by | Sep 27, 2025
Safety Data Sheet
Issue date 30-Nov-2015 Revision date 20-May-2015 Version 1
1. Identification
Product Identifier
Product name QM Diluent 50
Other means of identification
Recommended use of the chemical and restrictions on use
Recommended use Industrial silicone elastomer.
Application FOR INDUSTRIAL USE ONLY
Details of the Supplier of the Safety Data Sheet
Emergency Telephone Number
Company Phone Number 800-852-3147 (8AM – 5PM EST)
Emergency telephone Chemtrec 1-800-424-9300
2. Hazards Identification
Classification
OSHA Regulatory Status
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Label Elements
EMERGENCY OVERVIEW
Hazards Not Otherwise Classified (HNOC)
Not Applicable
OTHER INFORMATION
May be harmful in contact with skin.
3. Composition/information on Ingredients
Substance
Not Applicable
Mixture
Chemical name CAS No weight-% Trade secret
Supplier
CHT
7820 Whitepine Rd
Richmond, VA 23237
Manufacturer Address
CHT
8021 Reycan Road
Richmond, VA 23237
The product contains no substances which at their given concentration, are considered to be hazardous to health
Appearance Viscous liquid Physical State Liquid
_____________________________________________________________________________________________
PAGE 1 / 7
Odor Negligible
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Dimethyl Siloxane Trimethylsiloxy Terminated 63148-62-9 60 – 100 *
4. First aid measures
Description of first aid measures
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a physician.
Skin Contact Wash skin with soap and water.
INHALATION Remove to fresh air.
INGESTION Clean mouth with water and drink afterwards plenty of water.
Most Important Symptoms and Effects, Both Acute and Delayed
Symptoms No information available.
Indication of Any Immediate Medical Attention and Special Treatment Needed
Note to physicians Treat symptomatically.
5. Fire-fighting measures
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable Extinguishing MediaCAUTION: Use of water spray when fighting fire may be inefficient.
Specific Hazards Arising from the Chemical
No information available.
Explosion Data
Sensitivity to Mechanical ImpactNone.
Sensitivity to Static DischargeNone.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal Precautions Ensure adequate ventilation, especially in confined areas.
Environmental Precautions
Environmental Precautions See Section 12 for additional Ecological Information.
Methods and material for containment and cleaning up
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning Up Use personal protective equipment as required. Dam up. Cover liquid spill with sand, earth
or other non-combustible absorbent material. Take up mechanically, placing in appropriate
containers for disposal. Clean contaminated surface thoroughly.
7. Handling and Storage
_____________________________________________________________________________________________
PAGE 2 / 7
Precautions for Safe Handling
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Advice on safe handling Handle in accordance with good industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities
Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place.
Incompatible materials None known based on information supplied.
8. Exposure Controls/Personal Protection
Control Parameters
Ingredients with workplace
exposure parameters
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies.
Appropriate Engineering Controls
Engineering controls Showers
Eyewash stations
Individual protection measures, such as personal protective equipment
Eye/Face Protection Wear safety glasses with side shields (or goggles).
Skin and Body Protection Wear protective gloves and protective clothing.
Respiratory Protection No protective equipment is needed under normal use conditions.
General hygiene considerations Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Physical State Liquid
Explosive properties Not an explosive
Oxidizing properties This product is not an oxidizing agent
OTHER INFORMATION
Appearance Viscous liquid Odor Negligible
Color Clear Odor threshold No information available
Property VALUES Remarks Method
pH No information available
Melting point / Freezing point No information available
Boiling point / Boiling range No information available
Flash point > 140 C / > 284 F CC (closed cup)
Evaporation rate No information available
Flammability (solid, gas) No information available
Flammability limit in air
Upper flammability limit: No information available
Lower flammability limit: No information available
Vapor pressure No information available
Vapor density No information available
Relative density No information available
Water solubility No information available
Solubility in other solvents No information available
Partition coefficient No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity 50 cps
_____________________________________________________________________________________________
PAGE 3 / 7
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Softening point No information available
Molecular weight No information available
VOC content (%) No information available
Density 0.97
Bulk density No information available
10. Stability and Reactivity
Reactivity
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
None under normal processing.
hazardous polymerization No information available.
Conditions to avoid
No information available.
Incompatible materials
None known based on information supplied.
Hazardous decomposition products
None known based on information supplied.
11. Toxicological Information
Information on Likely Routes of Exposure
Product information No data available.
INHALATION No data available.
Eye Contact No data available.
Skin Contact No data available.
INGESTION No data available.
Chemical name Oral LD50 dermal LD50 Inhalation LC50
Dimethyl Siloxane Trimethylsiloxy
Terminated
63148-62-9
> 17 g/kg ( Rat ) > 24 g/kg ( Rat )> 2 g/kg ( Rabbit ) –
Information on Toxicological Effects
Symptoms No information available.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
sensitization No information available.
Germ Cell Mutagenicity No information available.
carcinogenicity No information available.
Reproductive Toxicity No information available.
STOT – Single Exposure No information available.
STOT – Repeated Exposure No information available.
Aspiration Hazard No information available.
No data available
_____________________________________________________________________________________________
PAGE 4 / 7
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Numerical Measures of Toxicity – Product information
The following values are calculated based on chapter 3.1 of the GHS document
ATEmix (oral) 17,017.00 mg/kg
ATEmix (dermal) 2,002.00 mg/kg
12. Ecological Information
Ecotoxicity
Persistence and Degradability
No information available.
Bioaccumulation
No information available.
Other Adverse Effects No information available
13. Disposal Considerations
Waste Treatment Methods
Disposal of wastes Disposal should be in accordance with applicable regional, national and local laws and
regulations.
Contaminated Packaging Do not reuse container.
14. Transport Information
DOT NOT REGULATED
IATA NOT REGULATED
IMDG NOT REGULATED
TDG NOT REGULATED
MEX NOT REGULATED
ICAO (air) NOT REGULATED
RID NOT REGULATED
ADR NOT REGULATED
ADN NOT REGULATED
15. Regulatory Information
International Inventories
TSCA Complies
DSL/NDSL Complies
EINECS/ELINCS Complies
ENCS Complies
IECSC Complies
KECL Complies
_____________________________________________________________________________________________
PAGE 5 / 7
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
PICCS Complies
AICS Complies
TCSI Complies
Legend:
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Substances List
EINECS/ELINCS – European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China Inventory of Existing Chemical Substances
KECL – Korean Existing and Evaluated Chemical Substances
PICCS – Philippines Inventory of Chemicals and Chemical Substances
AICS – Australian Inventory of Chemical Substances
TCSI – Taiwan Chemical Substance Inventory
US Federal Regulations
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any
chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372
SARA 311/312 Hazard Categories
Acute Health Hazard NO
Chronic health hazard NO
Fire Hazard NO
Sudden Release of Pressure Hazard NO
Reactive Hazard NO
CWA (Clean Water Act)
This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40
CFR 122.42)
CERCLA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pertaining to releases of this material
US State Regulations
California Proposition 65
This product does not contain any Proposition 65 chemicals
U.S. State Right-to-Know Regulations
U.S. EPA Label information
EPA Pesticide registration numberNot Applicable
16. Other information, including date of preparation of the last revision
Issue date 30-Nov-2015
Revision date 20-May-2015
Revision note
No information available
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
NFPA Health Hazards 0 Flammability 1 Instability 0 –
HMIS Health Hazards 0 Flammability 1 Physical Hazards 0
_____________________________________________________________________________________________
PAGE 6 / 7
–
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
materials or in any process, unless specified in the text.
End of Safety Data Sheet
_____________________________________________________________________________________________
PAGE 7 / 7
by | Sep 27, 2025
Safety Data Sheet
Issue date 30-Nov-2015 Revision date 20-May-2015 Version 1
1. Identification
Product Identifier
Product name QM Diluent 50
Other means of identification
Recommended use of the chemical and restrictions on use
Recommended use Industrial silicone elastomer.
Application FOR INDUSTRIAL USE ONLY
Details of the Supplier of the Safety Data Sheet
Emergency Telephone Number
Company Phone Number 800-852-3147 (8AM – 5PM EST)
Emergency telephone Chemtrec 1-800-424-9300
2. Hazards Identification
Classification
OSHA Regulatory Status
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Label Elements
EMERGENCY OVERVIEW
Hazards Not Otherwise Classified (HNOC)
Not Applicable
OTHER INFORMATION
May be harmful in contact with skin.
3. Composition/information on Ingredients
Substance
Not Applicable
Mixture
Chemical name CAS No weight-% Trade secret
Supplier
CHT
7820 Whitepine Rd
Richmond, VA 23237
Manufacturer Address
CHT
8021 Reycan Road
Richmond, VA 23237
The product contains no substances which at their given concentration, are considered to be hazardous to health
Appearance Viscous liquid Physical State Liquid
_____________________________________________________________________________________________
PAGE 1 / 7
Odor Negligible
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Dimethyl Siloxane Trimethylsiloxy Terminated 63148-62-9 60 – 100 *
4. First aid measures
Description of first aid measures
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a physician.
Skin Contact Wash skin with soap and water.
INHALATION Remove to fresh air.
INGESTION Clean mouth with water and drink afterwards plenty of water.
Most Important Symptoms and Effects, Both Acute and Delayed
Symptoms No information available.
Indication of Any Immediate Medical Attention and Special Treatment Needed
Note to physicians Treat symptomatically.
5. Fire-fighting measures
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable Extinguishing MediaCAUTION: Use of water spray when fighting fire may be inefficient.
Specific Hazards Arising from the Chemical
No information available.
Explosion Data
Sensitivity to Mechanical ImpactNone.
Sensitivity to Static DischargeNone.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal Precautions Ensure adequate ventilation, especially in confined areas.
Environmental Precautions
Environmental Precautions See Section 12 for additional Ecological Information.
Methods and material for containment and cleaning up
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning Up Use personal protective equipment as required. Dam up. Cover liquid spill with sand, earth
or other non-combustible absorbent material. Take up mechanically, placing in appropriate
containers for disposal. Clean contaminated surface thoroughly.
7. Handling and Storage
_____________________________________________________________________________________________
PAGE 2 / 7
Precautions for Safe Handling
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Advice on safe handling Handle in accordance with good industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities
Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place.
Incompatible materials None known based on information supplied.
8. Exposure Controls/Personal Protection
Control Parameters
Ingredients with workplace
exposure parameters
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies.
Appropriate Engineering Controls
Engineering controls Showers
Eyewash stations
Individual protection measures, such as personal protective equipment
Eye/Face Protection Wear safety glasses with side shields (or goggles).
Skin and Body Protection Wear protective gloves and protective clothing.
Respiratory Protection No protective equipment is needed under normal use conditions.
General hygiene considerations Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Physical State Liquid
Explosive properties Not an explosive
Oxidizing properties This product is not an oxidizing agent
OTHER INFORMATION
Appearance Viscous liquid Odor Negligible
Color Clear Odor threshold No information available
Property VALUES Remarks Method
pH No information available
Melting point / Freezing point No information available
Boiling point / Boiling range No information available
Flash point > 140 C / > 284 F CC (closed cup)
Evaporation rate No information available
Flammability (solid, gas) No information available
Flammability limit in air
Upper flammability limit: No information available
Lower flammability limit: No information available
Vapor pressure No information available
Vapor density No information available
Relative density No information available
Water solubility No information available
Solubility in other solvents No information available
Partition coefficient No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity 50 cps
_____________________________________________________________________________________________
PAGE 3 / 7
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Softening point No information available
Molecular weight No information available
VOC content (%) No information available
Density 0.97
Bulk density No information available
10. Stability and Reactivity
Reactivity
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
None under normal processing.
hazardous polymerization No information available.
Conditions to avoid
No information available.
Incompatible materials
None known based on information supplied.
Hazardous decomposition products
None known based on information supplied.
11. Toxicological Information
Information on Likely Routes of Exposure
Product information No data available.
INHALATION No data available.
Eye Contact No data available.
Skin Contact No data available.
INGESTION No data available.
Chemical name Oral LD50 dermal LD50 Inhalation LC50
Dimethyl Siloxane Trimethylsiloxy
Terminated
63148-62-9
> 17 g/kg ( Rat ) > 24 g/kg ( Rat )> 2 g/kg ( Rabbit ) –
Information on Toxicological Effects
Symptoms No information available.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
sensitization No information available.
Germ Cell Mutagenicity No information available.
carcinogenicity No information available.
Reproductive Toxicity No information available.
STOT – Single Exposure No information available.
STOT – Repeated Exposure No information available.
Aspiration Hazard No information available.
No data available
_____________________________________________________________________________________________
PAGE 4 / 7
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
Numerical Measures of Toxicity – Product information
The following values are calculated based on chapter 3.1 of the GHS document
ATEmix (oral) 17,017.00 mg/kg
ATEmix (dermal) 2,002.00 mg/kg
12. Ecological Information
Ecotoxicity
Persistence and Degradability
No information available.
Bioaccumulation
No information available.
Other Adverse Effects No information available
13. Disposal Considerations
Waste Treatment Methods
Disposal of wastes Disposal should be in accordance with applicable regional, national and local laws and
regulations.
Contaminated Packaging Do not reuse container.
14. Transport Information
DOT NOT REGULATED
IATA NOT REGULATED
IMDG NOT REGULATED
TDG NOT REGULATED
MEX NOT REGULATED
ICAO (air) NOT REGULATED
RID NOT REGULATED
ADR NOT REGULATED
ADN NOT REGULATED
15. Regulatory Information
International Inventories
TSCA Complies
DSL/NDSL Complies
EINECS/ELINCS Complies
ENCS Complies
IECSC Complies
KECL Complies
_____________________________________________________________________________________________
PAGE 5 / 7
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
PICCS Complies
AICS Complies
TCSI Complies
Legend:
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Substances List
EINECS/ELINCS – European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China Inventory of Existing Chemical Substances
KECL – Korean Existing and Evaluated Chemical Substances
PICCS – Philippines Inventory of Chemicals and Chemical Substances
AICS – Australian Inventory of Chemical Substances
TCSI – Taiwan Chemical Substance Inventory
US Federal Regulations
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any
chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372
SARA 311/312 Hazard Categories
Acute Health Hazard NO
Chronic health hazard NO
Fire Hazard NO
Sudden Release of Pressure Hazard NO
Reactive Hazard NO
CWA (Clean Water Act)
This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40
CFR 122.42)
CERCLA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pertaining to releases of this material
US State Regulations
California Proposition 65
This product does not contain any Proposition 65 chemicals
U.S. State Right-to-Know Regulations
U.S. EPA Label information
EPA Pesticide registration numberNot Applicable
16. Other information, including date of preparation of the last revision
Issue date 30-Nov-2015
Revision date 20-May-2015
Revision note
No information available
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
NFPA Health Hazards 0 Flammability 1 Instability 0 –
HMIS Health Hazards 0 Flammability 1 Physical Hazards 0
_____________________________________________________________________________________________
PAGE 6 / 7
–
_____________________________________________________________________________________________
QM Diluent 50 Revision date 20-May-2015
materials or in any process, unless specified in the text.
End of Safety Data Sheet
_____________________________________________________________________________________________
PAGE 7 / 7
by | Sep 27, 2025
SAFETY DATA SHEET
Date issued : 06/21/2011
SDS number : SC-5002 SILICONE THINNER
Date revised : 01/31/2023
Revision number : 4
SC-5002 SILICONE THINNER
1. Identification
Product identifier: SC-5002 SILICONE THINNER
Relevant identified uses: Silicone thinning agent
Manufacturer / Supplier Emergency telephone number (24 hour)
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. Hazard identification
Classification of the substance or mixture
This product does not meet the criteria for classification.
Label elements
Not Applicable
3. Composition/information on ingredients
Chemical name % w/w CAS No.
Siloxanes and Silicones, di-Me 80 – 10063148-62-9
4. First-aid measures
Eye: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get
medical advice/attention if irritation develops.
Skin: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
Ingestion: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the patient
is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
Inhalation: Remove to fresh air. Seek medical advice/attention if breathing becomes difficult or if respiratory irritation develops.
Indication of immediate medical attention and special treatment needed, if necessary: Symptomatic and supportive therapy as needed.
Following severe exposure medical follow-up should be monitored for at least 48 hours.
5. Fire-fighting measures
Suitable extinguishing media: Water spray, carbon dioxide, dry chemical, or alcohol-resistant foam.
Hazardous combustion products: Carbon monoxide, carbon dioxide, formaldehyde, and silicon dioxide.
Fire fighting procedures: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not release runoff
from fire control methods to sewers or waterways.
Fire fighting equipment: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of unmanned
hose holders or monitor nozzles for fighting large fires.
6. Accidental release measures
Small spill: Evacuate unnecessary personnel from the spill area. Wear necessary personal protective equipment (PPE) as specified in the SDS or
the site emergency response plan. Eliminate all sources of ignition. Ensure adequate ventilation. Dike and contain spill. Prevent product from
entering drains or waterways. Absorb with non-combustible material (such as sand, earth, diatomaceous earth, or vermiculite) and transfer to a
Page 1 of 4
container for disposal according to local/national regulations.
Environmental precautions
Water spill: Do not discharge into drains, surface waters, or groundwater.
General procedures: Refer to section 8 of SDS for personal protection details.
Release notes: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if necessary.
7. Handling and storage
General procedures: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over open containers.
Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
Precautions for safe handling: Use appropriate personal protective equipment as specified in Section 8. Handle in a well-ventilated area. Handle
and use in a manner consistent with good industrial/manufacturing techniques and practices.
Conditions for safe storage: Store in a dry and well-ventilated place, away from excessive heat, in original or similar container. Avoid
unnecessary contact. Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials.
Storage temperature: 65-80 F (18-27 C)
Shelf life: 12 months from date of shipment under manufacturers recommended storage conditions.
8. Exposure controls/personal protection
Appropriate engineering controls: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below recommended exposure limits.
Individual protection measures, such as personal protective equipment
Eye / face protection: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
Skin protection – hand protection: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be
used to prevent contact with eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer
maximum protection.
Respiratory protection: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may
be necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used
concurrently when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
Skin protection – other: Protective clothing should be selected and used in accordance with “Guidelines for the Selection of Chemical
Protective Clothing” published by ACGIH.
Occupational hygiene practices: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in immediate
work area should be prohibited. Wash hands before eating.
Other use precautions: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Training is
important. Follow all label precautions.
Comments: When heated to temperatures above 150 degree C in the presence of air, product can form formaldehyde vapors. Formaldehyde is a
potential cancer hazard, a known skin, and respiratory sensitizer, and irritant to the eyes, nose, throat, skin, and digestive system. Safe handling
conditions may be maintained by keeping vapor concentrations within the OSHA Permissible Exposure Limit for formaldehyde.
9. Physical and chemical properties
Physical state: Liquid
Color: Colorless
Odor: Slight
pH: No data available
Initial boiling point and boiling range: No data available
Flash point: > 150 C (302 F) Closed Cup
Vapor pressure: No data available
Relative vapor density: No data available
Relative density: 0.965 (water=1) at 25 C (77 F)
Solubility: Insoluble
Dynamic viscosity: 100 Centipoise at 25 C (77 F)
VOC content: Nil
Page 2 of 4
SC-5002 SILICONE THINNER
10. Stability and reactivity
Reactivity: Hazardous reactions will not occur under normal transport or storage conditions.
Chemical stability: This product is stable under normal ambient conditions of temperature and pressure.
Conditions to avoid: No data available
Possibility of hazardous reactions: No data available
Hazardous decomposition products: Carbon monoxide, carbon dioxide, formaldehyde, and silicon dioxide.
Incompatible materials: Oxidizing agents
11. Toxicological information
Acute toxicity
Chemical name LD50 (oral) mg/kg(rat) LD50 (dermal) mg/kg(rabbit) LC50 (inhalation) mg/l
Siloxanes and Silicones, di-Me > 15400 mg/kg Rat > 2000 mg/kg Rabbit No data available
Skin corrosion / irritation: No data available
Serious eye damage / irritation: No data available
Respiratory or skin sensitization: No data available
Germ cell mutagenicity: No data available
Reproductive toxicity: No data available
Specific Target Organ Toxicity – single exposure: No data available
Specific Target Organ Toxicity – repeated exposure: No data available
Aspiration hazard: No data available
12. Ecological information
Ecotoxicological information: No specific ecological data are available for this product. Refer to Section 6 for information regarding accidental
release and Section 15 for regulatory reporting information.
Persistence and degradability: No data available
Bioaccumulative potential: No data available
Other adverse effects: No data available
Mobility in soil: No data available
13. Disposal considerations
Disposal methods: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed
waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of
environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
14. Transport information
USA Department of Transport Regulations (DOT): Not Regulated
ICAO / IATA – air: Not Regulated
IMO / IMDG – sea: Not Regulated
15. Regulatory information
UNITED STATES
SARA Section 311/312 Hazard Categories
311/312 Health hazards: Refer to Section 2 for hazard classification.
313 reportable ingredients: This product does not contain any substances subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA Hazardous Substances and Reportable Quantities (RQ)
Page 3 of 4
SC-5002 SILICONE THINNER
CERCLA regulatory: This product does not contain any substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
TSCA (The Toxic Substances Control Act)
TSCA regulatory: This product does not contain any substances subject to TSCA Section 12(b) export notification.
TSCA Status: This product or its components are listed in or exempt from the TSCA inventory requirements.
Occupational safety and health administration (osha)
29 cfr1910.119—process safety management of highly hazardous chemicals: None of the chemicals in this product are considered highly
hazardous by OSHA.
California Proposition 65: This product does not contain any chemicals which are known to the State of California to cause cancer, birth
defects or other reproductive harm.
USA OSHA Hazard Communication Standard (29CFR 1910.1200): The contents of the SDS comply with the OSHA Hazard
Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS Regulatory Status: This product has been classified according to the hazard criteria of the CPR and the SDS contains all the
information required by the CPR.
Domestic Substances List (DSL) / Non-Domestic Substances List (NDSL): All components in this product are listed in or exempted from the
Domestic Substances List (DSL) or the Non-Domestic Substances List (NDSL).
16. Other information
Reason for issue: Revision
Date revised: 01/31/2023
Revision summary: This SDS replaces the 08/29/2019 SDS.
HMIS rating
Health 0
Flammability 1
Physical hazard 0
Personal protection X
NFPA codes
1
0 0
HMIS ratings notes: Personal Protection: See Section 8
Manufacturer disclaimer: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of
BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc. assumes no legal
responsibility for use or reliance upon this data.
Page 4 of 4
SC-5002 SILICONE THINNER
by | Sep 27, 2025
SAFETY DATA SHEET
Date Issued : 12/15/2008
MSDS No : SC-5001
Date-Revised : 2/26/2014
Revision No : 1
SC-5001
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SC-5001
GENERAL USE: Silicone thickening agent
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Customer Service Number: (714) 734-8450
Fax: (714) 734-8929
CHEMTREC (US Transportation): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATIONS
Not a dangerous substance according to GHS.
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE AND ODOR: Pale yellow viscous liquid with no odor.
IMMEDIATE CONCERNS: Avoid eye and skin contact. Avoid breathing vapors. May cause eye and skin irritation. Use in well ventilated
areas.
POTENTIAL HEALTH EFFECTS
EYES: May cause slight irritation.
SKIN: Non-irritating. Low acute dermal toxicity.
INGESTION: Low acute oral toxicity.
INHALATION: Inhalation not likely.
MEDICAL CONDITIONS AGGRAVATED: None Expected
ROUTES OF ENTRY: Eye and skin contact, inhalation of vapors, or accidental ingestion.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS
Silicone polyether copolymer 60 – 100Proprietary
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes.
Get medical attention if irritation persists.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if irritation or rash
develops. Wash clothing before reuse.
INGESTION: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the
patient is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air. Seek medical attention if breathing becomes difficult or if respiratory irritation develops.
NOTES TO PHYSICIAN: Symptomatic and supportive therapy as needed. Following severe exposure medical follow-up should be
Page 1 of 5
monitored for at least 48 hours.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Dry chemical, foam, or carbon dioxide.
HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide, carbon dioxide, formaldehyde, and silica.
EXPLOSION HAZARDS: Material will burn under fire conditions.
FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not
release runoff from fire control methods to sewers or waterways.
FIRE FIGHTING EQUIPMENT: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of
unmanned hose holders or monitor nozzles for fighting large fires.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Evacuate the area. Clean-up should only be performed by trained personnel. People dealing with a major spill should wear
full protective clothing including appropriate respiratory protection. Prevent product spill from entering sewers or waterways. Neutralize
small spills with a decontaminant.
LARGE SPILL: Contain and absorb large spills onto an inert, non-flammable adsorbent carrier (such as earth or sand). Shovel into open-top
drums or plastic bags for further decontamination, if necessary. Wash the spill area clean with a liquid decontaminant. Remove and properly
dispose of residues. Notify applicable government authorities if release is reportable. (See CERCLA in Section 15).
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Do not discharge into drains or rivers.
GENERAL PROCEDURES: Refer to section 8 of SDS for personal protection details.
RELEASE NOTES: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if
necessary.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over
open containers. Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
HANDLING: Use appropriate personal protective equipment as specified in Section 8. Handle in a well ventilated area. Handle and use in a
manner consistent with good industrial/manufacturing techniques and practices.
STORAGE: Store in a dry and well-ventilated place, away from excessive heat, in original or similar container. Avoid unnecessary contact.
Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials.
STORAGE TEMPERATURE: 65-80 F (18-27 C)
SHELF LIFE: 12 months from date of shipment under manufacturers recommended storage conditions.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV SupplierOEL
Chemical Name ppm mg/m
3
ppm mg/m
3
ppm mg/m
3
Silicone polyether copolymer
TWA NE NE NE NE NE NE
STEL NE NE NE NE NE NE
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
Page 2 of 5
SC-5001
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
SKIN: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be used to prevent contact with
eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer maximum protection.
RESPIRATORY: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may be
necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used
concurrently when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
PROTECTIVE CLOTHING: Protective clothing should be selected and used in accordance with ‘Guidelines for the Selection of Chemical
Protective Clothing’ published by ACGIH.
WORK HYGIENIC PRACTICES: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in
immediate work area should be prohibited. Wash hands before eating.
OTHER USE PRECAUTIONS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Training is important. Follow all label precautions.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Viscous liquid
ODOR: Odorless
COLOR: Pale yellow
pH: 6
PERCENT VOLATILE: Nil
FLASHPOINT AND METHOD: 180 C (356 F) EEC closed cup
VAPOR PRESSURE: Not Established
VAPOR DENSITY: Not Established
BOILING POINT: Not Established
SOLUBILITY IN WATER: Soluble
SPECIFIC GRAVITY: 1.04 (water=1) at 25 C (77 F)
VISCOSITY: 1800 Centipoise at 25 C (77 F)
VOC (Volatile Organic Compound): Nil
10. STABILITY AND REACTIVITY
STABILITY: This product is stable under normal ambient conditions of temperature and pressure.
POLYMERIZATION: Product will not undergo polymerization.
CONDITIONS TO AVOID: High temperatures and sources of ignition.
POSSIBILITY OF HAZARDOUS REACTIONS: Hazardous reactions will not occur under normal transport or storage conditions.
HAZARDOUS DECOMPOSITION PRODUCTS: Dimethylcyclosiloxanes, methylphenylcyclosiloxanes, and formaldehyde.
INCOMPATIBLE MATERIALS: Strong oxidizing agents, strong alkalies, and strong acids.
11. TOXICOLOGICAL INFORMATION
TOXICITY TO ANIMALS
Chemical Name
ORAL LD50
(rat)
DERMAL LD50
(rabbit)
INHALATION
LC
50 (rat)
Silicone polyether copolymer Not Established Not Established Not Established
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: No data available.
ECOTOXICOLOGICAL INFORMATION: No specific ecological data are available for this product. Refer to Section 6 for information
regarding accidental release and Section 15 for regulatory reporting information.
Page 3 of 5
SC-5001
BIOACCUMULATION/ACCUMULATION: No data available.
DISTRIBUTION: No data available.
CHEMICAL FATE INFORMATION: No data available.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain
some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via
a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements
of environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material
and runoff and contact with soil, waterways, drains and sewers.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION) LAND: Not Regulated
AIR (ICAO/IATA): Not Regulated
VESSEL (IMO/IMDG): Not Regulated
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZ ATION ACT)
311/312 HAZARD CATEGORIES: None Known
313 REPORTABLE INGREDIENTS: This product contains the following substances subject to the reporting requirements of Section
313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
None
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND L IABILITY ACT)
CERCLA REGULATORY: For this/these chemicals, release of more than the Reportable Quantity to the environment in a 24-hour
period requires notification to the National Response Center (800-424-8802 or 202-426-2675):
None
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA REGULATORY: This product contains chemical(s) subject to TSCA Section 12(b) export notification:
None
TSCA STATUS: This product or its components are listed in or exempt from the TSCA inventory requirements.
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA )
29 CFR1910.119—PROCESS SAFETY MANAGEMENT OF HIGHL Y HAZARDOUS CHEMICALS: None of the chemicals in
this product are considered highly hazardous by OSHA.
CALIFORNIA PROPOSITION 65: This product contains chemical(s) which are known to the State of California to cause cancer, birth
defects or other reproductive harm, and may be subject to the requirements of California Proposition 65 (CA Health & Safety Code
Section 25249.5):
None
OSHA HAZARD COMM. RULE: The contents of the SDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS (WORKPLACE HAZARDOUS MATERIALS INFORMATION SY STEM): This product has been classified according to the
hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
WHMIS CLASS: Does not meet criteria.
DOMESTIC SUBSTANCE LIST (INVENTORY): All components in this product are listed in or exempted from the Domestic
Substances List (DSL) or the Non-Domestic Substances List (NDSL).
16. OTHER INFORMATION
REASON FOR ISSUE: Revision
Page 4 of 5
SC-5001
REVISION SUMMARY: This MSDS replaces the 12/15/2008 MSDS.
HMIS RATING
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA CODES
1
1 0
HMIS RATINGS NOTES: Personal Protection: See Section 8
MANUFACTURER DISCLAIMER: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc.
assumes no legal responsibility for use or reliance upon this data.
Page 5 of 5
SC-5001
by | Sep 27, 2025
Vy SILP N Inc SAFETY DATA SHEET: Page 1
1. Identification 3. Composition/Information on Ingredients
Product Identifier: | RU-480 Liquid Rubber Part A
Product Code(s): SPRU480A
Use: Component for Polyurethane Mold Rubber. For
Industrial/Professional use only. Exact concentrations are withheld as trade secret. Other ingredients
Manufacturer: Polytek Development Corp. are not listed because they are either not hazardous or are below
55 Hilton St., Easton, PA 18042 USA concentration/cut-off thresholds.
Phone Number: 800-858-5990 (8 a.m. to 6:30 p.m. EST) . 5
Emergency Phone: CHEMTREC 800-424-9300 or & First-Aid Measures
+1 703-527-3887 Eye Contact: Rinse thoroughly with water for at least 15 minutes,
E-mail: sds@polvtek.com holding the eyelids open to be sure the material is washed out. Get
medical attention if irritation develops or persists.
2. Hazards Identification Skin Contact: Remove contaminated clothing. Wash contact area
GHS Classification: thoroughly with soap and water. Get medical attention if irritation
Acute Toxicity (Inhalation) ~ Category 4 develop or persist. Launder clothing before reuse. Discard items that
Skin Irritation Category 2 cannot be decontaminated. ;
Eye Imitation Category 2A Inhalation: Remove person to fresh air. Give artificial respiration if
Respiratory Sensitization Category 1 needed. If breathing is difficult, oxygen should be administered by
Skin Sensitization Category 1 qualified personnel. Get immediate medical attention.
Carcinogenicity Category 2 Ingestion: Do not induce vomiting unless directed to do so by medical
Label Elements: Danger personnel. Get medical attention if you feel unwell.
Most Important Symptoms/Effects: Causes skin and eye irritation.
Vapors or mists may cause respiratory irritation. May cause allergic skin
Hazard Phrases and/or respiratory reaction in sensitized persons. Symptoms include skin
H315 Causes skin irritation. rash, wheezing, shortness of breath and other asthma symptoms.
317 May cause an allergic skin reaction. Indication of Immediate Medical Attention/Special Treatment:
H319 Causes serious eye irritation. Immediate medical attention is required for asthmatic symptoms or
332 Harmful if inhaled. serious inhalation exposures. Respiratory symptoms, including
334 May cause allergy or asthma symptoms or breathing pulmonary edema, may be delayed. Persons receiving significant
difficulties if inhaled. exposure should be observed 24-48 hours for signs of respiratory
H351 Suspected of causing cancer. distress. Persons sensitized to Diisocyanates should consult a physician
Precautionary Phrases before working with respiratory irritants or sensitizers.
P203 Obtain, read and follow all safety instructions before use. gare oa
P261 Avoid breathing fumes, vapors, mists or sprays. 5. Fire-Fighting Measures
P264 Wash thoroughly after handling. Extinguishing Media: Use water fog, foam, carbon dioxide or dry
P271 Use only outdoors or in a well-ventilated area. chemical. Do not use solid water stream. Solid stream of water into hot
P272 Contaminated clothing should not be allowed out of the product may cause violent steam generation or eruption.
workplace. Specific Hazards: Not classified as flammable or combustible. Product
P280 Wear protective gloves, protective clothing, eye protection, and | will bum under fire conditions.
face protection. . ; Special Protective Equipment & Precautions for Fire-Fighters: Wear
P284 _In case of inadequate ventilation wear respiratory protection. | positive pressure, self-contained breathing apparatus and full-body
P302+P352 IF ON SKIN: Wash with plenty of soap and water. protective clothing. Cool fire-exposed containers with water.
P304+P340 IF INHALED: If breathing is difficult, remove person to
fresh air and keep comfortable for breathing. 6. Accidental Release Measures
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several | personal Precautions, Protective Equipment and Emergency
minutes. Remove contact lenses, if present and easy to do. Procedures: Remove all ignition sources. Clear non-emergency
Continue rinsing. personnel from the area. Ventilate area. Wear appropriate protective
P317 Get medical help. ; ; clothing to prevent eye and skin contact and respiratory protection.
Pass 8 i exposed or concemed, get medical aves help. Methods and Materials for Containment and Cleanup: Cover with an
P337+P317 If eye irritation persists: Get medical help. ae ai Dent ath and barsien into yar mare potraed for
P342+P316 If experiencing respiratory symptoms: Get emergency tsposa . Do not sea! the confainer since CO2 is generated on contact
medical help immediately with moisture and dangerous pressure buildup can occur. Decontaminate
P362+P364 Take off contaminated clothing and wash before reuse. Floor area rth miznane of wate: piss isopeopy/ alcobel (10-20%),
P405 Store locked up. jouschold ammonia (10%), and detergent (2%)
P501 Dispose of contents and container in accordance with local, 7. Handling and Storage
regional and national regulations. – Safe Handling: Avoid breathing fumes, vapors, mists or sprays. Use
Supplemental Information: Individuals sensitized to isocyanates should | ith adequate ventilation. Avoid contact with the eyes, skin and clothing.
discontinue use, Long-term overexposure to isocyanates may cause lung | wach, thoroughly after handling. Do not eat, drink or smoke in the work
damage. This is one part of a two-part system. Read and understand the | area. Keep container closed when ot in use.
hazard information on part B before using. Safe Storage: Store indoors at temperatures between 55 F and 95 F
(13 C and 35 C). Store in original, unopened containers. Protect from
Date Prepared/Revised: January 20, 2023
XAEH&SSDS’SilpakRU-480A.docx
by | Sep 27, 2025
470 EAST BONITA AVE. POMONA, CA 91767
PH (909) 625-0056 WWW.SILPAK.COM FX (909) 625-0082 |
MATERIAL SAFETY DATA SHEET
SECTION
TRADE NAME AND SYNONYMS: RL-461
MANUFACTURER: SILPAK, INC.
ADDRESS: 470 EAST BONITA AVE. POMONA, CA 91767
EMERGENCY TELEPHONE: 909-625-0056, CHEMTREC 1-(800)-424-9300
CHEMICAL NAME AND SYNONYMS; LATEX LIQUID MIXTURE
HMIS RATING: HEALTH1 FIREHAZARDO REACTIVITYO PROTECTIONB
SECTION Il HAZARDOUS INGREDIENTS
COMPONENTS CASE % BY WEIGHT
LATEX SOLIDS 9006-04-6 60%
AMMONIUM HYDROXIDE 1336-21-68 1.6%
AMMONIA (less than 20%solution) 7664-41-7 <1%
WATER 38%
SECTION Ili PHYSICAL DATA
BOILING POINT (F): 214 F SPECIFIC GRAVITY: 1.07
VAPOR PRESSURE (mm Hg): 28
PERCENT VOLATILE BY VOLUME (%): 30
< VAPOR DENSITY (AIR=1): 1
SOLUBILITY IN WATER; 100%
APPEARANCE AND ODOR: White liquid, ammonia odor
PH: 10 TO 11.2
VOC RATING : No reportable materials
SECTION WV
FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (METHOD USED): N/A
FLAMMABLE CLASS: Not regulated
AUTOIGNITION TEMPERATURE: NVA
EXTINGUISHING MEDIA: Carbon Dioxide - Dry chem or Foam
SPECIAI. FIRE FIGHTING PROCEDURES: In fire material generates toxic fumes, self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Burning dry rubber latex creates dense black smoke with potential toxic vapors.
SECTION V HEALTH KAZARD DATA
THRESHOLD LIMIT VALUE; 25 ppm AMMONIA
EFFECTS OF OVEREXPOSURE: Contact may cause skin and eye Irritation. Avoid breathing vapors.
EMERGENCY AND FIRST AID PROCEDURES:
SKIN: Wash with large amounts of soap and water.
EYES: Immediately flush with water for at least 15 minutes. Consult a physician if irritation develops or persists.
INGESTION: May causs irritation to mucous membranes of mouth, throat, esophagus, and stomach.
INHALATION; Exposure to mist or spray may cause coughing, sneezing, or other symptoms of upper respiratory (ract irritation.
SECTION VI REACTIVITY DATA
STABILITY: Stable, normal conditions, avoid extreme temperatures freezing or high heat.
1
Received Time Nov. 2. 2011 3:17PM No. 0243
by | Sep 27, 2025
SILF f K, SaFETY DATA SHEET: Page 1
1. Identification 3. Composition/Information on Ingredients
Product Identifier: RU-448 Liquid Rubber Part A
Product Code(s): SPRU448A Toluene Diisocyanate (TDD) 26471-62-5
Use: Component for Polyurethane Mold Rubber. For Polyether polyol-TDI prepolymer 9057-91-4 85-90
Industrial/Professional use only. Exact concentrations are withheld as trade secret. Other ingredients
Manufacturer: Polytek Development Corp. are not listed because they are either not hazardous or are below
55 Hilton St., Easton, PA 18042 USA concentration/cut-off thresholds.
Phone Number: 800-858-5990 (8 a.m. to 6:30 p.m. EST) . 5
4. m
Emergency Phone: | CHEMTREC 800-424-9300 or First ag Meats ; :
+1 703-527-3887 Eye Contact: Rinse thoroughly with water for at least 15 minutes,
E-mail: sds@polytek.com holding the eyelids open to be sure the material is washed out. Get
ean medical attention if irritation develops or persists.
2. Hazards Identification Skin Contact: Remove contaminated clothing. Wash contact area
sfcation: thoroughly with soap and water. Get medical attention if irritation
saa venation (Inhalation) Category 4 develop or persist. Launder clothing before reuse. Discard items that
ai be decontaminated.
Skin Imitation Category 2 cannot
Bye Irritation Category: 2A Inhalation: Remove person to fresh air. Give artificial respiration if
Respiratory Sensitization Category 1 needed. If breathing is difficult, oxygen should be administered by
Skin Sensitization Category | qualified personnel. Get immediate medical attention.
Carcinogenicity Category 2 Ingestion: Do not induce vomiting unless directed to do so by medical
Label Elements: Danger personnel. Get medical attention if you feel unwell.
Most Important Symptoms/Effects: Causes skin and eye irritation.
Vapors or mists may cause respiratory irritation. May cause allergic skin
Hazard Phrases and/or respiratory reaction in sensitized persons. Symptoms include skin
315. Causes skin irritation. rash, wheezing, shortness of breath and other asthma symptoms.
H317 May cause an allergic skin reaction. Indication of Immediate Medical Attention/Special Treatment:
H319 Causes serious eye irritation. Immediate medical attention is required for asthmatic symptoms or
H332 Harmful if inhaled. | serious inhalation exposures. Respiratory symptoms, including
H334 May cause allergy or asthma symptoms or breathing pulmonary edema, may be delayed. Persons receiving significant
difficulties if inhaled. exposure should be observed 24-48 hours for signs of respiratory
H351 Suspected of causing cancer. distress. Persons sensitized to Diisocyanates should consult a physician
Precautionary Phrases before working with respiratory irritants or sensitizers.
203 Obtain, read and follow all safety instructions before use. eo
P261 Avoid breathing fumes, vapors, mists or sprays. 5. Fire-Fighting Measures
264 Wash thoroughly after handling. Extinguishing Media: Use water fog, foam, carbon dioxide or dry
P271 Use only outdoors or in a well-ventilated area. chemical. Do not use solid water stream. Solid stream of water into hot
P272 Contaminated clothing should not be allowed out of the product may cause violent steam generation or eruption.
workplace. Specific Hazards: Not classified as flammable or combustible. Product
P280 Wear protective gloves, protective clothing, eye protection, and | will burn under fire conditions.
face protection. Special Protective Equipment & Precautions for Fire-Fighters: Wear
P284 _In case of inadequate ventilation wear respiratory protection. positive pressure, self-contained breathing apparatus and full-body
P302+P352 IF ON SKIN: Wash with plenty of soap and water. protective clothing. Cool fire-exposed containers with water.
P304+P340 IF INHALED: If breathing is difficult, remove person to .
fresh air and keep comfortable for breathing 6. Accidental Release Measures
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several | personal Precautions, Protective Equipment and Emergency
minutes. Remove contact lenses, if present and easy to do. Procedures: Remove all ignition sources. Clear non-emergency
Continue rinsing. personnel from the area. Ventilate area. Wear appropriate protective
P317 Get medical help. diealadvd clothing to prevent eye and skin contact and respiratory protection.
P318 _ IF exposed or concerned, get medical advice. : . ;
P333+P317 If skin irritation or rash occurs: Get medical help. Methods and Materials for Containment and Cleanup: Cover with an
P3374P317 If eve irritation persists: Get medical hel inert absorbent material and collect into an appropriate container for
ye itr persists: ne. disposal. Do not seal the container since CO? is generated on contact
P342+P316 If experiencing respiratory symptoms: Get emergency with moisture and dangerous pressure buildup can occur. Decontaminate
medical help immediately. re and ” ; .
P362+P364 Take off contaminated clothing and wash before reuse. floor area with amare) parry ian it alcohol (10-20%),
P405 Store locked up. ame :
P501 Dispose of contents and container in accordance with local, 7. Handling and Storage
regeonal andiuatienal weguiations, – Safe Handling: Avoid breathing fumes, vapors, mists or sprays. Use
Supplemental Information: Individuals sensitized to isocyanates should | with adequate ventilation. Avoid contact with the eyes, skin and clothing,
discontinue use. Long-term overexposure to isocyanates may cause lung | wach thoroughly after handling. Do not eat, drink or smoke in the work
damage. This is one part ofa two-part system. Read and understand the | area. Keep container closed when not in use.
hexed infyeaation on part B hefece wing. Safe Storage: Store indoors at temperatures between 55 F and 95 F
(13 C and 35 C). Store in original, unopened containers. Protect from
Date Prepared/Revised: January 20, 2023
XAEH&SSDSSilpal RU-H8A docx
by | Sep 27, 2025
SAFETY DATA SHEET
1
1. CHEMICAL AND COMPANY IDENTIFICATION
Product Identifier: RL-461, RL-451-80, RL-SPRAY, RL-BALLOON
RL-561, RLM-460
Use: Molding & Casting Latex Rubber;
Professional/Industrial use
Company: SILPAK, INC.
470 EAST BONITA AVE. POMONA, CA 91767
Phone Number: 909-625-0056,
Emergency Phone: CHEMTREC 1-(800)-424-9300
Email: silpak@aol.com
2. HAZARDS IDENTIFICATION
GHS HAZARD CLASSIFICATION: NON HAZARDOUS
LABELING ELEMENTS: None Required.
PRECAUTIONARY STATEMENTS:
Ammonia vapors may cause irritation of the respiratory tract, eyes and
nose. If ingested, can cause nausea, vomiting and gastric irritation.
Prolonged exposure to latex (liquid) may irritate skin.
SUPPLEMENTAL INFORMATION:
People exposed to products containing natural latex rubber may develop
allergic reactions such as skin rashes, hives, nasal/eye/or sinus
symptoms, asthma and possibly shock. Ammonia vapor may cause
burning eyes, running nose, coughing and possibly chest pain.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Mixture
General Information: Mixture of Natural latex, additives, fillers.
4. FIRST AID MEASURES
INHALATION: Remove person to fresh air. Consult a physician.
SKIN CONTACT: Wash contact area with soap and water. Get medical
attention if irritation develops or persists.
EYE CONTACT: Immediately flush with water for 15 minutes while
holding eyelids open. Get medical attention if irritation develops or
persists or if visual changes occur.
INGESTION: Do not induce vomiting. Rinse mouth thoroughly. Consult a
physician.
MOST IMPORTANT SYMPTOMS/EFFECTS, ACUTE AND DELAYED:
Vapor from Ammonia may cause burning eyes, runny nose, coughing and
possibly chest pain.
Notes to Physician:
Hazards: No specific recommendations
Treatment: No specific recommendations
5. FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA: Water, dry chemical, carbon dioxide (CO2),
and foam.
UNSUITABLE EXTINGUISHING MEDIA: None known.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Hazardous
decomposition products: Oxides of nitrogen, smoke, soot and carbon
dioxide and carbon monoxide.
SPECIAL FIRE FIGHTING PROCEDURES: No specific
recommendations.
SPECIAL PROTECTIVE EQUIPMENT & PRECAUTIONS FOR
FIREFIGHTERS: Wear approved positive pressure, self-contained
breathing apparatus (SCUBA) and full body protective clothing. Use water
to cool fire exposed containers and disperse vapors.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND
EMERGENCY PROCEDURES: Wear appropriate protective clothing,
gloves and safety glasses to prevent eye and skin contact.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP:
Small Spill: Contain spill. Allow material to air cure.
Large Spill: Dike and contain spill. Scrape up or cover with an inert
absorbent material and collect into an appropriate container for disposal.
Calcium chloride or similar material can be used to coagulate latex.
ENVIRONMENTAL PRECAUTIONS: None
7. HANDLING AND STORAGE
HANDLING: Avoid inhalation of vapors. Work in well-ventilated area.
Minimize contact with skin and eyes. Wash thoroughly after handling.
STORAGE: Keep containers closed when not in use. Avoid excessive
heat and cold. Do not allow to freeze and avoid direct sunlight.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
OCCUPATIONAL EXPOSURE LIMITS: No assigned limits.
PROTECTIVE MEASURES: People exposed to products containing
natural latex rubber may develop allergic reactions such as skin rashes,
hives, nasal/eye/or sinus symptoms, asthma and possibly shock.
Ammonia vapor may cause burning eyes, running nose, coughing and
possibly chest pain.
RESPIRATORY PROTECTION: No protection is ordinarily required under
normal conditions of use and with adequate ventilation. Use an approved
respirator with organic vapor cartridges, if needed. Respirator selection
and use should be based on contaminant type, form and concentration.
For any spray application or situation where airborne particulates or
aerosol are generated, a supplied air source must be provided.
SKIN PROTECTON: Good industrial hygiene practice to minimize skin
contact. Wear suitable protective clothing and gloves. Wear nitrile or
neoprene gloves.
EYE/FACE PROTECTION: Wear approved safety glasses.
OTHER PROTECTIVE MEASURES: Observe good personal hygiene
measures, such as washing after handling material, especially before
eating, drinking, and smoking.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Off-White, liquid
Odor: Slight odor
Odor Threshold: No data available
pH: 9-11
Melting Point: Not applicable
Freezing Point: No data available
Boiling Point: 212F (100C)
Flash Point: Not applicable
Evaporation Rate: No data available
Flammability Limits: No data available
Vapor Pressure: 760mm @ 212F (100C) (water
phase)
Vapor Density: .63 (water phase)
Relative Density: 0.90 -1.50 @ 77F (25C)
Solubility in Water: Soluble in water
Solubility in Solvent: Insoluble
Partition Coefficient: n-octanol/water: No data available
Auto-ignition Temperature: Not applicable
Decomposition Temperature: No data available
Viscosity: No data available
10. STABILITY AND REACTIVITY
REACTIVITY: No data available
CHEMICAL STABILITY: Stable
POSSIBILITY OF HAZARDOUS REACTION: Will not occur
CONDITIONS TO AVOID: Avoid acids/salts that cause coagulation.
INCOMPATIBLE MATERIALS: Avoid acids/salts that cause coagulation.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal breakdown may
release carbon oxides (dry product). Ammonia (liquid product).
SAFETY DATA SHEET
2
11. TOXICOLOGICAL INFORMATION
ROUTES OF EXPOSURE
INHALATION: No data available
INGESTION: No data available
SKIN CONTACT: No data available
EYE CONTACT: No data available
EYE DAMAGE/EYE IRRITATION: No data available
RESPIRATORY SENSITIZATION/ SKIN SENSITIZER: No data available
SKIN CORROSION/IRRITATION: No data available
ACUTE TOXICITY VALUES:
Acute Toxicity (Oral) Rat: Test Results
LD50: >5,000 mg/kg
(OECD Guideline 423)
Acute Toxicity (Dermal) Rat: Test Results
LD50: >2,000 mg/kg
(OECD Guideline 402)
Acute Toxicity (Inhalation): Test Results
No data available
Conclusion: Virtually non-toxic after a single ingestion. Virtually non-
toxic after a single skin contact.
MUTAGENICITY: No data available
CARCINOGENICITY: No data available
REPRODUCTIVE TOXICITY: No data available
SPECIFIC TARGET ORGAN TOXICITY:
Single Exposure: Based on available information there is no specific
target organ toxicity to be expected after a single exposure.
Repeated Exposure: No data available
ASPIRATION HAZARD: No data available
OTHER INFORMATION: None
12. ECOLOGICAL INFORMATION
ECOTOXICITY: Product is stable in water and can be mechanically
separated from water. The water may be suitable for disposal in a
biological waste water plant.
BIODEGRADATION: No data available
BIOACCUMULATION: No data available
AQUATIC TOXICITY: No data available
MOBILITY: No data available
13. DISPOSAL CONSIDERATONS
Disposal should be made in accordance with federal, state and local
regulations and product characteristics at time of disposal.
14. TRANSPORT INFORMATION
Not regulated for transport in any mode.
EMERGENCY SHIPPING: CHEMTREC 1-(800)-424-9300
15. REGULATORY INFORMATION
Inventory Status: On or in compliance with the inventory for the
following:
Australia AICS:
Canada DSL Inventory List:
China Inventory Existing Chemical Substances (ECSC):
Europe EINECS List:
Japan ENCS List:
Korea Existing Chemicals Inv. (ECL):
Philippines PICCS:
US TSCA Inventory:
New Zealand Inventory of Chemicals:
U.S. Federal Regulatory Information
CERCLA Hazardous Substance List (40 CFR 302.4): None present or
none present in regulated quantities.
Clean Water Act Section 311 Hazardous Substances (40 CFR 117.3):
None present or none present in regulated quantities.
Clean Air Act (CAA) Section 112 (r) Accidental Release Prevention
(40 CFR 68.130): None present or none present in regulated quantities.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D): None
present or none present in regulated quantities.
SARA Title III
Section 302 Extremely Hazardous Substance (40 CFR 355, Appendix
A): None present or none present in regulated quantities.
Section 304 Emergency Release Notification: None present or none
present in regulated quantities.
Section 311, 312 (40 CFR 370): None
Section 313 Toxic Chemicals (40 CFR 372): None present or none
present in regulated quantities.
U.S. State Regulations
California proposition 65 Reproductive Toxins and Carcinogens:
No ingredient regulated.
16. OTHER INFORMATION
HMIS HAZARD IDENTIFICATION:
H-0, F-1, PH-0, PP-B *B-Safety Glasses & Gloves
NFPA HAZARD IDENTIFICATION:
H-0, F-1, R-0
Training Advice: Train personnel using this product in proper chemical
handling, engineering controls and protective equipment.
Recommended Uses and Restrictions: This product is intended for
industrial/professional use only.
SDS Revision Notes: Updating MSDS to 16 section SDS format.
Disclaimer: These data are offered in good faith as typical values and
not as product specifications. No warranty, either expressed or implied, is
made. The recommended industrial hygiene and safe handling
procedures are believed to be generally applicable. However, each user
should review these recommendations in the specific context of the
intended use and determine whether they are appropriate.
Date Prepared/Revised: May 31, 2015; Supersedes: January 14, 2013
by | Sep 27, 2025
SILPAK, Inc sarery para sueer
Product Identifier, RL-464, RL-451-80, RL-SPRAY, RL-BALLOON PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND
RL-564, RLM-460 EMERGENCY PROCEDURES: Wear appropriate protective clothing,
gloves and safely glasses to prevent eye and skin contact.
Use: Molding & Casting Latex Rubber,
Professionalindustial use METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP:
Small Spill: Contain spit. Allow material to air cure.
Company: SILPAK, INC. Large Spill: Dike and contain spill Scrape up or cover with an inert
470 EAST BONITA AVE. POMONA, CA 91767 absorbent material and collect into an appropriate container for disposal.
Phone Number: 909-625-0056, Calcium chloride or similar material can be used to coagulate latex.
Emergency Phone: CHEMTREC 1-(800)-424-9300
ENVIRONMENTAL PRECAUTIONS: None
Ema: silpak@aol.com /=NTENGANOSTOREGE
2. HAZARDS IDENTIFICATION HANDLING: Avoid inhalation of vapors. Work in well-ventilated area.
GHS HAZARD CLASSIFICATION: NON HAZARDOUS Minimize contact with skin and eyes. Wash thoroughly afler handling.
STORAGE: Keep containers closed when not in use. Avold excessive
LABELING ELEMENTS: None Required. heat and cold. Oo not allow to freeze and avoid direct sunlight.
Pree te a cause ten ofthe respi 8: EXPOSURE CONTROL PERSONAL PROTECTION
mmonia vapors may cause irritation of the respiratory tract, eyes and OCCUPATIONAL EXPOSURE LIMITS: No assigned limits
nose. if ingested, can cause nausea, vomiting and gasbic irritation. 4 7 a an
Prolonged oxpostie to latex (igud) may inate skin, PROTECTIVE MEASURES: People exposed to products containing
natural latex rubber may develop allergic reactions such as skin rashes,
. hives, nasalleye/or sinus symptoms, asthma and possibly shock.
SUPPLEMENTAL INFORMATION:
; People exposed to products containing natural fatex rubber may develop Poivinhioiieg cause burning eyes, running nose, coughing and
altergic reactions such as skin rashes, hives, nasaVeye/or sinus – . kon is ordinari
symploms, asthma and possibly shock. Ammonia vapor may cause RESPIRATORY PROTECTION: No protection is ordinal required under
suming eyes, running nese, coughing and possby chest pain normal conditions of use and with adequate ventilation. Use an approved
ing eyes, running nose, coughing and poss: pain. respirator with organic vapor cartridges, if needed. Respirator selection
522A eS TAIT BEA BLES IA ICAO eAIe and use should be based on contaminant type, form and concentration.
3; COMPOSITION INFORMATION ON INGREDIENTS For any spray application or situation where airbome particulates or
Mixture ; ; aerosol are generated, a supplied air source must be provided.
General tnformation: Mixture of Natural latex, additives, filers. SKIN PROTECTON: Good industial hygiene practoe to minimize skin
BB @EKIW ANE KRIBEE contact. Wear suitable protective clothing and gloves. Wear nitile or
4. FIRST AID MEASURES neoprene gloves.
INHALATION: Remove person to fresh alr. Consult a physician. EYEIFACE PROTECTION: Wear approved safety glasses.
SKIN CONTACT: Wash contact area with soap and water. Get medical OTHER PROTECTIVE MEASURES: Observe good personal hygiene
attention if irritation develops or persists. measures, such as washing after handling material, especially before
EYE CONTACT: Immediately fush with water for 15 minutes while eating, drinking, and smoking.
holding eyelids open, Get medical attention ifirritaion develops or e a
persists or if visual changes occur. | PHYSICAL AND SAL PROPERTIE!
INGESTION: Do not induce vomiting. Rinse mouth thoroughly. Consulta EBAYSIGAEAN cH EMIGAL PRE Tiquid s
Physician, Odor: Slight odor
Odor Threshold: No data available
MOST IMPORTANT SYMPTOMSIEFFECTS, ACUTE AND DELAYED: pH: ot
Vapor from Ammonia may cause burning eyes, runny nose, coughing and Melting Point: Not applicable
possibly chest pain. Freezing Point: No data available
7 Boiling Point: 212F (100C)
Notes to Physician: ; . Flash Point: Not applicable
Hazards: No specific recommendations Evaporation Rate: No dala available
Treatment: No specific recommendations Flammability Limits: No dala available
SENSE HIRISIUR IER SIIB ER Vapor Pressure: 760mm @ 212F (400C) (water
6. FIRE-FIGHTING MEASURES phase)
EXTINGUISHING MEDIA: Water, dry chemical, carbon dioxide (CO:), Vapor Density: .63 {waler phase)
and foam. Relative Density: 0.90 -1.50 @ 77F (25C)
UNSUITABLE EXTINGUISHING MEDIA: None known. Sotubility in Water: Soluble in water
UNUSUAL FIRE AND EXPLOSION HAZARDS: Hazardous Solubility in Solvent: Insoluble
decomposition products: Oxides of nitrogen, smoke, soot and carbon Partition Coefficient: n-octanoliwater: No data available
dioxide and carbon monoxide. Auto-ignition Temperature: Not applicable
SPECIAL FIRE FIGHTING PROCEDURES: No specific Decomposition Temperature: No dala available
recommendations, Viscosity: No data available
SPECIAL PROTECTIVE EQUIPMENT & PRECAUTIONS FOR _ _
FIREFIGHTERS: Wear approved positive pressure, self-contained 40: STABILITY.AND REACTIVITY |
breathing apparatus (SCUBA) and full body protective clothing. Use water REACTIVITY: No Gata available =
to cool fre exposed containers and disperse vapors. CHEMICAL STABILITY: Stable
POSSIBILITY OF HAZARDOUS REACTION: Will not occur
CONDITIONS TO AVOID: Avoid acidsisalts that cause coagulation. |
INCOMPATIBLE MATERIALS: Avoid acids/salls that cause coagulation.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal breakdown may
release carbon oxides (dry product). Ammonia (liquid produc!) |
: |
by | Sep 27, 2025
SAFETY DATA SHEET
Date Issued : 11/11/2009
SDS No : RELEASE #78
Date Revised : 11/02/2021
Revision No : 4
RELEASE #78
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: RELEASE #78
GENERAL USE: Release agent
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATIONS
Health:
Aspiration Hazard, Category 1
Skin Irritation, Category 2
Target Organ Toxicity (Single exposure), Category 3
Environmental:
Chronic Hazards to the Aquatic Environment, Category 2
Physical:
Flammable Liquids, Category 2
GHS LABEL
Flame Health hazard Exclamation
mark
Environment
SIGNAL WORD: DANGER
HAZARD STATEMENTS
H225: Highly flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
PRECAUTIONARY STATEMENTS
Prevention:
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P240: Ground and bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/lighting/material-handling equipment.
P242: Use non-sparking tools.
P243: Take action to prevent static discharges.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P271: Use only outdoors or in a well-ventilated area.
P264: Wash thoroughly after handling.
Page 1 of 6
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P273: Avoid release to the environment.
Response:
P370+P378: In case of fire: Use water spray, carbon dioxide, dry chemical, or foam for extinction.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor/physician.
P331: Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312: Call a POISON CENTER/doctor/physician if you feel unwell.
P391: Collect spillage.
Storage:
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P235: Keep cool.
P405: Store locked up.
Disposal:
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS
Naphtha (petroleum), light alkylate 60 – 10064741-66-8
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get
medical advice/attention.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
INGESTION: If swallowed, call a physician immediately. Do NOT induce vomiting. Provided the patient is conscious, wash out mouth with
water. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. Get immediate medical attention.
NOTES TO PHYSICIAN: Symptomatic and supportive therapy as needed. Following severe exposure medical follow-up should be monitored
for at least 48 hours.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Water spray, carbon dioxide, dry chemical, or foam.
HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide and carbon dioxide.
EXPLOSION HAZARDS: Keep away from heat, sparks, and open flame. Vapors are heavier than air and may travel along the ground or be
moved by ventilation and ignited by heat, pilot lights, other flames and ignition sources at locations distant from material handling point.
FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not
release runoff from fire control methods to sewers or waterways.
FIRE FIGHTING EQUIPMENT: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of
unmanned hose holders or monitor nozzles for fighting large fires.
SENSITIVE TO STATIC DISCHARGE: This material can accumulate static charges which can cause an incendiary electrical discharge.
6. ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK PROCEDURES: Evacuate unnecessary personnel from the spill area. Wear necessary personal protective equipment (PPE)
as specified in the SDS or the site emergency response plan. Eliminate all sources of ignition. Ensure adequate ventilation. Dike and contain
spill. Prevent product from entering drains or waterways. Absorb with non-combustible material (such as sand, earth, diatomaceous earth, or
vermiculite) and transfer to a container for disposal according to local/national regulations.
ENVIRONMENTAL PRECAUTIONS
Page 2 of 6
RELEASE #78
WATER SPILL: Do not discharge into drains, surface waters, or groundwater.
GENERAL PROCEDURES: Refer to section 8 of SDS for personal protection details.
RELEASE NOTES: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if
necessary.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Keep away from sources of ignition. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation.
Avoid breathing vapor over open containers. Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
HANDLING: Use appropriate personal protective equipment as specified in Section 8. Handle in a well-ventilated area. Handle and use in a
manner consistent with good industrial/manufacturing techniques and practices.
STORAGE: Store in a dry and well-ventilated place, away from excessive heat in the original or similar container. Avoid sources of ignition and
incompatible materials. Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials. Avoid
unnecessary contact.
STORAGE TEMPERATURE: 65-80 F (18-27 C)
SHELF LIFE: 12 months from date of shipment under manufacturers recommended storage conditions.
ELECTROSTATIC ACCUMULATION HAZARD: This material can accumulate static charges which can cause an incendiary electrical
discharge.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
Chemical Name Type ppm mg/m
3
Naphtha (petroleum), light alkylate
OSHA PEL
TWA 500 –
STEL – –
ACGIH TLV
TWA 300 –
STEL – –
NIOSH REL
TWA – –
STEL – –
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
SKIN: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be used to prevent contact with
eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer maximum protection.
RESPIRATORY: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may be
necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used concurrently
when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
PROTECTIVE CLOTHING: Protective clothing should be selected and used in accordance with “Guidelines for the Selection of Chemical
Protective Clothing” published by ACGIH.
WORK HYGIENIC PRACTICES: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in
immediate work area should be prohibited. Wash hands before eating.
OTHER USE PRECAUTIONS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Training is important. Follow all label precautions.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
Page 3 of 6
RELEASE #78
ODOR: Light hydrocarbon
COLOR: Colorless
pH: Not Applicable
PERCENT VOLATILE: 60-100
FLASH POINT AND METHOD: -8 C (17.6 F) Pensky-Martens CC
LOWER EXPLOSION LIMIT: 0.9%
UPPER EXPLOSION LIMIT: 6.3%
AUTOIGNITION TEMPERATURE: 442.2 C (828 F)
VAPOR PRESSURE: No data available
VAPOR DENSITY: > 1 (Air=1)
BOILING POINT: No data available
SOLUBILITY IN WATER: Negligible
SPECIFIC GRAVITY: 0.71 (water=1) at 21 C (70 F)
VISCOSITY: No data available
(VOC): 426 to 710 g/l Calculated. Theoretical VOC minus water and exempt solvents.
10. STABILITY AND REACTIVITY
REACTIVITY: Hazardous reactions will not occur under normal transport or storage conditions.
STABILITY: This product is stable under normal ambient conditions of temperature and pressure.
CONDITIONS TO AVOID: High temperatures, accumulation of static charges, flames and other possible ignition sources.
POSSIBILITY OF HAZARDOUS REACTIONS: No data available
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide and carbon dioxide.
INCOMPATIBLE MATERIALS: Strong oxidizing agents.
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
Chemical Name ORAL LD50 DERMAL LD50 INHALATION LC 50
Naphtha (petroleum), light alkylate > 5000 mg/kg Rat > 2000 mg/kg Rabbit > 20 mg/l Rat (4 h, vapor)
SKIN CORROSION/IRRITATION: Causes skin irritation.
SERIOUS EYE DAMAGE/IRRITATION: No data available
RESPIRATORY OR SKIN SENSITISATION: No data available
GERM CELL MUTAGENICITY: No data available
REPRODUCTIVE TOXICITY: No data available
STOT-SINGLE EXPOSURE: May cause drowsiness or dizziness.
STOT-REPEATED EXPOSURE: No data available
ASPIRATION HAZARD: May be fatal if swallowed and enters airways.
12. ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Avoid
release to the environment.
CHEMICAL FATE INFORMATION: No data available
BIOACCUMULATION/ACCUMULATION: No data available
ENVIRONMENTAL DATA: This product may cause risk of hazardous effects to the environment.
DISTRIBUTION: No data available
13. DISPOSAL CONSIDERATIONS
Page 4 of 6
RELEASE #78
DISPOSAL METHOD: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed
waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of
environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
EMPTY CONTAINER: Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without proper
instructions. Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed. DO NOT
PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. T HEY MAY EXPLODE AND CAUSE INJURY OR DEATH.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME: Petroleum distillates, n.o.s.
PRIMARY HAZARD CLASS/DIVISION: 3
UN/NA NUMBER: UN1268
PACKING GROUP: II
NAERG: 128
LABEL: Flammable liquid
AIR (ICAO/IATA)
SHIPPING NAME: Petroleum distillates, n.o.s.
UN/NA NUMBER: UN1268
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: II
ERG: 3H
LABEL: Flammable liquid
VESSEL (IMO/IMDG)
SHIPPING NAME: Petroleum distillates, n.o.s.
UN/NA NUMBER: UN1268
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: II
EmS: F-E, S-E
LABEL: Flammable liquid
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZ ATION ACT)
311/312 HEALTH HAZARDS: Acute Health Hazard, Fire Hazard
313 REPORTABLE INGREDIENTS: This product does not contain any substances subject to the reporting requirements of Section 313 of
Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA (COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPE NSATION, AND LIABILITY ACT)
CERCLA REGULATORY: This product does not contain any substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA REGULATORY: This product does not contain any substances subject to TSCA Section 12(b) export notification.
TSCA STATUS: This product or its components are listed in or exempt from the TSCA inventory requirements.
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA )
29 CFR1910.119—PROCESS SAFETY MANAGEMENT OF HIGHL Y HAZARDOUS CHEMICALS: None of the chemicals in this
product are considered highly hazardous by OSHA.
Page 5 of 6
RELEASE #78
CALIFORNIA PROPOSITION 65: This product does not contain any chemicals which are known to the State of California to cause cancer,
birth defects or other reproductive harm.
OSHA HAZARD COMM. RULE: The contents of the SDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS (WORKPLACE HAZARDOUS MATERIALS INFORMATION SY STEM): This product has been classified according to the
hazard criteria of the CPR and the SDS contains all the information required by the CPR.
DOMESTIC SUBSTANCE LIST (INVENTORY): All components in this product are listed in or exempted from the Domestic Substances
List (DSL) or the Non-Domestic Substances List (NDSL).
16. OTHER INFORMATION
REASON FOR ISSUE: Revision
Date Revised: 11/02/2021
REVISION SUMMARY: This SDS replaces the 10/03/2018 SDS.
HMIS RATING
HEALTH 2
FLAMMABILITY 3
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA CODES
3
2 0
HMIS RATINGS NOTES: Personal Protection: See Section 8
MANUFACTURER DISCLAIMER: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc. assumes
no legal responsibility for use or reliance upon this data.
Page 6 of 6
RELEASE #78
