by | Sep 27, 2025
THE WORLD LEADER IN CLEAN AIR SOLUTIONS
% /
FIBERGLASS PAINT ARRESTOR PADS er ) : ee
* Effectively removes paint overspray Open Weave Fiber Pattern Z (~ i a Bis sie, f
solids of all types lacquer, air dry, Holds More Paint / ae =
or baked enamel AG-28 pads are designed = & = | |
exclusively to collect paint be 2 wl | aly
* Protects exhaust ducts, fans, and overspray. They are made from is no
motors from paint buildup continuous filament glass fibers 2 ~ kas
with an open weave pattern that is vas LI
* Clean exhaust air is discharged to allows particles to penetrate deep
the atmosphere into the pad. Paint is collected throughout the full depth, extending pad life and
reducing costs. A skin backing on the air leaving side serves as a final barrier to
Economical to use prevent paint and other coatings from penetrating through the media.
Smooth Airflow Through Booth Prevents Fogging
A specially formulated thermoset resin provides high compression strength,
Lightly Loaded Air preventing AG-28 pads from collapsing and face-loading as they become
Entering Side
Close-up photo saturated. Air continues to flow smoothly through the pads, preventing
shows open weave fogging or misting of paint particles in the booth. Overspray is drawn into
pattern that allows the pads so that it does not settle on spray guns, walls, floors, or conveyors.
overspray to Proper airflow ensures healthier working conditions in conformance to
penetrate deep into
the pad. OSHA standards.
Heavily Loaded Alr Cleaner Exhaust Air Fewer Maintenance,
Entering Side Environmental Problems
ores ooedoad Continuous filament glass fibers force paint laden air to change directions
illustrates the large many times as it passes through the pad. Paint particles, unable to follow the
holding capacity of continuously weaving air stream, collect on the fibers. Cleaner exhaust air flows
each fiber. The open on through
space between 9h.
Bers continues to Maintenance problems and the hazards of fire are reduced because fans,
eri airflo
ae stows panto motors, and ducts do not accumulate layers of paint. Cleaner air is discharged
penetrate. to the atmosphere, protecting the local environment from unintentional
dusting and costly property damage.
Heavily Loaded
Groas-Section Fast, Easy Installation and Removal
Cross-section view
shows how the An entire bank of AG-28 pads can be changed in a few minutes. They fit into
aon Sized standard holding frames, with no new grids or other accessories needed.
by collecting paint AG-28 pads are directly interchangeable with other types of paint arrestors.
throughout the full Only one AG-28 pad is required per frame, including installations where two
depth, paper pads are currently used.
ADF Flondow
by | Sep 27, 2025
yber
(866) 260-6457 Ory
Tooling Waxes & Clays www.Rjmarshall.com tude
rr
Tooling Wax & Clay
Rhino Extrudable Wax Tooling Wax Saas
Cast polymer manufacturers have long recognized the benefits Tooling Wax is used to create a smooth [Jap
of using wax fillets in setting up molds for production. The _radius between the edge of a floating bowl Sy
smooth radii and ease of finishing from wax provide significant _ mold and the surface of the vanity deck on –
benefits to the user compared to clay. Gruber Supplies & which it is positioned. Available in a 1b a 4
Accessories has developed an extrudable wax that combines the roll, 2Ib boxes and case quantities. –
flexibility of clay and the quality of wax. Our wax is available
in 5 x 1 sticks. Order Information
#1 – 1/16 – 1b Roll – #01037
Order Information bee uae #1 – 1/16 – 2lb Roll – #01038
Ex-hard 2lb box – #SP1018 Bek #2 – 1/8 1 Ib Roll – #01039
Ex-hard 24lb case – #SP1019. | #2 – 1/8 – 2Ib Box – #01040
Hard 2b box – #SP1020 Hee | #2 – 1/8 – 2Ib – Case of 20 Rolls – #010400
Hard 24lb case – #SP1021 ang) a #3 – 3/16 – lb Roll – #01041
Soft 2lb box – #SP1022 #3 – 3/16 – 2lb Box – #01042
Soft 24lb case – #SP1023 ee #3 – 3/16″ – 2lb – Case of 20 Rolls – #010420
Ex-Soft 2lb box – #SP1024 perme
Ex-Soft 24lb case – # SP1025 . EX-Wax
. This Gruber Supplies & Accessories extrudable fillet material
Tooling Clay offers the best characteristics of both fillet wax and modeling
Tooling Clay is used for the same purposes as Ex-Wax and clay. EX-Wax leaves a smooth radius, doesn t contain solvents,
Tooling Wax – to create a smooth radius between the edge ofa _ tools easily and is extrudable. A box contains 12 sticks and
floating bowl mold and the surface of the vanity deck on which _ weighs 2Ibs. A case contains 12 boxes of 12 sticks each, or 144
itis positioned. Like Ex-Wax, no special pps total sticks.
applicator tools or heat are required | (== ==
in its use. The clay can be extruded in of i Order Information
the size required through the Clay/ =~ Super Extra Soft – Case/12 Boxes – #02218
Wax Extruder. Packaged in 20 stick – eo Fite Sy Soft – Case/12 Boxes – #02214
Slb boxes or 200 stick – 50lb boxes of |= Ste > Hard – Case/12 Boxes – #02216
individually wrapped 4 oz sticks. = DuraHard – Case/12 Boxes – #02219
Super Soft – Box/12 Sticks – #02223
Order Information Soft – Box/12 Sticks – #02213
Tooling Clay Soft – 5lb Box – #02209A. Hard – Box/12 Sticks – #02215
Tooling Clay Soft – 501b Case – #02210A, DuraHard – Box/12 Sticks – #02220
Tooling Clay Hard – 5lb Box – #02209
Tooling Clay Hard – 50Ib Case – #02210
Applicators & Accessories
Waxing (Radius) Tools Clay/Wax Extruder s |
Create a smooth, clean wax radius around the edge of your & Parts Bist res = fh
mords en a deck surface with these handy, simple, radius hand The Pneumatic or Manual & oo ~ oe 4
tools that worl Clay Extruder offers a | :
convenient way to quickly Aug see
create an exacting bead of = ay
q 3 wax or clay for mold setup. RE ae Bee
Order Information Order Information edt
#1 (1/4-1/8 Radius) – Ea – #01031 I Manual Extruder – Ea – #100005
#2 (1/2-3/8 Radius) – Ea – #01032 Pneumatic Extruder – Ea – #100017
#3 (3/4-5/8 Radius) – Ea – #01033 f Related Accessories:
Kit, Nozzle, Clay Extruder (Set/3) – #100012
Clay Extruder Light Bulb – Ea – #100013
z Pneumatic Extruder Teflon Scraper – Ea – #100021
Pneumatic Clay Extruder Tube – Ea – #1000214
-16- Rev. 2
by | Sep 27, 2025
yber
(866) 260-6457 Ory
Tooling Waxes & Clays www.Rjmarshall.com tude
rr
Tooling Wax & Clay
Rhino Extrudable Wax Tooling Wax Saas
Cast polymer manufacturers have long recognized the benefits Tooling Wax is used to create a smooth [Jap
of using wax fillets in setting up molds for production. The _radius between the edge of a floating bowl Sy
smooth radii and ease of finishing from wax provide significant _ mold and the surface of the vanity deck on –
benefits to the user compared to clay. Gruber Supplies & which it is positioned. Available in a 1b a 4
Accessories has developed an extrudable wax that combines the roll, 2Ib boxes and case quantities. –
flexibility of clay and the quality of wax. Our wax is available
in 5 x 1 sticks. Order Information
#1 – 1/16 – 1b Roll – #01037
Order Information bee uae #1 – 1/16 – 2lb Roll – #01038
Ex-hard 2lb box – #SP1018 Bek #2 – 1/8 1 Ib Roll – #01039
Ex-hard 24lb case – #SP1019. | #2 – 1/8 – 2Ib Box – #01040
Hard 2b box – #SP1020 Hee | #2 – 1/8 – 2Ib – Case of 20 Rolls – #010400
Hard 24lb case – #SP1021 ang) a #3 – 3/16 – lb Roll – #01041
Soft 2lb box – #SP1022 #3 – 3/16 – 2lb Box – #01042
Soft 24lb case – #SP1023 ee #3 – 3/16″ – 2lb – Case of 20 Rolls – #010420
Ex-Soft 2lb box – #SP1024 perme
Ex-Soft 24lb case – # SP1025 . EX-Wax
. This Gruber Supplies & Accessories extrudable fillet material
Tooling Clay offers the best characteristics of both fillet wax and modeling
Tooling Clay is used for the same purposes as Ex-Wax and clay. EX-Wax leaves a smooth radius, doesn t contain solvents,
Tooling Wax – to create a smooth radius between the edge ofa _ tools easily and is extrudable. A box contains 12 sticks and
floating bowl mold and the surface of the vanity deck on which _ weighs 2Ibs. A case contains 12 boxes of 12 sticks each, or 144
itis positioned. Like Ex-Wax, no special pps total sticks.
applicator tools or heat are required | (== ==
in its use. The clay can be extruded in of i Order Information
the size required through the Clay/ =~ Super Extra Soft – Case/12 Boxes – #02218
Wax Extruder. Packaged in 20 stick – eo Fite Sy Soft – Case/12 Boxes – #02214
Slb boxes or 200 stick – 50lb boxes of |= Ste > Hard – Case/12 Boxes – #02216
individually wrapped 4 oz sticks. = DuraHard – Case/12 Boxes – #02219
Super Soft – Box/12 Sticks – #02223
Order Information Soft – Box/12 Sticks – #02213
Tooling Clay Soft – 5lb Box – #02209A. Hard – Box/12 Sticks – #02215
Tooling Clay Soft – 501b Case – #02210A, DuraHard – Box/12 Sticks – #02220
Tooling Clay Hard – 5lb Box – #02209
Tooling Clay Hard – 50Ib Case – #02210
Applicators & Accessories
Waxing (Radius) Tools Clay/Wax Extruder s |
Create a smooth, clean wax radius around the edge of your & Parts Bist res = fh
mords en a deck surface with these handy, simple, radius hand The Pneumatic or Manual & oo ~ oe 4
tools that worl Clay Extruder offers a | :
convenient way to quickly Aug see
create an exacting bead of = ay
q 3 wax or clay for mold setup. RE ae Bee
Order Information Order Information edt
#1 (1/4-1/8 Radius) – Ea – #01031 I Manual Extruder – Ea – #100005
#2 (1/2-3/8 Radius) – Ea – #01032 Pneumatic Extruder – Ea – #100017
#3 (3/4-5/8 Radius) – Ea – #01033 f Related Accessories:
Kit, Nozzle, Clay Extruder (Set/3) – #100012
Clay Extruder Light Bulb – Ea – #100013
z Pneumatic Extruder Teflon Scraper – Ea – #100021
Pneumatic Clay Extruder Tube – Ea – #1000214
-16- Rev. 2
by | Sep 27, 2025
yber
(866) 260-6457 Ory
Tooling Waxes & Clays www.Rjmarshall.com tude
rr
Tooling Wax & Clay
Rhino Extrudable Wax Tooling Wax Saas
Cast polymer manufacturers have long recognized the benefits Tooling Wax is used to create a smooth [Jap
of using wax fillets in setting up molds for production. The _radius between the edge of a floating bowl Sy
smooth radii and ease of finishing from wax provide significant _ mold and the surface of the vanity deck on –
benefits to the user compared to clay. Gruber Supplies & which it is positioned. Available in a 1b a 4
Accessories has developed an extrudable wax that combines the roll, 2Ib boxes and case quantities. –
flexibility of clay and the quality of wax. Our wax is available
in 5 x 1 sticks. Order Information
#1 – 1/16 – 1b Roll – #01037
Order Information bee uae #1 – 1/16 – 2lb Roll – #01038
Ex-hard 2lb box – #SP1018 Bek #2 – 1/8 1 Ib Roll – #01039
Ex-hard 24lb case – #SP1019. | #2 – 1/8 – 2Ib Box – #01040
Hard 2b box – #SP1020 Hee | #2 – 1/8 – 2Ib – Case of 20 Rolls – #010400
Hard 24lb case – #SP1021 ang) a #3 – 3/16 – lb Roll – #01041
Soft 2lb box – #SP1022 #3 – 3/16 – 2lb Box – #01042
Soft 24lb case – #SP1023 ee #3 – 3/16″ – 2lb – Case of 20 Rolls – #010420
Ex-Soft 2lb box – #SP1024 perme
Ex-Soft 24lb case – # SP1025 . EX-Wax
. This Gruber Supplies & Accessories extrudable fillet material
Tooling Clay offers the best characteristics of both fillet wax and modeling
Tooling Clay is used for the same purposes as Ex-Wax and clay. EX-Wax leaves a smooth radius, doesn t contain solvents,
Tooling Wax – to create a smooth radius between the edge ofa _ tools easily and is extrudable. A box contains 12 sticks and
floating bowl mold and the surface of the vanity deck on which _ weighs 2Ibs. A case contains 12 boxes of 12 sticks each, or 144
itis positioned. Like Ex-Wax, no special pps total sticks.
applicator tools or heat are required | (== ==
in its use. The clay can be extruded in of i Order Information
the size required through the Clay/ =~ Super Extra Soft – Case/12 Boxes – #02218
Wax Extruder. Packaged in 20 stick – eo Fite Sy Soft – Case/12 Boxes – #02214
Slb boxes or 200 stick – 50lb boxes of |= Ste > Hard – Case/12 Boxes – #02216
individually wrapped 4 oz sticks. = DuraHard – Case/12 Boxes – #02219
Super Soft – Box/12 Sticks – #02223
Order Information Soft – Box/12 Sticks – #02213
Tooling Clay Soft – 5lb Box – #02209A. Hard – Box/12 Sticks – #02215
Tooling Clay Soft – 501b Case – #02210A, DuraHard – Box/12 Sticks – #02220
Tooling Clay Hard – 5lb Box – #02209
Tooling Clay Hard – 50Ib Case – #02210
Applicators & Accessories
Waxing (Radius) Tools Clay/Wax Extruder s |
Create a smooth, clean wax radius around the edge of your & Parts Bist res = fh
mords en a deck surface with these handy, simple, radius hand The Pneumatic or Manual & oo ~ oe 4
tools that worl Clay Extruder offers a | :
convenient way to quickly Aug see
create an exacting bead of = ay
q 3 wax or clay for mold setup. RE ae Bee
Order Information Order Information edt
#1 (1/4-1/8 Radius) – Ea – #01031 I Manual Extruder – Ea – #100005
#2 (1/2-3/8 Radius) – Ea – #01032 Pneumatic Extruder – Ea – #100017
#3 (3/4-5/8 Radius) – Ea – #01033 f Related Accessories:
Kit, Nozzle, Clay Extruder (Set/3) – #100012
Clay Extruder Light Bulb – Ea – #100013
z Pneumatic Extruder Teflon Scraper – Ea – #100021
Pneumatic Clay Extruder Tube – Ea – #1000214
-16- Rev. 2
by | Sep 27, 2025
5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet AIRSWEEP R2 & R3
Composite laminating tools for prepregs and fabrics
DESCRIPTION
Airsweep R2 & R3 are composite laminating tools for placement of prepregs and fabrics onto molds. Airsweep.
R2 & R3 have been ergonomically designed to fit the hand more comfortably, so even pressure can be applied
into sharp corners easily with reduced operator fatigue. These products are manufactured from abrasion
resistant non-contaminating UHMW PE and nylon.
@ BENEFITS
+ Apply even pressure accurately to tight corners to eliminate fabric bridging and avoid part rework.
+ Handle design applies palm pressure, reducing finger fatigue.
+ Non-contaminating material avoids FOD in layups.
@ ~ TECHNICAL DATA
. R2: UHMW PE, Natural color
Material type R3: Nylon, Black color
@ SIZES
R2 &R3 0.36 in (9.2 mm) 4.5 in (115 mm) 1.0 in (25 mm)
Airsweep R2 Airsweep R3
@ NOTES
+ Minimum order quantity: 1 each
+ The UHMW PE material in Airsweep R2 conforms to ASTM D4020-011.
+ The nylon 6/6 material in Airsweep R3 conforms to ASTM D4066 and ASTM D5989.
Last updated : 2023-06-28
Catalog position : Miscellaneous A
-Asthecondton or methods fuse, including storage ae beyond our control Altech tration nc does ot sme any responsi fe the performance of his material fo any para ue. The mater sold” A
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen A
eer ete eae at eet om ee ree Rea cre ee We eT I A
by | Sep 27, 2025
Paper or plastic?
The choice is clear.
Prep with plastic it s better than masking paper
*
.
Features and benefits:
Waterproof: not affected by rain,
dew or washwater
No paint bleed-through
Paint-flake resistant
Easy to wrap around objects
Translucent allows light to shine through
2X more per roll
*
Your reputation depends on high-quality results.
But your bottom line depends on saving time and
money. Get the best of both with 3M
Hand-Masker
Masking Plastic. This product resists bleed-through
better than 3M
Hand-Masker
General Purpose
Masking Paper. It s water and flake resistant, easy to
wrap around objects and translucent, allowing light in.
Plus, you get 2X more product per roll.
*
When used with
the 3M
Hand-Masker
M3000 Dispenser, it all adds
up to a faster, easier prep process for you and better
results for your customer.
Billing UPC Consumer UPC Shipper UPC Product # Product Description Pack/Case
000-76308-72594-5 000-76308-72594-5 500-76308-72594-0 MPL6
3M
Hand-Masker
Masking Plastic MPL6, 6 in x 120 yd
(15.2 cm x 109 m)
12/case
000-76308-72595-2 000-76308-72595-2 500-76308-72595-7 MPL9
3M
Hand-Masker
Masking Plastic MPL9, 9 in x 120 yd
(22.8 cm x 109 m)
12/case
000-76308-72593-8 000-76308-72593-8 500-76308-72593-3 MPL12
3M
Hand-Masker
Masking Plastic MPL12, 12 in x 120 yd
(30.4 cm x 109 m)
12/case
Please recycle. Printed in U.S.A. 3M 2016.
All rights reserved. 3M, Hand-Masker and the
BLUE color of the tape are trademarks of 3M.
Construction and Home Improvement Markets Division 3M Center, Building 223-4S-02, St. Paul, MN 55144-1000
1-800-494-3552 3M.com/HandMasker
70-0717-2240-2
*Compared to 3M
Hand-Masker
General Purpose Masking Paper.
Pl stico o papel?
La opci n es clara.
Prepare con pl stico es mejor que el papel de enmascarar
*
.
Su reputaci n depende de los resultados de alta calidad. Pero
sus resultados finales dependen de ahorrar tiempo y dinero.
Consiga los mejores resultados con el Pl stico de Enmascarar
3M
Hand-Masker
. Este producto resiste las filtraciones
mejor que el Papel de Enmascarar de Uso General 3M
Hand-Masker
. Es resistente al agua y al descascaramiento,
f cil de manipular para envolver alrededor de los objetos, y
transl cido, lo que permite que pase la luz. Adem s, obtiene
2 veces m s de producto por rollo
*
. Cuando se lo utiliza con
el Dispensador 3M
Hand-Masker
M3000 el proceso se
vuelve m s r pido y f cil para usted, y los resultados son
mejores para su cliente.
UPC de Facturaci n UPC de Consumidor UPC de Cart n # Producto Descripci n del Producto Paquetes/Caja
000-76308-72594-5 000-76308-72594-5 500-76308-72594-0 MPL6
Pl stico de Enmascarar 3M
Hand-Masker
MPL6,
6 in x 120 yd (15.2 cm x 109 m)
12/caja
000-76308-72595-2 000-76308-72595-2 500-76308-72595-7 MPL9
Pl stico de Enmascarar 3M
Hand-Masker
MPL9,
9 in x 120 yd (22.8 cm x 109 m)
12/caja
000-76308-72593-8 000-76308-72593-8 500-76308-72593-3 MPL12
Pl stico de Enmascarar 3M
Hand-Masker
MPL12,
12 in x 120 yd (30.4 cm x 109 m)
12/caja
Por favor, recicle. Impreso en E.U.A. 3M 2016. Todos los derechos reservados. 3M, Hand-Masker y el color AZUL de la cinta son marcas registradas de 3M.
Construction and Home Improvement Markets Division 3M Center, Building 223-4S-02, St. Paul, MN 55144-1000
1-800-494-3552 3M.com/HandMasker
70-0717-2240-2
*En comparaci n con el Papel de Enmascarar de Uso General 3M
Hand-Masker.
Caracter sticas y beneficios:
Impermeable: no lo afecta la lluvia, el roc o ni
el agua de lavado
Sin filtraciones de pintura
Resistente al descascaramiento de pintura
F cil para envolver objetos
Transl cido (permite que pase la luz)
2 veces m s por rollo
*
by | Sep 27, 2025
Freeman 266 Thermo-Stable Sheet Wax
(Adhesive Back)
Description
Formulated and manufactured by Freeman Manufacturing & Supply
Company. This product was developed for the following uses:
To simulate metal or part thickness in construction of metal
forming dies
To create two part molds requiring uniform thickness such as resin
transfer molds (RTM)
Compatible with casting & laminating resin requiring or giving off
heat during curing.
As a potting compound (encapsulating electronic components
Physical Properties
Color Medium Brown/Yellow
Thickness Tolerance +/- .002
Ring & Ball Softening Point 275 – 285 F
Ash Content 0.117%
Volumetric Expansion (68-86 C) 0.2%
Flexibility Maximum
Ordering Information
Freeman 266 Adhesive Back Hi-Temp Sheet Wax is available in sheet
sizes 12 x 24 , 8 x 8 , and 6 x 6 , with thicknesses ranging from .007
(0.18mm) to .375 (9.52mm).
The user shall determine the suitability of this product for their application and assumes all risks and
liabilities associated with the use of this product. The exclusive remedy for all proven claims is
replacement of our materials only and in no event shall Freeman Mfg. & Supply Co. be liable for
special, incidental, or consequential claims.
READ SAFETY DATA SHEETS AND PRODUCT LABELS BEFORE USING PRODUCT
by | Sep 27, 2025
Subject: FW: TECH DATA SHEET 29-865 FLOOR PAPER 60″ 80LB FLAME-A-GUARD III FR
Attachments: SDS-26 Flame-a-guard booth papers (29-843, 29-844, 29-863, 29-864, 29-865, 29-866,
29-872, 29-873, 29-874, and 29-875).pdf
From: Binks Tech Support
Sent: Friday, February 14, 2025 10:58 AM
To: Ask Binks
Subject: RE: TECH DATA SHEET 29-865 FLOOR PAPER 60″ 80LB FLAME-A-GUARD III FR
Caution! This message was sent from outside your organization. Allow sender | Block sender | Report
Flame-A-Guard I|II Flame Retardant Paper
Spray Booth Floor Paper a
* Compliant with NFPA 33 <<: fae <>
3 D vie
+ Provides quick, economical compliance ea: 72 f aa
with OSHA requirements rf. iP, (i
* White – improves booth visibility 2 ae ee A
. rapes will char but will not propagate
FLAME-A-GUARD III FLAME RETARDANT PAPER
+ Allows fast and easy booth clean-up – no
scraping, stripping or scrubbing Jpstno. / DESCRIPTION
+ Lint free 70 LB. Foot Traffic | 29-843 White, 36 x 500″
+ Eliminates tracking paint from spray | 29-844 White, 72 x S00″
booth to other plant areas 80 LB. Heavler Traffic 29-863, White, 36″ x 300
* Rolls are individually boxed for easy 29-864 White, 42 x 300
storage and shipping 29-865 White, 60 x 00
+ Increases plant efficiency and reduces 29-866 White, 72 x 300
clean-up and shutdown costs ;
100 LB. Fork Lift Traffic 29-872 White, 36 x 300
| 29-875 White, 42 x 300
| 29-873 White, 60 x 300
| 29-874 White, 72 x 300
1
by | Sep 27, 2025
Freeman 266 Thermo-Stable Sheet Wax
(Adhesive Back)
Description
Formulated and manufactured by Freeman Manufacturing & Supply
Company. This product was developed for the following uses:
To simulate metal or part thickness in construction of metal
forming dies
To create two part molds requiring uniform thickness such as resin
transfer molds (RTM)
Compatible with casting & laminating resin requiring or giving off
heat during curing.
As a potting compound (encapsulating electronic components
Physical Properties
Color Medium Brown/Yellow
Thickness Tolerance +/- .002
Ring & Ball Softening Point 275 – 285 F
Ash Content 0.117%
Volumetric Expansion (68-86 C) 0.2%
Flexibility Maximum
Ordering Information
Freeman 266 Adhesive Back Hi-Temp Sheet Wax is available in sheet
sizes 12 x 24 , 8 x 8 , and 6 x 6 , with thicknesses ranging from .007
(0.18mm) to .375 (9.52mm).
The user shall determine the suitability of this product for their application and assumes all risks and
liabilities associated with the use of this product. The exclusive remedy for all proven claims is
replacement of our materials only and in no event shall Freeman Mfg. & Supply Co. be liable for
special, incidental, or consequential claims.
READ SAFETY DATA SHEETS AND PRODUCT LABELS BEFORE USING PRODUCT
by | Sep 27, 2025
Freeman 266 Thermo-Stable Sheet Wax
(Adhesive Back)
Description
Formulated and manufactured by Freeman Manufacturing & Supply
Company. This product was developed for the following uses:
To simulate metal or part thickness in construction of metal
forming dies
To create two part molds requiring uniform thickness such as resin
transfer molds (RTM)
Compatible with casting & laminating resin requiring or giving off
heat during curing.
As a potting compound (encapsulating electronic components
Physical Properties
Color Medium Brown/Yellow
Thickness Tolerance +/- .002
Ring & Ball Softening Point 275 – 285 F
Ash Content 0.117%
Volumetric Expansion (68-86 C) 0.2%
Flexibility Maximum
Ordering Information
Freeman 266 Adhesive Back Hi-Temp Sheet Wax is available in sheet
sizes 12 x 24 , 8 x 8 , and 6 x 6 , with thicknesses ranging from .007
(0.18mm) to .375 (9.52mm).
The user shall determine the suitability of this product for their application and assumes all risks and
liabilities associated with the use of this product. The exclusive remedy for all proven claims is
replacement of our materials only and in no event shall Freeman Mfg. & Supply Co. be liable for
special, incidental, or consequential claims.
READ SAFETY DATA SHEETS AND PRODUCT LABELS BEFORE USING PRODUCT
