Cytec lofi 51789
Process Materials Peel ply
Features
Lightweight nylon 6.6 which has been heat set and Approved on a range of OEM specifications for
scoured for use directly against laminates or bond composite manufacture and metal bonding.
lines. CYTEC does not recommend for use with phenolic resin
Imparts a very fine weave pattern upon removal from systems or prepreg as acid in the catalyst can break
the laminate. down nylon materials. Customers are advised to carry
Available coated and non-coated, depending on user out their own internal compatibility tests.
requirement. Manufactured by Precision Fabrics Group (PFG).
NAT – Scoured and heat set finish
10 – International Orange for easy identification
VLP – Very Low Porosity finish
SRB Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
GFR Cross-linked, low transfer fluorocarbon finish for ease of release
Maximum use temperature 232 C 450 F
Color White, blue, orange and yellow
Fabric type Nylon
Fabric weight 62.7g/m? 1.8502/yd?
Standard width 1.47m S8in
Standard length 274.3m 300yd
Slit widths available
No special storage conditions required.
Handling of these products must conform to individual company guidelines and health and safety regulations.
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION CYTE |
Aerospace Materials | Industrial Materials | Process Materials
(800) 281-4975
sales@revchem.com
