and safety regulations.
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
21 March 2013