by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
60001
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS 60001_02 .21_Issue1
60001
Peel ply
Ideally suited to aerospace applications
Features and Benefits
Porous, polyester peel ply.
Heat set and scoured, for use directly against
laminates or bond lines.
Available coated and non- coated, depending on user
requirement.
Approved on a range of OEM specifications for
composite manufacture and metal bonding.
This product is particularly recommended for use with
phenolic resin systems.
Also recommended for composite manufacture and
metal bonding applications.
Manufactured by Precision Fabrics Group (PFG).
PRODUCT VARIANTS
NAT Scoured and heat set finish
IO International Orange for easy identification
VLP Very Low Porosity finish
SRB Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
PROPERTIES
Maximum use temperature 204 C 400 F
Color Natural, blue and orange
Fabric type Polyester
Fabric weight 85g/m 2.5oz/yd
AVAILABILITY
Standard width 1.52m 60in
Standard length 274m 300yd
Slit widths available
STORAGE
No special storage conditions required.
TECHNICAL DATA SHEE T
60001
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS 60001_02 .21_Issue1
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet A 575/ A 575 RC
Polyester shrink tape
DESCRIPTION
A575 high shrink tape is a flexible polyester tape. Ideal for mandrel wrapping aircraft tubular parts, golf shafts,
tennis rackets, fishing rods, etc.
A575 RC is coated with a non-silicone release agent for direct release. This eliminates the need for release films
or release fabrics used under A 575.
A575 and A 575 RC are available with the P3 perforation for evacuation of volatiles.
@ TECHNICAL DATA
Material type Polyester
Color Clear
Nominal shrinkage (lengthwise) at 300 F (149 C) 20%
Maximum shrink pressure (lengthwise) 2500 psi (17.2 MPa)
Starts to shrink 175 F (79 C)
Temperature range for practical use 200-400 F (93-204 C)
Approximate time to reach full shrink after exposure to temperature 10 minutes
Shelf Life 18 months from date of shipment
@ SIZES
0.002 inch (50 um) 0.75 inch (1.90 cm) 100 yards (91.4 m)
0.002 inch (50 um) 1.25 inches (3.17 cm) 100 yards (91.4 m)
0.002 inch (50 um) 2.5 inches (6.35 cm) 100 yards (91.4 m)
+ Other sizes available on special request.
wx 200 i 4 pony Release coat on
1500 i outer surface of
ee – roll
= epeniee. a a *Can be perforated
Fig. 1 Lengthwise shrinkage Fig. 2 Lengthwise contraction 7]
tape unrestrained force Tape fully restrained
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2018-10-19
Catalog position : Miscellaneous (
Aste condtlons or methods of use, Including storage, are beyond our contol, Altch Intemational Inc doesnot assume any responsibly fr the performance of his material for any pacar ue. Th mate old “3 Z4
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
_
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet A 575/ A 575 RC
Polyester shrink tape
DESCRIPTION
A575 high shrink tape is a flexible polyester tape. Ideal for mandrel wrapping aircraft tubular parts, golf shafts,
tennis rackets, fishing rods, etc.
A575 RC is coated with a non-silicone release agent for direct release. This eliminates the need for release films
or release fabrics used under A 575.
A575 and A 575 RC are available with the P3 perforation for evacuation of volatiles.
@ TECHNICAL DATA
Material type Polyester
Color Clear
Nominal shrinkage (lengthwise) at 300 F (149 C) 20%
Maximum shrink pressure (lengthwise) 2500 psi (17.2 MPa)
Starts to shrink 175 F (79 C)
Temperature range for practical use 200-400 F (93-204 C)
Approximate time to reach full shrink after exposure to temperature 10 minutes
Shelf Life 18 months from date of shipment
@ SIZES
0.002 inch (50 um) 0.75 inch (1.90 cm) 100 yards (91.4 m)
0.002 inch (50 um) 1.25 inches (3.17 cm) 100 yards (91.4 m)
0.002 inch (50 um) 2.5 inches (6.35 cm) 100 yards (91.4 m)
+ Other sizes available on special request.
wx 200 i 4 pony Release coat on
1500 i outer surface of
ee – roll
= epeniee. a a *Can be perforated
Fig. 1 Lengthwise shrinkage Fig. 2 Lengthwise contraction 7]
tape unrestrained force Tape fully restrained
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2018-10-19
Catalog position : Miscellaneous (
Aste condtlons or methods of use, Including storage, are beyond our contol, Altch Intemational Inc doesnot assume any responsibly fr the performance of his material for any pacar ue. Th mate old “3 Z4
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
_
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
