by | Sep 27, 2025
CHOMARAT Textiles Industries
39, avenue de Chabannes
07160 LE CHEYLARD France
t l. +33 (0)4 75 29 81 00
fax +33 (0)4 75 29 20 12
info@chomarat.com www.chomarat.com
siret : 50160786500018 TVA FR42501607865
Important: All properties are average values given for indication. Values are not intended for use as a specification. : Information given in this
document is based on the present knowledge of the technical properties of our product.
All information is believed to be accurate but is given without acceptance of liability. Users should make their own assessment of the suitability
of any product for the purposes required. Information contained in the present document refers to the product specifically indicated and cannot
be valid in combination with other products.
All sales are subject to our standard terms of sale which include limitations on liability and other important terms.
Important: Toutes les propri t s sont des valeurs moyennes donn es titre indicatif et ne peuvent tre utilis es comme sp cifications. Les
informations donn es dans cette fiche technique sont bas es sur l’ tat de nos connaissances actuelles Toutes ces informations sont
suppos es correctes mais donn es sans acceptation de responsabilit . Les utilisateurs doivent valuer le produit en fonction de l utilisation
qui doit en tre faite.
Les informations contenues dans le pr sent document se rapportent au produit sp cifiquement d sign et ne peuvent tre valables en
combinaison avec d’autres produits. Toutes les ventes sont soumises nos conditions g n rales de vente.
G-FLOW 500L
Date d’ mission
Issue date/Datumssendung
24.04.14
N FICHE TECHNIQUE : GFW 001
Data Sheet Number / Technische Daten Nummer
Indice de r vision Inspection Index
berhobungszahl
01 du 22.01.15
Poids/Weight/Gewicht 497 Gr/m + 5 %
Epaisseur indicative/Indicative Thickness/Indikative Dicke mm
COMPOSANTS /Components/Bauelemente
CHAINE/Warp/Kette 600 Tex 28 Tex
Mati re/Substance/Stoff VERRE / Glass /Glas POLYESTER/PES
Poids/Weight/Gewicht 240 g/m 17 g/m 257 Gr/m + 5 %
TRAME/Weft/Schuss 600 Tex
Mati re/Substance/Stoff VERRE / Glass /Glas
Poids/Weight/Gewicht 240 Gr/m + 5 %
ARMURE /Weave/Bindung Gaze / Leno weave
OBSERVATIONS
Observations/Bemerkungen
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet GREENFLOW 75
High performance, low profile resin distribution medium
DESCRIPTION
Greenflow 75 is designed to efficiently distribute resin with little waste due to the low profile, tight construction.
Greenflow 75 can be used with polyester, vinylester and epoxy resins.
@ TECHNICAL DATA
Material type Polypropylene
Color Green
Configuration of net Extruded (Rhombic)
Maximum use temperature 302 F (150 C)
Melt point 320 F (161 C)
Mesh weight 98 g/m?
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
0.03 in (0.9 mm) 41 in (1.04 m) 350 ft (106.7 m)
0.03 in (0.9 mm) 60 in (1.5 m) 350 ft (106.7 m)
@ NOTES
+ This product is an extruded mesh and does not fray when cut.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2021-01-21
Catalog position : Resin infusion products A
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. des not ese ay regan othe performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet FLOWSTRIP
Resin flow channel for infusion processes
lM DESCRIPTION
Flowstrip is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven
polyester sleeve. Flowstrip is an extremely efficient resin flow channel which is easy to position on infusion laminates
and vacuum bag.
@ BENEFITS
+ Good resin flow speeds for reduced infusion cost.
+ Easily stored, unrolled, cut and positioned in the mould for faster builds.
+ Lays flat for easy vacuum bagging and simple to connect to with Airtech infusion connectors.
@ TECHNICAL DATA
Material type PP mesh in polyester sleeve
Colour Grey
Maximum use temperature 155 C (311 F)
Materials to avoid Compatible with most resin systems
Shelf life Unlimited when stored in original packaging at 22 C
(72 F)
M SIZES
Flowstrip 4″ 10 cm (4 inches) 100 m (110 yards)
S a. : ees
M@ NOTES
+ The maximum use temperature is process dependent, Airtech recommends testing prior to use.
+ Flowstrip is not self-releasing and should be used in conjunction with a perforated release film or
peel ply if removal is required after cure.
Last updated : 2025-04-21
Catalog position : Resin infusion products
ste conditions ceo ue nding sarge beyond ot conta itech trator oes ese pony for the peronnnce fh mae for ry arc. The mates sls Artech inten ne
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet FLOWSTRIP
Resin flow channel for infusion processes
lM DESCRIPTION
Flowstrip is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven
polyester sleeve. Flowstrip is an extremely efficient resin flow channel which is easy to position on infusion laminates
and vacuum bag.
@ BENEFITS
+ Good resin flow speeds for reduced infusion cost.
+ Easily stored, unrolled, cut and positioned in the mould for faster builds.
+ Lays flat for easy vacuum bagging and simple to connect to with Airtech infusion connectors.
@ TECHNICAL DATA
Material type PP mesh in polyester sleeve
Colour Grey
Maximum use temperature 155 C (311 F)
Materials to avoid Compatible with most resin systems
Shelf life Unlimited when stored in original packaging at 22 C
(72 F)
M SIZES
Flowstrip 4″ 10 cm (4 inches) 100 m (110 yards)
S a. : ees
M@ NOTES
+ The maximum use temperature is process dependent, Airtech recommends testing prior to use.
+ Flowstrip is not self-releasing and should be used in conjunction with a perforated release film or
peel ply if removal is required after cure.
Last updated : 2025-04-21
Catalog position : Resin infusion products
ste conditions ceo ue nding sarge beyond ot conta itech trator oes ese pony for the peronnnce fh mae for ry arc. The mates sls Artech inten ne
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet FLOWRUNNER KF160
Mesh wrapped spiral resin feed
lM DESCRIPTION
FlowRunner KF 160 is a sewn tubular Knitflow 160 mesh with 1/2″ or 3/4″ spiral tube inserted for resin infusion
applications.
@ TECHNICAL DATA
Material type HDPE
Colour Orange
Configuration of net Knitted
Maximum use temperature 250 F (121 C)
Mesh weight 47 oz/yd? (160 g/m?)
SIZES
FlowRunner KF160-12 1/2 inch (12 mm) 4 inches (100 mm) 82 feet (25 m)
FlowRunner KF 160-34 3/4 inch (19 mm) 4 inches (100 mm) 82 feet (25 m)
M@ NOTES
+ The FlowRunner KF 160 is sold with spiral tube inserted.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2023-06-28
Catalog position : Resin infusion products
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VI10
FLOW MEDIA
Solvay
Composite Materials HQ
4500 McGinnis Ferry Rd
Alpharetta, GA 30005-3914 USA
31 July 2018
VI10
Light construction flow media
Ideally suited to infusion applications
Features and Benefits
Light construction rhombic (diamond) pattern resin
infusion mesh designed for use in vacuum assisted
resin infusion processes.
Constructed from Polypropylene and extruded in a
rhombic (diamond) pattern to allow controlled resin
flow across the laminate.
Basic, multi-use, very high conformability cast mesh.
Allows for a sustainable air evacuation route when
used with appropriate bagging materials
Can also be beneficial in debulking applications as it
can be used as a reusable breather beneath bagging
film to ensure adequate airflow.
No sharp edges.
PROPERTIES
Tg Onset by DSC 149 C 300 F
Color Green or Blue
Polymer PP
Weight ~100 gsm
Thickness ASTM D1777 .92mm .08mm 0.036 .004
AVAILABILITY
Width 1.04m 1.14 yard
Length 107m 117 yard
Common Name FM-VI10-GR-1040-107 or FM-VI10-BLU-1040-107
Other sizes available to order
Notes:
Technical information provided is based on laboratory findings and is believed to be correct. No warranties of any kind are made except that the materials
supplied are of standard quality.
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product SDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Solvay does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Solvay does not control the conditions under which its products are tested and used, Solvay cannot guarantee the
properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a specific use or
purpose. Solvay declines any liability with respect to the use made by any third party of the data and information contained herein. Solvay has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2018, Solvay. All rights reserved.
by | Sep 27, 2025
Cytec lofi FTSR
Process Materials Adhesive tape
Adhesive tape
Ideally suited for high temperature applications
Features
Polyester tape backed with a fully cured, pressure Strips easily after use.
sensitive adhesive. Designed for use in areas where thicker, stronger tape
Excellent temperature and pressure resistance. is required
Properties
Maximum cure temperature 204 C ___ 400 F
Color Green
Adhesive Rubber
Carrier Polyester
Total thickness 162um 0.006in
Adhesive thickness 37ym 0.001in
_Tape thickness 125ym 0.005in
Elongation at break 120%
Availability
Standard width 25 and S0mm land 2in
Standard length 66m T2yd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
seme echnical domaton sd recomendations contin in haa he oe renin od ath and resto testbed abe abl bt th Sexy sd compte oe ot end They
done conte a flea pion snd sa abe rome he ba ay uence wd ec othe Ce Sand Terms and onan le, Arey esa
ctrn the stb Or produ r hes headed ep opr anes meth nab conmcson heh nero of Bone wang seaens me rom oexacbvng
the pros ones ee the repre elt proband ie prevelant wa a pecatoay mesa raped eben ee podcs,etrmane tad
(conte 12s Pec Mea eg dc Pees stra, Gt Paes Matera ede Ste Proce Mae SA gs sede adem
intro vader prope of et epatn eat
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
24 March 2083,
by | Sep 27, 2025
Cytec lofi FT2
Process Materials Adhesive tape
Adhesive tape
Ideally suited for high temperature applications
Features
Polyester tape backed with a fully cured, pressure Excellent temperature and pressure resistance.
sensitive adhesive. Strips easily after use.
Properties
Maximum cure temperature | 204 C 40 F
Color _ Blue
Adhesive Silicone and Acrylic
Carrier Polyester
Total thickness 72yum ____0.003in
Adhesive thickness 50um 0.002in
Tape thickness 25um 0.001in
Elongation at break 100%
Availability
Standard width 25 and Somm and 2in
Standard length 66m 72yd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
st aaman nc ematon sd icmmendans cota in ha eth ern dla and etd on ets beved be eb bet he sexes content oe nt uceend They
donot costae a oe tan persn ad sha not be Sve form te bso wy segue conn Apres ae od sec tothe ers Stand Term and onioom of Saeco meek
detente ns oh product tended te rte pact sh mea edly commie she ipo ese ahi tems made rom or enacsreg
the predcs tino he er othe properiecl he rod andthe prone or wh they maybe sable tpt wth pecan meres regated handing tae peda. The nit cones
tere sunder conan see ad tite oe meted rom ie ie.
copra 212 Gec Proce Mater hy eye Pces Mati (Ante Proce Materia Tolou Sa Ge acess Matera han. Al gsr were. Altadena
teased oder the popes ther especie oes
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
2a March 2013,
by | Sep 27, 2025
Cytec lofi FT2
Process Materials Adhesive tape
Adhesive tape
Ideally suited for high temperature applications
Features
Polyester tape backed with a fully cured, pressure Excellent temperature and pressure resistance.
sensitive adhesive. Strips easily after use.
Properties
Maximum cure temperature | 204 C 40 F
Color _ Blue
Adhesive Silicone and Acrylic
Carrier Polyester
Total thickness 72yum ____0.003in
Adhesive thickness 50um 0.002in
Tape thickness 25um 0.001in
Elongation at break 100%
Availability
Standard width 25 and Somm and 2in
Standard length 66m 72yd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
st aaman nc ematon sd icmmendans cota in ha eth ern dla and etd on ets beved be eb bet he sexes content oe nt uceend They
donot costae a oe tan persn ad sha not be Sve form te bso wy segue conn Apres ae od sec tothe ers Stand Term and onioom of Saeco meek
detente ns oh product tended te rte pact sh mea edly commie she ipo ese ahi tems made rom or enacsreg
the predcs tino he er othe properiecl he rod andthe prone or wh they maybe sable tpt wth pecan meres regated handing tae peda. The nit cones
tere sunder conan see ad tite oe meted rom ie ie.
copra 212 Gec Proce Mater hy eye Pces Mati (Ante Proce Materia Tolou Sa Ge acess Matera han. Al gsr were. Altadena
teased oder the popes ther especie oes
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
2a March 2013,
by | Sep 27, 2025
Cytec 1of1 FT2R
Process Materials Adhesive tape
Adhesive tape
Ideally suited for high temperature applications
Features
Polyester tape backed with a fully cured, pressure Strips easily after use.
sensitive adhesive. * Designed for use in areas where thicker, stronger tape
Excellent temperature and pressure resistance. is required.
Properties
Maximum cure temperature 2oarc 400 F
Color Green
Adhesive | Rubber
Carrier Polyester
Total thickness 72um 0.003
Adhesive thickness S50um 0.002
Tape thickness 25um 0.001
Elongation at break 100%
Availability
Standard width 25 and Somm 1″ and 2
Standard length 66m Tayd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
Atsotemens techni nformaon nd recommendatons contedin hs dt sheet ae ena ood ah and are bsed on tests bleed ober, but thes acrcy nd comptes so parneed They
donc coatae snl ony end tat be Seed oar he bl wy sneer. Ards ote Cer Saad Tre nd conamrfsa, crse ee Sal
ete the tab othe pts ended pot och td Sa seme dab coma nett cheaper wn tse mde em onsobve
the prefs noe wef he poperes ef he pedi adhe ppc whch ey me be sale ther oth ol econ meron regent tdi See pecs Th wermon cotaned
tere nae oman eon tbe ied om tnt une
{copy 212 Cec roc Matra ghey) yc rocess Materia CAI nC Prcess Maia Tol Sa ec Prees Mater lan) A ight seed wate Al vademrs or
twgnred edema ote proprio tegen oer.
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTEC
Aerospace Materials | Industrial Materials | Process Materials
21 March 2013
