by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet ULTRAWEAVE 1032 & 1332
Nylon non-woven breathers/bleeders
lM DESCRIPTION
All Ultraweave products have a higher temperature softening point and will not compress like polyester allowing for
increased airflow.
Ultraweave 1032 is a heavy duty yet conformable breather which will work with most any autoclave cure and prevent
trap off under the vacuum bag. Ultraweave 1332 is the most reliable heavy duty breather made for high temperature
and pressure autoclave cures. When slit, it can be used as an edge durable breather. Ultraweave 1032 & 1332
eliminate the need for multiple layers of polyester breather.
@ BENEFITS
+ High temperature nylon fibre helps prevent vacuum lock-off.
+ Superior performance to polyester breather in autoclave.
+ Maintains higher vacuum levels for better part quality.
M@ TECHNICAL DATA
Ultraweave 1032 Ultraweave 1332
Maximum use temperature 232 C (450 F) 232 C (450 F)
Fibre type Nylon 6,6 Nylon 6,6
Colour White White
Weight (approx.) 339 g/m? (10 oz/yd ) 441 g/m (13 oz/yd)
Fire retardant Yes Yes
Cromael Recommended Storage temperature is 5 C to 40 C (41 F to 104 F). Store
9 original packaging, do not stack rolls on end.
@ SIZES
pitty | bength | Packaging
Ultraweave 1032 152 cm (60 inches) 45 m (50 yards) Troll
up to 457 cm (180 inches) 45 m (50 yards) Special order
Ultraweave 1332 152 cm (60 inches) 45 m (50 yards) Troll
up to 457 cm (180 inches) 45 m (50 yards) Special order
HM SUSTAINABILITY
Contains PAS
canb ey < >and
We: Cd EE. YI weceane
@ NOTES
+ Material can be slit in special widths upon request (1 standard roll as minimum order quantity).
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Packaging is clear with red print.
Last updated : 2025-05-25
Catalog position : Breathers & Bleeders
ste contin creat ue nding sarge beyond ot conta itech trator oe ese pony for the peonnnce fh mate for ry arr. The mates sols Artech inten ne
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet ULTRAWEAVE 1032 & 1332
Nylon non-woven breathers/bleeders
lM DESCRIPTION
All Ultraweave products have a higher temperature softening point and will not compress like polyester allowing for
increased airflow.
Ultraweave 1032 is a heavy duty yet conformable breather which will work with most any autoclave cure and prevent
trap off under the vacuum bag. Ultraweave 1332 is the most reliable heavy duty breather made for high temperature
and pressure autoclave cures. When slit, it can be used as an edge durable breather. Ultraweave 1032 & 1332
eliminate the need for multiple layers of polyester breather.
@ BENEFITS
+ High temperature nylon fibre helps prevent vacuum lock-off.
+ Superior performance to polyester breather in autoclave.
+ Maintains higher vacuum levels for better part quality.
M@ TECHNICAL DATA
Ultraweave 1032 Ultraweave 1332
Maximum use temperature 232 C (450 F) 232 C (450 F)
Fibre type Nylon 6,6 Nylon 6,6
Colour White White
Weight (approx.) 339 g/m? (10 oz/yd ) 441 g/m (13 oz/yd)
Fire retardant Yes Yes
Cromael Recommended Storage temperature is 5 C to 40 C (41 F to 104 F). Store
9 original packaging, do not stack rolls on end.
@ SIZES
pitty | bength | Packaging
Ultraweave 1032 152 cm (60 inches) 45 m (50 yards) Troll
up to 457 cm (180 inches) 45 m (50 yards) Special order
Ultraweave 1332 152 cm (60 inches) 45 m (50 yards) Troll
up to 457 cm (180 inches) 45 m (50 yards) Special order
HM SUSTAINABILITY
Contains PAS
canb ey < >and
We: Cd EE. YI weceane
@ NOTES
+ Material can be slit in special widths upon request (1 standard roll as minimum order quantity).
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Packaging is clear with red print.
Last updated : 2025-05-25
Catalog position : Breathers & Bleeders
ste contin creat ue nding sarge beyond ot conta itech trator oe ese pony for the peonnnce fh mate for ry arr. The mates sols Artech inten ne
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet TOOLWRIGHT 3 & 5
High Elongation Release Film coated with adhesive
lM DESCRIPTION
Toolwright series is an extruded release film coated with a pressure sensitive adhesive. Toolwright 3 has a thinner film
than Toolwright 5 and can be more easily applied over complex contour surfaces. Provides excellent release from all
common resin systems for multiple releases. Toolwright 3 has high elongation, good tear strength, high temperature
resistance and excellent clean up after removal.
M@ BENEFITS
+ High elongation allows for easier covering of complex surfaces, improving part surface quality.
+ Good adhesion to metal, composite, Tooling block and rubber tooling for longer service life.
+ Tougher film is more tear resistant and so it s easier to stretch over complex shapes without damage.
+ Extend the life of worn tools avoiding cost of new tools.
@ TECHNICAL DATA
Toolwright 3 Toolwright 5
Maximum use temperature 260 C (500 F) 260 C (500 F)
Carrier type Extruded fluoropolymer Extruded fluoropolymer
Adhesive type Silicone Silicone
Elongation at break 350% 350%
Colour Light orange Light orange
Total thickness 75 jum (0.003 inch) 125 ym (0.005 inch)
Film thickness 50 um (0.002 inch) 100 yum (0.004 inch)
Adhesive thickness 25 um (0.001 inch) 25 um (0.001 inch)
Shelf life 18 months from date of shipment when stored in the
original packaging at 22 C (72 F)
@ SIZES
Toolwright 3 Toolwright 5
127 cm – 16.5 m (50 inches – 18 yards) 117 cm – 16.5 m (46 inches – 18 yards)
+ Other widths available, please contact Airtech for more information.
SUSTAINABILITY
CC a) canbe <4 Recyclable
-used packaging
re-use VP
@ NOTES
+ Toolwright 3R & Toolwright 5R also available with rubber adhesive, allowing Toolwright to be used
without risk of silicone contamination such as moulding off parts for reverse tool manufacture.
+ Toolwright should be applied by carefully lifting the edge of the backing, then applying the adhesive
side to the mould surface. The remainder of backing should then be carefully removed while pressing
the Toolwright onto the mould surface with an Airsweep or other straight edge. A vacuum bag can then
be applied to remove any residual air. A cure cycle under vacuum will provide the best results.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is
process specific, Airtech recommends testing prior to use.
Last updated : 2025-02-07
Catalog position : Pressure sensitive tapes
ste contin creo ue nding sarge eyed ot conta itech trator doe tse pony for the pevomnance fh mae for ry arr. The mates sols Artech inteton n
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet TOOLTEC CS5
High elongation PTFE film coated with silicone adhesive
DESCRIPTION
Tooltec CSS is a PTFE film coated with a high temperature silicone pressure sensitive adhesive. It can be used
to seal masters and leaky tool surfaces while providing semi-permanent and contamination free part release.
Tooltec CS5 is a non-reinforced mold surface reconditioning tape allowing conformance to complex contours
and providing a semi-permanent release for contoured shapes.
@ BENEFITS
+ Provides semi-permanent release saving time spent cleaning tooling and reapplying release agents.
+ Good elongation, so complex tools can be reconditioned and master models finished for molding.
+ Improve tool surface finish and aid resin flow for better part surface finish and reduced hand finishing.
@ TECHNICAL DATA
Maximum use temperature 500 F (260 C)
Carrier type PTFE
Adhesive type Silicone
Color Light brown
Total thickness 0.0065 inch (165 um)
Film thickness 0.005 inch (127 pm)
Adhesive thickness 0.0015 inch (38 pm)
Elongation at break 300 %
Shelf life 18 months from date of shipment when
stored in original packaging at 72 F (22 C)
COMMONLY USED SIZES
36 inches (91 cm) 18 yards (16.5 m)
48 inches (122 cm) 18 yards (16.5 m)
+ Other sizes available on special order.
@ NOTES
+ Tooltec CS5 should be applied by carefully lifting the edge of the backing, then applying the adhesive
side to the mold surface. The remainder of backing should then be carefully removed while pressing the
Tooltec CS5 onto the mold surface with an Airsweep or other straight edge. A vacuum bag can then be
applied to remove any residual air. A cure cycle under vacuum will provide the best results.
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2019-10-07
Catalog position : Pressure sensitive tapes 7
the conditions or methods fuse Inching storage, ae beyond out contol Artech Intemational does not ese ay regan othe performance of material fo any para we Te mate soda
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
presents ypcal properter and shold not be uted fr speciation purpose Any tandton pred for your convenience ony The ofl language sEngish andthe ofl wie alors USA
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet TOOLTEC A005, A007 & A012
Reinforced PTFE coated fibreglass with silicone adhesive
lM DESCRIPTION
Tooltec pressure sensitive tapes are designed to adhere to tool surfaces providing semi-permanent release and a
reconditioned surface. It can be used on all types of moulds, press platens, caul sheets or any surface that comes in
contact with resins or adhesives. Release agents are not required on the mould surface thereby reducing cost and
parts contamination. Tooltec are reinforced mould surface reconditioning tapes providing a semi-permanent release
for flat tools. These products come standard with a silicone pressure adhesive, but can also be supplied with an acrylic
adhesive by special order.
@ BENEFITS
+ Provide semi-permanent release saving time spent cleaning tooling and reapplying release agents.
+ Can be used to recondition worn or damaged tools for extended service, avoiding cost of remanufacture.
+ Improve tool surface finish and aid resin flow for better part surface finish and reduced hand finishing.
@ TECHNICAL DATA
Tooltec A005 Tooltec A007 Tooltec A012
Maximum use temperature 260 C (500 F) 260 C (500 F) 260 C (500 F)
Carrier type PTFE/ Glass PTFE/ Glass PTFE/ Glass
Adhesive type Silicone Silicone Silicone
Colour Light brown Light brown Light brown
Total thickness 125 ym (0.005 inch) 175 ym (0.007 inch) 304 um (0.012 inch)
Film thickness 75 ym (0.003 inch) 125 yum (0.005 inch) 254 um (0.010 inch)
Adhesive thickness 50 um (0.002 inch) 50 um (0.002 inch) 50 um (0.002 inch)
Shelf life 18 months from date of shipment when stored in
original packaging at 22 C (72 F)
@ SIZES
Tooltec A005 Tooltec A007 Tooltec A012
2.54 cm – 33 m (1″ – 36 yards) 2.54 cm – 33 m (1″- 36 yards) –
5.08 cm – 33 m (2″ – 36 yards) 5.08 cm – 33 m (2″ – 36 yards) –
91 cm – 16.5 m (36″- 18 yards) 91 cm – 16.5 m (36″ – 18 yards) 91 cm – 16.5 m (36″ – 18 yards)
122 cm – 16.5 m (48″ – 18 yards) 122 cm – 16.5 m (48″ – 18 yards) –
+ Other sizes available on special order.
SUSTAINABILITY
CC a) canbe <4 Recyclable
-used packaging
re-use VP
@ NOTES
+ Tooltec should be applied by carefully lifting the edge of the backing, then applying the adhesive side
to the mould surface. The remainder of backing should then be carefully removed while pressing the
Tooltec onto the mould surface with an Airsweep or other straight edge. A vacuum bag can then be
applied to remove any residual air. A cure cycle under vacuum will provide the best results.
+ Colour variations are due to sizing and sintering process and have no relationship to % of PTFE content.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2025-02-07
Catalog position : Pressure sensitive tapes
ste contin creo ue nding sarge eyed ot conta itech trator doe tse pony for the pevomnance fh mae for ry arr. The mates sols Artech inteton n
by | Sep 27, 2025
5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
f Si CA92647 USA
INTERNATIONAL INC.
Data Sheet TOOLTEC A005, A007 & A012
Reinforced PTFE coated fibreglass with silicone adhesive
lM DESCRIPTION
Tooltec pressure sensitive tapes are designed to adhere to tool surfaces providing semi-permanent release and a
reconditioned surface. It can be used on all types of moulds, press platens, caul sheets or any surface that comes in
contact with resins or adhesives. Release agents are not required on the mould surface thereby reducing cost and
parts contamination. Tooltec are reinforced mould surface reconditioning tapes providing a semi-permanent release
for flat tools. These products come standard with a silicone pressure adhesive, but can also be supplied with an acrylic
adhesive by special order.
@ BENEFITS
+ Provide semi-permanent release saving time spent cleaning tooling and reapplying release agents.
+ Can be used to recondition worn or damaged tools for extended service, avoiding cost of remanufacture.
+ Improve tool surface finish and aid resin flow for better part surface finish and reduced hand finishing.
@ TECHNICAL DATA
Tooltec A005 Tooltec A007 Tooltec A012
Maximum use temperature 260 C (500 F) 260 C (500 F) 260 C (500 F)
Carrier type PTFE/ Glass PTFE/ Glass PTFE/ Glass
Adhesive type Silicone Silicone Silicone
Colour Light brown Light brown Light brown
Total thickness 125 ym (0.005 inch) 175 ym (0.007 inch) 304 um (0.012 inch)
Film thickness 75 ym (0.003 inch) 125 yum (0.005 inch) 254 um (0.010 inch)
Adhesive thickness 50 um (0.002 inch) 50 um (0.002 inch) 50 um (0.002 inch)
Shelf life 18 months from date of shipment when stored in
original packaging at 22 C (72 F)
@ SIZES
Tooltec A005 Tooltec A007 Tooltec A012
2.54 cm – 33 m (1″ – 36 yards) 2.54 cm – 33 m (1″- 36 yards) –
5.08 cm – 33 m (2″ – 36 yards) 5.08 cm – 33 m (2″ – 36 yards) –
91 cm – 16.5 m (36″- 18 yards) 91 cm – 16.5 m (36″ – 18 yards) 91 cm – 16.5 m (36″ – 18 yards)
122 cm – 16.5 m (48″ – 18 yards) 122 cm – 16.5 m (48″ – 18 yards) –
+ Other sizes available on special order.
SUSTAINABILITY
CC a) canbe <4 Recyclable
-used packaging
re-use VP
@ NOTES
+ Tooltec should be applied by carefully lifting the edge of the backing, then applying the adhesive side
to the mould surface. The remainder of backing should then be carefully removed while pressing the
Tooltec onto the mould surface with an Airsweep or other straight edge. A vacuum bag can then be
applied to remove any residual air. A cure cycle under vacuum will provide the best results.
+ Colour variations are due to sizing and sintering process and have no relationship to % of PTFE content.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2025-02-07
Catalog position : Pressure sensitive tapes
ste contin creo ue nding sarge eyed ot conta itech trator doe tse pony for the pevomnance fh mae for ry arr. The mates sols Artech inteton n
by | Sep 27, 2025
Resin infusion products
Toolfusion 3A/ 3B
High temperature infusion resin with low initial cure temperature
Toolfusion 3A/ 3B is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite molds. Toolfusion 3A/ 3B
has a low initial cure temperature of 120 F (49 C) and can be post cured to achieve a high glass transition temperature of 425 F (218 C). Void
contents of less than 1% are achievable. Toolfusion 3A/ 3B will work in various RTM and VARTM processes including single and double bag
arrangements to produce autoclave quality laminates.
Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration
costs, no autoclave running costs.
Low initial cure temperature for low thermal expansion e ect during curing and ability to use low cost master
model materials.
Nano technology delivers outstanding toughness & high Tg. (425 F or 218 C) for long tool life and reduced life
cycle cost.
Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
In comparison to metallic tools, Toolfusion 3A /3B composite tools are lighter weight for easier
manual handing.
In comparison to metallic tooling, Toolfusion 3A/ 3B composite tools have faster heat up and cool down
rates for reduced production costs.
Toolfusion 3A/ 3B composite tooling laminates have vacuum integrity for vacuum bag processing of parts in
oven and autoclave.
Test method
Material type Epoxy
Color Black : Clear (A : B)
Mix ratio by weight 100 : 85 (A : B)
Pot life 300 minutes (100 g at 72 F or 22 C)
DESCRIPTION
BENEFITS
TECHNICAL DATA
Viscosity (initial at 72 F or 22 C) 450 cps
Density (mixed) 1.13 g/cm
Glass transition temperature 425 F (218 C)
Hardness 89 Barcol ASTM D2583
Shrinkage 0.9%
Shelf life 12 months from date of shipment when stored in
original packaging at 72 F (22 C)
Packaging Part A Packaging Part B Weight Part A Weight Part B
5 gallons 5 gallons 45 lbs (20.4 kg) 40 lbs (18.1 kg)
Initial cure:
Cure laminate on master model with full vacuum applied.
Raise temperature to 120 F (49 C) and hold for 12 hours.
Remove vacuum bagging materials and attach back-up structure if required.
Carefully remove the laminate continue with post cure.
Post cure schedule:
Ramp to 150 F (65 C) and hold for 60 minutes.
Ramp to 200 F (93 C) and hold for 60 minutes.
Ramp to 250 F (121 C) and hold for 60 minutes.
Ramp to 300 F (149 C) and hold for 60 minutes.
Ramp to 350 F (177 C) and hold for 60 minutes.
Ramp to 400 F (204 C) and hold for 120 minutes.
3
SIZES
CURING DATA
Last updated : 2020-08-26
Print this page Download this page Print SDS Download SDS
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance
of this material for any particular use. The material is sold “as is”. Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties,
including without limitation the implied warranties of merchantability and of tness for particular use. The information contained herein represents typical
properties and should not be used for speci cation purposes. Any translation is provided for your convenience only. The o cial language is English and the
o cial law is California, USA.
Part A and Part B are sold separately.
NOTES
previous next
by | Sep 27, 2025
Resin infusion products
Toolfusion 3A/ 3B
High temperature infusion resin with low initial cure temperature
Toolfusion 3A/ 3B is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite molds. Toolfusion 3A/ 3B
has a low initial cure temperature of 120 F (49 C) and can be post cured to achieve a high glass transition temperature of 425 F (218 C). Void
contents of less than 1% are achievable. Toolfusion 3A/ 3B will work in various RTM and VARTM processes including single and double bag
arrangements to produce autoclave quality laminates.
Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration
costs, no autoclave running costs.
Low initial cure temperature for low thermal expansion e ect during curing and ability to use low cost master
model materials.
Nano technology delivers outstanding toughness & high Tg. (425 F or 218 C) for long tool life and reduced life
cycle cost.
Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
In comparison to metallic tools, Toolfusion 3A /3B composite tools are lighter weight for easier
manual handing.
In comparison to metallic tooling, Toolfusion 3A/ 3B composite tools have faster heat up and cool down
rates for reduced production costs.
Toolfusion 3A/ 3B composite tooling laminates have vacuum integrity for vacuum bag processing of parts in
oven and autoclave.
Test method
Material type Epoxy
Color Black : Clear (A : B)
Mix ratio by weight 100 : 85 (A : B)
Pot life 300 minutes (100 g at 72 F or 22 C)
DESCRIPTION
BENEFITS
TECHNICAL DATA
Viscosity (initial at 72 F or 22 C) 450 cps
Density (mixed) 1.13 g/cm
Glass transition temperature 425 F (218 C)
Hardness 89 Barcol ASTM D2583
Shrinkage 0.9%
Shelf life 12 months from date of shipment when stored in
original packaging at 72 F (22 C)
Packaging Part A Packaging Part B Weight Part A Weight Part B
5 gallons 5 gallons 45 lbs (20.4 kg) 40 lbs (18.1 kg)
Initial cure:
Cure laminate on master model with full vacuum applied.
Raise temperature to 120 F (49 C) and hold for 12 hours.
Remove vacuum bagging materials and attach back-up structure if required.
Carefully remove the laminate continue with post cure.
Post cure schedule:
Ramp to 150 F (65 C) and hold for 60 minutes.
Ramp to 200 F (93 C) and hold for 60 minutes.
Ramp to 250 F (121 C) and hold for 60 minutes.
Ramp to 300 F (149 C) and hold for 60 minutes.
Ramp to 350 F (177 C) and hold for 60 minutes.
Ramp to 400 F (204 C) and hold for 120 minutes.
3
SIZES
CURING DATA
Last updated : 2020-08-26
Print this page Download this page Print SDS Download SDS
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance
of this material for any particular use. The material is sold “as is”. Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties,
including without limitation the implied warranties of merchantability and of tness for particular use. The information contained herein represents typical
properties and should not be used for speci cation purposes. Any translation is provided for your convenience only. The o cial language is English and the
o cial law is California, USA.
Part A and Part B are sold separately.
NOTES
previous next
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtechintl.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet TEFLEASE MG2
High temperature PTFE pressure sensitive tape
DESCRIPTION
Teflease MG2 is a PTFE film coated with a silicone adhesive. Teflease MG tapes will release from most resin
systems. They are ideal for use on tooling blocks and all areas where high elongation and release is needed.
Teflease MG tapes will form to critical contours and mold surfaces while offering multiple releases or may be
used to cover multiple detail mold seams. They provide a semi-permanent release on cured Airpad tooling
rubber and Aircast 3700 pressure intensifiers and mandrels.
@ BENEFITS
+ Provides semi-permanent release and superior surface finish, saving time and improving quality.
+ Protect rubber tooling mandrels and intensifiers from resin attack, extending tool life and reducing cost.
+ Good elongation makes application to complex shapes easier, reducing time and improving quality.
@ TECHNICAL DATA
Maximum use temperature 500 F (260 C)
Carrier type PTFE
Adhesive type Silicone
Color Light brown
Total thickness 0.0035 inch (88 1m)
Film thickness 0.002 inch (50 jum)
Adhesive thickness 0.0015 inch (38 pm)
Elongation at break 125 %
Shelf life 18 months from date of shipment when
stored in original packaging at 72 F (22 C)
COMMONLY USED SIZES
1 inch (2.54 cm) 36 yards (33 m) 60 rolls per case
2 inches (5.08 cm) 36 yards (33 m) 30 rolls per case
+ Broken cases and other widths available on special order.
+ Other thickness available:
MG3 – 0.0045 inch (115 tm) total thickness
MG5 – 0.0065 inch (165 tm) total thickness
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2019-10-07
Catalog position : Pressure sensitive tapes
-Asthecondton or methods fuse, lncluing storage ae beyond our control Altech tration nc does ot sume any espns fe the performance of his material for any parca ue. The mater sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtechintl.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtechonline.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet TEFLEASE MG2
High temperature PTFE pressure sensitive tape
DESCRIPTION
Teflease MG2 is a PTFE film coated with a silicone adhesive. Teflease MG tapes will release from most resin
systems. They are ideal for use on tooling blocks and all areas where high elongation and release is needed.
Teflease MG tapes will form to critical contours and mold surfaces while offering multiple releases or may be
used to cover multiple detail mold seams. They provide a semi-permanent release on cured Airpad tooling
rubber and Aircast 3700 pressure intensifiers and mandrels.
@ BENEFITS
+ Provides semi-permanent release and superior surface finish, saving time and improving quality.
+ Protect rubber tooling mandrels and intensifiers from resin attack, extending tool life and reducing cost.
+ Good elongation makes application to complex shapes easier, reducing time and improving quality.
@ TECHNICAL DATA
Maximum use temperature 500 F (260 C)
Carrier type PTFE
Adhesive type Silicone
Color Light brown
Total thickness 0.0035 inch (88 1m)
Film thickness 0.002 inch (50 jum)
Adhesive thickness 0.0015 inch (38 pm)
Elongation at break 125 %
Shelf life 18 months from date of shipment when
stored in original packaging at 72 F (22 C)
COMMONLY USED SIZES
1 inch (2.54 cm) 36 yards (33 m) 60 rolls per case
2 inches (5.08 cm) 36 yards (33 m) 30 rolls per case
+ Broken cases and other widths available on special order.
+ Other thickness available:
MG3 – 0.0045 inch (115 tm) total thickness
MG5 – 0.0065 inch (165 tm) total thickness
@ NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2019-10-07
Catalog position : Pressure sensitive tapes
-Asthecondton or methods fuse, lncluing storage ae beyond our control Altech tration nc does ot sume any espns fe the performance of his material for any parca ue. The mater sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA
