by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS800
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS800_02.21_Issue1
VAC-PAK
HS800
Vacuum bagging film
Ideally suited to high temperature and pressure applications
Features and Benefits
Heat stabilised co-extruded film produced from
modified nylon resin.
Ideal for advanced composite fabrication and
adhesive bonding as well as other high
temperature/pressure applications where softness
and workability are essential.
The co-extrusion process combines multiple layers of
resin flow into film prior to exiting the extrusion die.
This process represents the most advanced state of
the art technology in blown film production.
Can be heat seamed to meet any custom shape
requirements.
PROPERTIES
Maximum use temperature 191 C 375 F
Color Gold tinted
Tensile strength at break (ASTM D882) 83MPa 12000PSI
Elongation at break (ASTM D882) 300%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 4m (open) Up to 180in (open)
Formats available Sheet, V sheet, lay flat tube
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet GS-43MR
High tack and high temperature sealant tape
DESCRIPTION
GS-43MR is our premium sealant tape with excellent tack and easy clean-up. It is usable up to 450 F (232 C).
@ BENEFITS
+ Excellent tack level, so vacuum bagging is easier and safer.
+ High temperature rating for safer high temperature cures.
+ Approved on aerospace specifications worldwide.
@ TECHNICAL DATA
Color Off-white
Base material Synthetic rubber
Maximum use temperature 450 F (232 C)
Shelf life 12 months from date of manufacture
Pen Tape must be stored flat in original packaging at 72 F (22 C)
Storage conditions Do not refrigerate
@ SIZES
1/8 inch x 1/2 inch x 25 feet
(3 mm x12 mm x 7.62m) Drellsparese
1/8 inch x 3/4 inch x 25 feet
@ mmx 19 mm x 7.62 m) aialb pares
@ NOTES
+ For clean removal, it is recommended to strip the tape from the mold surface once it has cooled down to room
temperature.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-03-05
Catalog position : Vacuum bag sealant tapes A
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
_
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
# = Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet GS-213
Industry standard vacuum bag sealant tape for metal and composite tools
[i DESCRIPTION
GS-213 is recognized worldwide as the work horse for the composites and bonding industries. It has excellent
tack, great clean-up, and is usable up to 400 F (204 C).
Hi BENEFITS
+ Excellent tack level, so vacuum bagging is easier and safer.
+ Excellent clean up reduces cost of tool cleaning.
+ Approved on aerospace specifications worldwide.
Mi TECHNICAL DATA
Color Off-white
Base material Synthetic rubber
Maximum use temperature 400 F (204 C)
Shelf life 12 months from date of manufacture
fay Tape must be stored flat in original packaging at 72 F (22 C)
Storage conditions Do not refrigerate
@ = SIZES
1/8 inch x 1/2 inch x 25 feet
(3 mm x 12 mm x 7.62 m) 40 rolls per case
1/8 inch x 3/4 inch x 25 feet
(3mmx 19 mmx 7.62 m) 2prelbpatees
ES Oe
SS =) >
f@ NOTES
+ For clean removal, it is recommended to strip the tape from the mold surface once it has cooled down to
room temperature.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-03-05
Catalog position : Vacuum bag sealant tapes
ste condtion ot meth use ncding serge ate yo ur cet Atech neato dos ot amume any esponsbiy fete pedomance of his mate fay pair. The mate sca
inechPtratonat declan sod buyer wanes ay anda lnpied wares cog waht tae he pe woes of mechan and nese prdcoar ee Te bforason conaed erin
Teper ypc pope ad shoud nt bed ipectcon purpores Any tami proves Yout convene ony. The fica guage Engh an he fica bm Caran USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet GS-213
Industry standard vacuum bag sealant tape for metal and composite tools
DESCRIPTION
GS-213 is recognized worldwide as the work horse for the composites and bonding industries. It has excellent
tack, great clean-up, and is usable up to 400 F (204 C).
@ BENEFITS
+ Excellent tack level, so vacuum bagging is easier and safer.
+ Excellent clean up reduces cost of tool cleaning.
+ Approved on aerospace specifications worldwide.
@ TECHNICAL DATA
Color Off-white
Base material Synthetic rubber
Maximum use temperature 400 F (204 C)
Shelf life 12 months from date of manufacture
Pen Tape must be stored flat in original packaging at 72 F (22 C)
Storage conditions Do not refrigerate
@ SIZES
1/8 inch x 1/2 inch x 25 feet
@ mmx 12 mmx 7.62 m) GO ellis BARES
1/8 inch x 3/4 inch x 25 feet
(mmx 19 mmx 7.62 m) aialb pares
@ NOTES
+ For clean removal, it is recommended to strip the tape from the mold surface once it has cooled down to
room temperature.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-03-05
Catalog position : Vacuum bag sealant tapes A
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
_
