by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 6400, Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125,
Dahlar Release Bag 375R, Dahlar Release Bag 460, Dahlar Release Bag 500,
Econolon, Airdraw 2, Thermalimide
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L!4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Thermoplastic films
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m” (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m” (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m” (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m” (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 #F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods
by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods
by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: product identifier
Department issuing data sheet
Contact person: see section 1: Department responsible for information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 6400, Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125,
Dahlar Release Bag 375R, Dahlar Release Bag 460, Dahlar Release Bag 500,
Econolon, Airdraw 2, Thermalimide
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L!4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Thermoplastic films
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m” (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m” (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m” (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m” (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 #F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods
by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods
by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: product identifier
Department issuing data sheet
Contact person: see section 1: Department responsible for information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 1 of 8
VIP Infusion Flow Green 75
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY /
UNDERTAKING
PRODUCT NAME: VIP Infusion Flow Green 75
USE OF SUBSTANCE/PREPARATION: High density polyethylene
RECOMMENDED USE:
MANUFACTURER: Umeco Process Materials
12801 Ann Street
Santa Fe Springs, CA 90670
FOR MORE INFORMATION CALL: 562-906-3300
IN CASE OF EMERGENCY CALL: 562-906-3300
2. HAZARDS IDENTIFICATION
INDICATION OF DANGER: This product an inert polyethylene. According to Directives
67/548/EEC and 1999/45/EC, it is not classified as hazardous to humans and the environment.
This product is not considered hazardous by the criteria described in the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Route of Entry: Skin and eye contact
Target Organs: None
Inhalation: Not a route of exposure under normal handling and usage. Vapors may
cause irritation at molten temperatures.
Skin Contact: Not considered hazardous under normal handling and usage.
Eye Contact: Not considered hazardous. May cause mechanical irritation if film
comes into contact with the eye.
Ingestion: Not a route of exposure. Not considered hazardous.
Carcinogenic Status: Not considered carcinogenic by NTP, IARC, and OSHA
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 2 of 8
3. HAZARD IDENTIFICATIONCOMPOSITION / INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENTS: None – Product is an inert polyethylene and poses no danger in its
current form.
Ingredient Name
CAS # % of Ingredient
Polyethylene 9002-88-4 >95%
Modifiers/Additives N/A <5%
The above product(s) are considered articles according to OSHA Hazard Communication
Standard 29 CFR 1910.1200 and, as such, are exempt from the material safety data sheet
provisions of 29 CFR 1910.1200 (G) (6). These products are considered non-hazardous when used
according to accepted practices for the intended use.
Components are not classified as dangerous according to Directive 1999/45/EC. Quantities of listed
compounds contained in this product are not reportable under the article exemption since they do
not release or otherwise result in exposure of a hazardous chemical under normal conditions of
use. Product is a solid film that requires no preparation and causes no health or environmental
hazards within the meaning of Directive 67/548/EEC.
4. FIRST AID MEASURES
Inhalation: Not an expected route of entry during normal handling and use.
Remove person to fresh air and seek medical attention if adverse
symptoms appear.
Skin Contact: Not an expected route of entry during normal handling and use.
Eye Contact: Not an expected route of entry during normal handling and use.
Ingestion: Obtain immediate medical attention.
Advice to Physicians: Treat symptomatically.
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 3 of 8
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
Flash Point (Method Used): >640 F (340 C)
Ignition Temperature: >680 F (360 C)
LEL: N/A
UEL: N/A
Extinguishing Method: Carbon dioxide, dry chemical, foam, water or other agents
as appropriate for materials in surrounding fire.
Special Fire Fighting Procedures: Wear NIOSH/MSHA approved positive pressure self-
contained breathing apparatus and full protective clothing.
Unusual Fire and Explosion Hazards: Products of combustion may include oxides of carbon and
nitrogen.
6. ACCIDENTAL RELEASE MEASURES
No specific measure necessary. Prevent material from entering drains or water courses.
7. HANDLING AND STORAGE
Handling Precautions: Use normal personal hygiene and good housekeeping.
Storage Requirements: Store in a cool (<140 F), dry area, away from sources of ignition.
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 4 of 8
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering Controls: No specific measures necessary.
Environmental Exposure Control: No specific measures necessary.
Respiratory Protection: No specific measures necessary.
Hand Protection: No specific measures necessary.
Eye Protection: No specific measures necessary.
Use safety glasses if necessary.
Skin Protection:
No specific measures necessary.
OCCUPATIONAL EXPOSURE STANDARDS:
INGREDIENT
NAME
Guideline Form of Exposure Concentration
N/A
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 5 of 8
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Solid clear plastic net
Physical Status: Solid
Odor: Slight waxy odor
pH: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Boiling Point: N/A
Freezing/Melting Point: 212-275 F (100-135 C)
Solubility: N/A
Spec. Grav./Density: 0.88-0.96 g/cm
3
10. STABILITY AND REACTIVITY
Stability: Normally Stable
Conditions to avoid: Avoid exposure to open flame or temperatures
exceeding recommended processing temperatures.
The maximum temperature to which the film can be
exposed will vary with exposure (dwell) time. Umeco
should be contacted if questions arise concerning
specific processing conditions.
Materials to avoid (Incompatibility): Strong oxidizers, acids, alkalis, halogens, halogenated
hydrocarbons
Hazardous Decomposition Products: Thermal decomposition products may include
acetaldehyde, ketones, acrolein, acetone, acetic acid,
formic acid, formaldehyde.
Hazardous Polymerization: Will not occur
11. TOXICOLOGICAL INFORMATION
Acute Toxicity: Not determined
Chronic Toxicity / Carcinogenicity Effects: Not expected to cause adverse health effects.
Genotoxicity: Not expected to cause mutagenic effects.
Reproductive / Developmental Toxicity: Not expected to cause adverse reproductive effects.
Other Data: N/A
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
12. ECOLOGICAL INFORMATION
Product is not classified as hazardous according to Directive 1999/45/EC. No relevant studies
identified.
Exotoxicity: No relevant studies identified.
Mobility: No relevant studies identified.
Persistance and degradability: No relevant studies identified
Bioaccumulative Potential: No relevant studies identified.
Other Adverse Effects: N/A
13. DISPOSAL CONSIDERATIONS
Dispose of in compliance with Federal, state and local government regulations. Usually is
considered an inert packaging material that can be recycled, incinerated, or landfilled.
14. TRANSPORT INFORMATION
No special precautions to be aware of under 1907/2006/EC.
US DOT Hazard Class: Not regulated
US DOT ID Number: Not applicable
UN Proper Shipping Name: None
UN Class: None
UN Packaging Group: None
Marine Pollutant: Not applicable
Classification for AIR Transportation (IATA): Consult current IATA regulations prior to
shipping by air.
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 6 of 8
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 7 of 8
15. REGULATORY INFORMATION
Quantities of listed components contained in this product are not reportable under article exemption
according to Directives 67/548/EEC and 1999/45/EC.
Toxic Substance Control Act (TSCA)
TSCA Inventory Status: N/A
Other TSCA Issues: None
SARA Title III/CERCLA
"Reportable Quantities" (RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the
following ingredients.
Ingredient Name
SARA/CERCLA RO (lb) SARA EHS TPO (lb)
No ingredients listed in this section. Section 311 Hazard Class: None. The following ingredients are SARA 313 "Toxic Chemicals". CAS numbers and weight percents
are found in Section 2.
Ingredient Name
Comment
No ingredients listed in this section.
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 8 of 8
State Right-To-Know
In addition to the ingredients found in Section 2, the following are listed for state right-to-know
purposes.
Ingredient Name Weight % Comment
N/A
California Prop. 65 : On This product does not contain any chemicals known to State of California
to cause cancer, birth, or any other reproductive defects.
Additional Regulatory Information:
This product is not intended to be used in any application which places the product in direct
contact with the human body, or in other FDA governed applications, unless specifically
designated otherwise in written material supplied by Umeco to the purchaser.
WHMIS Classification (Canada):
Not a controlled substance. (Considered to be a manufactured article.)
Foreign Inventory Status:
All base monomers and other components are listed on the EINECS Inventory.
16. OTHER INFORMATION
Prepared By:
Engineering and Quality Assurance
Bibliography:
- Directive EEC 67/548 and following adaptations
- Directive 1999/45/EC, as amended
- Directive 76/769/EEC and following amendments
- Directive 2001/58/EC
- EINECS/ELINCS
- 1907/2006/EC
Current Issue Date: 11/30/2012
Previous Issue Date: N/A
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtechintl.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet KNITFLOW 160
Drapable knitted resin distribution medium
DESCRIPTION
Knitflow 160 is designed to assist resin flow through the part during the vacuum assisted resin infusion process.
This resin flow medium works well with polyester, vinylester and epoxy resins. Knitflow 160 is a highly drapable
knitted flow medium with a high resin flow speed for most resins.
@ TECHNICAL DATA
Material type HDPE
Color Orange
Configuration of net Knitted
Maximum use temperature 257 F (125 C)
Mesh weight 4,7 oz/yd? (160 g/m?)
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
0.059 inch (1.5 mm) 59 inches (1.5 m) 328 feet (100 m)
5g 8 ae Py Om Uy eg DY te ey Ow at gy eG a HD DD
2H my ey Sy Hy Hs oe A Ms yD a ee Oe 0g es 8 og iy 8 BQ A Me QA AF
a ey ey a et Ri Hk Hes a iy APN Ps et Sh eg Hg ag A et Se yy PY eg
2D ya gy SH ay Hs 0s ey OO nf Peat as OO ey im 0) od gO sy GN ae a ay oR ay gy hy
2s 2 me HY yy es A ms Sy Se A yA Eg eg OH ay My SH Prag yO es MG A gO EE AT
8D Oy Ay my OH ig Og Os rg) rm wy gy im) 0g Dg Hs et His A) OO my gt my Om i Mid OH es HD
1D ay yy ay eg Prey Pa) A a Hy Pg ag en SY eT A et My OA EH
1 ay yy ay gh a Pt a yay ey Py es Sg HF my OY ae Sg SP Ye SG PD NT
any gy iggy me Ag ms Ys ye SN ep Ag A egy Ay AA Me Sg SY AD as HY gy Mag A
ey ym hataate pte tintehe liek sisal ay i yy OR) FP gH ty HN Hay ND wy ee HLH
Fy ag Ry ay Hg Sg tl yh eg Bg A gS ay ON ay OP 0] Eg Oy a AP Dy OT
Py Pines iy iy OO ey Rg pig OH es SPY ey OH ey rm) Magy OP ey HH g Hy OP Og PHg ag aE ey ART Ot es lag ee PT
ay eg ag Py OO aes 8 is ey Fs SM Br) RY gy My Sh HU og Ag HP tp Hy OP Es Hay gy CY HEY Dey Pe CT
eh ete et me ee a ee
Lisl Wal hagd head ts Lehn eked eds Sesldchapl + Vand bupd chads idee bigdes hapl < es geeeiaee pdeetionee land ctapda benuecihphe: We ode Ad
Hg gt ge OF og Ok ne 9 Oy yA wt Hag A Gt Ot SOD at Ot OO yD mS Sig) De og
0 ng He 0 gH i OF oe Fg ae ng A See A ng eg Eg A ay Wy SG A yD ar LGD gy AD OAD 8? OH ay A tS
ie ee ee eee et et ee
FF eg Og OF og Og as MD hey Fs eg ny eg 8 og ag A ig HO ey Pe ey aE
gO gg og Hc ag Sw Me Og ny 0g gO ag 0 as ay a TE: Oe Mt
eee ee ee ee eee ee ee en en ee
Fa gE hg ns ot 0g ig OH ag Soe eng og ie i Og Hg HR Ny Gy ey SO My EHD Hs Big Ct
@ NOTES
+ Other sizes available upon request.
+ Knitflow 160 does not roll up at the end when cut.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2021-01-21
Catalog position : Resin infusion products
the conditions or methods of use aching storage, ae beyond out contol Artech Intemational x. des not ese ay regan othe performance of material foray para we Te mate sodas
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS 8171 6/66
PREPREG
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS81716/66_02.21_Issue1
VAC-PAK
HS 8171 6/66
Vacuum bagging film
Ideally suited to high temperature and pressure applications
Features and Benefits
Heat stabilised, co- extruded co-polymer film
produced from modified nylon resin.
High temperature film which can be used for cures
up to 204 C (400 F) and remains pliable after
extended cure cycles.
The co-extrusion process combines multiple layers of
resin flow into film prior to exiting the extrusion die.
This process represents the most advanced state of
the art technology in blown film production.
Ideal for advanced composite fabrication and other
high temperature/pressure applications when softness
and workability are essential.
Can be heat seamed to meet any customer shape
requirements.
PROPERTIES
Maximum use temperature 204 C 400 F
Color Clear, blue and green
Tensile strength at break (ASTM D882) 103MPa 15000PSI
Elongation at break (ASTM D882) 400%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 4m (open) Up to 160in (open)
Formats available V sheet, sheet, lay flat tube
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VACFILM 800G
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VF800G_02.21_Issue1
VACFILM 800G
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Highly conformable, transparent, co-polymer film
which will remain soft and pliable during cures up
to 177 C (351 F).
Suitable for use with complex tooling geometry.
Not recommended for use with polyester or
vinylester resin systems.
PROPERTIES
Maximum Use Temperature 204 C (400 F)
Color Green
Tensile strength at break (ASTM D882)
Transverse direction 90MPa 13053PSI
Machine direction 90MPa 13053PSI
Elongation at break (ASTM D882)
Transverse direction
Machine direction
500%
550%
Yield
17.54m /kg (50 m) 9.44yd /lb (0.001 )
11.76m /kg (75 m) 6.38yd /lb (0.002 )
8.77m /kg (100 m) 4.72yd /lb (0.004 )
AVAILABILITY
Thickness 50, 75 and 100 m 0.002, 0.003 and 0.004in
Roll weight Up to 150kg Up to 330lbs
Widths Up to 7m Up to 275in
Formats available Lay-flat tube, V sheet, sheet, gusseted, C-fold
STORAGE
Vacfilm 800G is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use
is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content
the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product SDS for safe handling and personal protective equipment recomendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEET
STRETCH- VAC
TM
3000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV3000_0 2.21_Issue1
STRETCH- VAC
TM
3000
Vacuum bagging film, ideally suited to aerospace applications.
Features and Benefits
Multi-layer vacuum baggng film produced using our
state of the art co- extrusion technology.
Suitable for high temperature autoclave curing of
aerospace composites, including BMI resins.
Soft and supple with unprecedented tensile strength
for added security.
Unique formulation less sensitive to low humidity
conditions than standard nylon films. SV 3000 is a
mono-nylon film.
PROPERTIES
Maximum use temperature 204
C 400
F
Color Pink
Density 1.14 g/cm
3
0.65oz/in
3
DSC medium 217
C 422.6 F
Tensile Strength at break (ASTM D882) 96.53 MPa 14,000 psi
Elongation at break (ASTM D882) 475%
Yield for 50 m (0.002 ) 17.4m
2
/kg 9.44 yd
2
/lb
Yield for 75 m (0.003 ) 11.6m
2
/kg 6.29yd
2
/lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003 inches
Roll weight Up to 45 kg Up to 100lbs.
Widths 4.06m (open) 160 inches (open)
Formats available Tube, sheet, V-sheet, gusseted and C-fold
STORAGE, HANDLING AND USE
Nylon based films are sensitive to humidity. A high humidity level will act as plasticizer, making the film more flexible and softer,
while a low humidity level will cause the film to become stiffer.
To preserve the integrity of the materials when stored in their original packaging, it is advisable not to stack more than two pallets.
Do not store rolls on their ends.
STORAGE (RECOMMENDED)
Store the film in a relative humidity (RH) from 25% to 60% and a temperature range of 15 to 40
C (59 to 104 F). Avoid stocking in
RH less than 25% and temperatures less than 10 C (50 F).
USAGE (RECOMMENDED)
If possible use the film in a RH ranging from 50% to 60% and a temperature range of 20 to 25 C (68 to 77 F).
If possible condition the film before handling for 48 hours in the recommended RH and temperature ranges.
TECHNICAL DATA SHEET
STRETCH- VAC
TM
3000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV3000_0 2.21_Issue1
HEALTH & SAFETY
Please refer to the product SDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VACFILM 400Y
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VF400Y_02.21_Issue1
VACFILM 400Y
Vacuum bagging film
Ideally suited to marine and wind energy applications
Features and Benefits
Tough, high elongation elastomeric film, suitable for
de-bulking applications and oven curing of
composites up to temperatures of 150 C (302 F).
Due to the film s high elasticity, the necessity for
pleats is reduced in debulk operations.
Premium film for marine and wind energy applications.
Good release from sealant tape.
PROPERTIES
Maximum use
temperature
150 C (302 F)
Color Yellow
Tensile strength at break
(ASTM D882)
Transverse direction
Machine direction
40MPa
37MPa
5802PSI
5366PSI
Elongation at break
(ASTM D882)
Transverse direction
Machine direction
370%
360%
Yield
50 m (0.002in)
65 m (0.0025in)
75 m (0.003in)
19.12m /kg
14.71m /kg
12.74m /kg
10.37yd /lb
7.98yd /lb
6.91yd /lb
AVAILABILITY
Thickness 50, 65 and 75 m 0.002, 0.0025 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 10.05m (open) Up to 394in (open)
Formats available Tube, sheet, V sheet, gusseted and C-fold
STORAGE
Vacfilm 400Y is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use is
therefore an important factor for successful performance. The higher the moisture content the more flexible they become.
Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEET
STRETCH- VAC
TM
3000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV3000_0 2.21_Issue1
STRETCH- VAC
TM
3000
Vacuum bagging film, ideally suited to aerospace applications.
Features and Benefits
Multi-layer vacuum baggng film produced using our
state of the art co- extrusion technology.
Suitable for high temperature autoclave curing of
aerospace composites, including BMI resins.
Soft and supple with unprecedented tensile strength
for added security.
Unique formulation less sensitive to low humidity
conditions than standard nylon films. SV 3000 is a
mono-nylon film.
PROPERTIES
Maximum use temperature 204
C 400
F
Color Pink
Density 1.14 g/cm
3
0.65oz/in
3
DSC medium 217
C 422.6 F
Tensile Strength at break (ASTM D882) 96.53 MPa 14,000 psi
Elongation at break (ASTM D882) 475%
Yield for 50 m (0.002 ) 17.4m
2
/kg 9.44 yd
2
/lb
Yield for 75 m (0.003 ) 11.6m
2
/kg 6.29yd
2
/lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003 inches
Roll weight Up to 45 kg Up to 100lbs.
Widths 4.06m (open) 160 inches (open)
Formats available Tube, sheet, V-sheet, gusseted and C-fold
STORAGE, HANDLING AND USE
Nylon based films are sensitive to humidity. A high humidity level will act as plasticizer, making the film more flexible and softer,
while a low humidity level will cause the film to become stiffer.
To preserve the integrity of the materials when stored in their original packaging, it is advisable not to stack more than two pallets.
Do not store rolls on their ends.
STORAGE (RECOMMENDED)
Store the film in a relative humidity (RH) from 25% to 60% and a temperature range of 15 to 40
C (59 to 104 F). Avoid stocking in
RH less than 25% and temperatures less than 10 C (50 F).
USAGE (RECOMMENDED)
If possible use the film in a RH ranging from 50% to 60% and a temperature range of 20 to 25 C (68 to 77 F).
If possible condition the film before handling for 48 hours in the recommended RH and temperature ranges.
TECHNICAL DATA SHEET
STRETCH- VAC
TM
3000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV3000_0 2.21_Issue1
HEALTH & SAFETY
Please refer to the product SDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
li Huntington Beach Fax: + 1 714-899-8179 Website: wwwairtech.com
y ea CA92647 USA
INTERNATIONAL INC.
Data Sheet AIRFLOW 100, 100S, 100R, 100 ARMOR SLEEVE
High temperature autoclave/oven hoses
DESCRIPTION
Airflow 100 is a durable high temperature and high pressure autoclave hose. The hose construction consists of a
braided steel outer covering a PTFE inner tube supported with a flexible steel spring conduit. Its unique design
prevents collapse from vacuum or autoclave pressures.
Airflow 1008S has the same construction as the Airflow 100 with the addition of a steel outer protection coil.
Airflow 100R has the same construction as the Airflow 100 with the addition of a silicone rubber outer protective
sleeve.
Airflow 100 Armor Sleeve has the same construction as the Airflow 100 with an outer steel armor jacket.
BENEFITS
+ Safer vacuum for part curing with heavy duty metal hose construction.
+ More temperature resistance and longer in service life.
+ Different outer jackets for different use conditions.
Ml TECHNICAL DATA
Material type of inner tube PTFE
Material type of inner conduit Flexible steel
Material type of outer braid Steel
Material type of outer protection Flexible steel (100S) / Silicone rubber (100R)
End fitting 1/4 inch male NPT
Service temperature 260 C (500 F)
Max autoclave pressure 22 bar (320 psi)
lM SIZES
(9) Product Reference 9} Nominal Outer Hose Diameter Available Length
AIRFLOW 100 11.1. mm (7/16 inch) up to 30 m (100 feet)
AIRFLOW 100 S 11.1 mm (7/16 inch) up to 9 m (32 feet)
AIRFLOW 100 ARMOR SLEEVE 15.8 mm (5/8 inch) up to 22 m (75 feet)
AIRFLOW 100 R 15.8 mm (5/8 inch) up to 15 m (50 feet)
+ Though standard sizes are 3 meters (10 feet), hose lengths can be customized to meet your specific
requirements, contact Airtech for more information.
+ Other hose diameters and end fittings are available.
rear TO Fg Airflow 100
Wie Airflow 100S
aunannnarmnannorerecoTen ei Airflow 100
Armor Sleeve
OFT O]
sofia Airflow 100R ke
Airflow 100, 100R and 100 Armor Sleeve: % in. male NPT a ian
straight andor 90 end fitings on one or both ends.
Last updated : 2024-06-11
Catalog position : Vacuum valves and hoses
the conion or method endgame bred crotch Intestin neds atau reszenbay fhe paranormal”: Ach ema nc
cian buy enn and a np waar ng wie ion the ingd wane of earaba ano eter parce Te oman coaned her epeses wl papers Shine ed or
peer protein aniaeni proved ory Comeniene on) Tne ofcalnguoge sagan andte tel ona Caton Se
