by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
i Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
y a ea CA92647 USA
INTERNATIONAL INC.
Data Sheet AIRFLOW 65R
The all purpose hose for composites, bonding and tool shops
DESCRIPTION
Airflow 65R can be used as an autoclave or oven hose. The outer ply is silicone rubber that encases a flexible steel
tube that prevents collapse and hose separation. The bell-shaped ferrule helps hose lacerations at fitting ends
extending hose life.
@ BENEFITS
+ Safer vacuum for part curing with heavy duty hose construction.
+ Flexibility make loading ovens and autoclaves easy and fast.
+ Straight and elbow end fittings help reduce strain on hose and vacuum bags.
M TECHNICAL DATA
Material type of inner tube Interlocking steel tube
Material type of hose Silicone rubber
Hose colour Green
End fitting 1/4 inch male NPT
Service temperature 232 C (450 F)
Max autoclave pressure 9 bar (130 psi)
SIZES
) Product Reference. |. Nominal Outer Hose Diameter Available Length
AIRFLOW 65R 19 mm (3/4 inch) up to 30 m (100 feet)
+ Though standard sizes are 3 m (10 feet), hose lengths can be customized to meet your specific
requirements, contact Airtech for more information.
1/4 in. male NPT straight end fittings on one or both ends.
oR
ns
z A
BlAri
1/4 in. male NPT 90 fixed end fittings on one or both ends.
Last updated : 2024-06-11
Catalog position : Vacuum valves and hoses
ste condion or metodo nig Hoge beynd ut canto tech nema cdot tae repeat fete proms th me ony parc we. Te tert Aste temo oe
cima wen anand al ple waa ndng wht ato henge wri of meando ee for parca The rmation crane sr yl opera dnt eed
petaton purpose Any taronk poet yu convener oy Tne ealungunge gn anh fel am Catena SA
by | Sep 27, 2025
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
ieee ener
POLYESTER PEEL / RELEASE PLY FABRIC
i POLYESTER PEEL / RELEASE PLY Code: 60002
| 4 : Style: 56030
Code: 60002 Style: 56030
Code 60002 is similar to 6000! except it contains black identifica-
| tion stripes for easy visibility. Code 60002 is designed for vacuum
bag lay-up composites and metal-to-metal bonding structures. Code
60002, 100% polyester fiber melts at approximately 480 F (249 C)
and is resistant to phenolic resin system degradation. The fabric
leaves a medium surface impression for priming and secondary
bonding. It is available in precision slit widths of 58 inches or less.
Code 60002 Peel Ply is available in:
FIN 060-NAT Scoured and Heat-Set finish
FIN 062-10 International Orange for easy identification
FIN 065- VLP Very Low Porosity finish
Code 60002 Release Ply is available in:
FIN 061-SRB Super Release Blue An inert, heat stabilized,
cross-linked polymer finish
6 ue Ta ee | FIN 060 – NAT
S FIN 061 – SRB |
|
| FIN 065 -VLP
, =
WY We believe the inf she bul Ny of TREET GREENSBORO, NC 27401 Pe
jeve the information in the bulletin is correct. No warranty of accuracy is . 510. all we reason
implied. The information is not to be construed as a specification or a license to 36-510-8000 + Fax 336-510-8003] [ We.
operate under, nor is it intended to suggest infringement of any existing patents. WWW.PRECISIONFABRICS.COM PERFORMANCE FABRICS DIVISION
by | Sep 27, 2025
TECHNICAL DATA SHEET
VAC-PAK HS6262
VACUUM BAGGING FILM
VAC-PAK HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
* Blue heat stabilized, blown nylon 6/6 film. + Excellent elongation and heat ageing characteristics,
Predominantly used in high temperature and wien used of Pressures of 10d st (6 Spat) end
pressure autoclave cures, and in the manufacture of Semperatures of up to 232.0 (250 cot several hows:
thermoplastics. * Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 12300PSI
Elongation at break (ASTM D882) 350%
Yield 50um: 17.30m2/kg 9.39y “/Ib
bad 75ym: 11.60m/kg 6.3yd/Ib
AVAILABILITY
Thickness 50 and 75ym [0.002 and 0.003in
Roll weight Up to 45kg [Up to 100Ibs
Widths Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
Aerovac
955-10 National Parkway
Schaumburg, IL 60173
USA
TOs VaHS6262_02.21 fsuet COMPOSITES ONE
by | Sep 27, 2025
TECHNICAL DATA SHEE T
60001
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS 60001_02 .21_Issue1
60001
Peel ply
Ideally suited to aerospace applications
Features and Benefits
Porous, polyester peel ply.
Heat set and scoured, for use directly against
laminates or bond lines.
Available coated and non- coated, depending on user
requirement.
Approved on a range of OEM specifications for
composite manufacture and metal bonding.
This product is particularly recommended for use with
phenolic resin systems.
Also recommended for composite manufacture and
metal bonding applications.
Manufactured by Precision Fabrics Group (PFG).
PRODUCT VARIANTS
NAT Scoured and heat set finish
IO International Orange for easy identification
VLP Very Low Porosity finish
SRB Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
PROPERTIES
Maximum use temperature 204 C 400 F
Color Natural, blue and orange
Fabric type Polyester
Fabric weight 85g/m 2.5oz/yd
AVAILABILITY
Standard width 1.52m 60in
Standard length 274m 300yd
Slit widths available
STORAGE
No special storage conditions required.
TECHNICAL DATA SHEE T
60001
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS 60001_02 .21_Issue1
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
