25HP8203A-D_TDS.pdf

HP 8203
TECHNICAL DATA SHEET
INC. Rigid Foam Polyurethane System
POLYURETHANE SPECIALIST 4
Product Information RoHS
HP 8203 is a low density rigid polyurethane molding foam system designed for processing through
plural component dispensing equipment. Once fully cured, this material is tough with high compression
and tensile value. HP 8203 exhibits very good surface characteristics and excellent moldability. HP
8203 is used in a variety of applications including vessel flotation, coverings and various applications.
This material is Eco Friendly due to its lack of HCFC s, HFC s, and lead or other heavy metals.
[Compressive Strength psi | ASTM D-1621 [45-50 |
[Tensile Strength psi ASTM D-1623 TO <50 | [ShearStrength psi ASTM D273 [35-40 | [Elongation TT ASTM D623 [OO [Closed CellContent_ TT ASTM 2856 [= | [___Handling Characteristics [Units [Component A [Component B | [Color Amber Opaque/Beigessh| *Properties are typical and not for specifications* Storage and Shelf Life Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with dry nitrogen before resealing. Refer to product SDS for more information. Packaging Component A: 55 gallon steel drum (closed top) 500 Ib Net Weight 275 gallon plastic totes 2500 Ib Net Weight Component B: 55 gallon steel drum (open top) 450 Ib Net Weight 275 gallon plastic totes 2250 Ib Net Weight For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com www.etecoinc.com Non-Warranty: This information is fumished without waranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.