08IM035650_TDS.pdf

TECHNICAL DATA SHEET
IMPRESSION SET V
PRE-FIT VERIFICATION FILM
IMPRESSION SET V
Pre-fit verification film
Ideal for taking and setting the imprint of metallic and non-metallic details
Features and Benefits
e Impression Set V is a multi-purpose, 0.012in Can be applied to sub-assemblies to stimulate a bond
(0.3mm) thick, fluorescent, vinyl-based film line or mating joint, and will take on the same
specifically formulated to take and set the imprint of configuration as the simulated bond line or mating
metallic and non-metallic details during the pre-fit of surfaces.
can Ta ae Ce * The Impression Set V can then be inspected to
Z determine if additional steps need to be taken to
Intended to be used where other pre-fit inspections ensure proper bond lines or fitting.
cannot be accomplished or easily verified. ore
e Impression Set V can be processed at
temperatures from 65 to 93 C (150 to 200 F), and
minimal pressure will provide adequate imprints for
analysis.
PROPERTIES
Maximum use temperature 93 C 200 F
Softening point 150 F
Color Fluorescent red
Film Vinyl based
Tensile strength 24.8MPa 3600psi
Elongation (at break) 250%
AVAILABILITY
Thicknesses 0.3mm 0.012in
Standard width 1.5tyd
Standard length 50yd
Other colors and thicknesses may be available
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered fo be
representative of the product described. Solvay does nol express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy,
the completeness or the relevance of the data and information set out herein. Because the properties of this product can he significantly affected by the
fabrication and testing techniques employed, and since Solvay docs not control the conililions under which its products are tested and used, Solvay cannot
guarantee the properties provided will be obtained with olher processes and equipment. No guarantee or warranty (s provided if the product is adapted for a
specific use or purpose Solvay declines any liability with respect to the use made by any third party of the data and information contained herein. Solvay
hhas the right to change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 92017, Solvay. All
rights reserved
eee
Solvay
Composite Materials HQ
Alpharetta, GA 3005-3914 USA asking more from chemistry
03 July 2015