POLYURETHANE SPECIALIST
1000 South Linwood Avenue, Santa Ana, CA 92705 Date: = 11/24/18
Phone: (714) 480-1370, Fax: (714) 558-1990
F 7209 Yellow
Product Information
F 7209 Yellowis a high performance, Medium density flexible polyurethane foam designed for
processing through plural component low or high pressure dispensing equipmentor hand-mix. Once
fully cured, this material is tough and flexible. F 7209 Yellow is designed for use in applications where
tough skin is required with good memory and with excellent physical properties.
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 400 – 600 900 -1300
Specific Gravity (gr/ml) 1.12-1.15 1.07 – 1.09
Physical Properties (Final Product)
Tensile Strength (psi), ASTM D-638 N/A
Elongation (%), ASTM D-638 NIA
Tear Strength (pli), ASTM D1004 N/A
Handling Characteristics
Mix Ratio by Weight (Component A/Component B) 50/50 45/55 40/60
Mix Ratio by Volume (Component A/Component B) N/A
Cream Time (sec) 35-45
Rise Time (sec) 120 – 140
Tack Free Time (sec) 130 – 150
Demold Time (min) 10
Final Cure Time (hours) 1
Density (pcf) 10.0- 12.0
Storage and Shelf Life
Components A and B should be kept well sealed in a dry place at a temperature from75*- 90 F.
Shelf life of unopened containers is six (6) months from manufacturing date. Purge opened
containers with dry nitrogen before resealing. Premix component B prior to use. Referto product
MSDS for more information.
Packaging
Component A: 55 gallon steel drum (closed top) 500 Ibs Net Weight
Component B: 55 gallon steel drum (open top) 450 Ibs Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.