5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet FLOWSTRIP
Resin flow channel for infusion processes
lM DESCRIPTION
Flowstrip is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven
polyester sleeve. Flowstrip is an extremely efficient resin flow channel which is easy to position on infusion laminates
and vacuum bag.
@ BENEFITS
+ Good resin flow speeds for reduced infusion cost.
+ Easily stored, unrolled, cut and positioned in the mould for faster builds.
+ Lays flat for easy vacuum bagging and simple to connect to with Airtech infusion connectors.
@ TECHNICAL DATA
Material type PP mesh in polyester sleeve
Colour Grey
Maximum use temperature 155 C (311 F)
Materials to avoid Compatible with most resin systems
Shelf life Unlimited when stored in original packaging at 22 C
(72 F)
M SIZES
Flowstrip 4″ 10 cm (4 inches) 100 m (110 yards)
S a. : ees
M@ NOTES
+ The maximum use temperature is process dependent, Airtech recommends testing prior to use.
+ Flowstrip is not self-releasing and should be used in conjunction with a perforated release film or
peel ply if removal is required after cure.
Last updated : 2025-04-21
Catalog position : Resin infusion products
ste conditions ceo ue nding sarge beyond ot conta itech trator oes ese pony for the peronnnce fh mae for ry arc. The mates sls Artech inten ne