80POLYTEX2_SDS.pdf

# SAFETY DATA SHEET
5 “s symptoms persist
1. Identification Ingestion: Do not induce vomiting unless directed to do so by medical
Product Identifier: _1728C Epoxy Resin personnel. Get medical attention.
Polytex 1 Epoxy Resin Most Important Symptoms/Effects: Causes serious eye irritation.
Polytex 41 Epoxy Resin May cause an allergic skin reaction.
Polytex XI Epoxy Resin Indication of Immediate Medical Attention/Special Treatment: If
Polytex XI Flow Epoxy Resin product gets in eyes, immediately flush with water.
Use: Epoty Resin. For Industrial/Professional use s. Fire-Fighting Measures
Manufacturer: B.D. Classic Enterprises Extinguishing Media: Use water fog, foam, carbon dioxide or dry
275 Bridgepoint Way chemical. Do not use solid water stream. Solid stream of water into hot
South St. Paul, MN 55075 product may cause violent steam generation or spread fire.
Phone Number: 877-556-0559 Specific Hazards: Not classified as flammable or combustible. Product
Emergency Phone: CHEMTREC 800-424-9300 or will bum under fire conditions. Combustion products include oxides of
+1 703-527-3887 carbon, phenolics, aldehydes and other toxic organic compounds.
E-mail: info@bdclassic.com Special Protective Equipment & Precautions for Fire-Fighters: Wear
positive pressure, self-contained breathing apparatus and full-body
2. Hazards Identification protective clothing.
Ope Tstinea cvegory 2 6. Accidental Release Measures
Skin Irritation Category 2 Personal Precautions, Protective Equipment and Emergency
Skin Sensitizer Category 1 Procedures: Clear unnecessary, unprotected personnel from the area.
. Wear appropriate protective clothing to prevent eye and skin contact and
Label Elements: Warning avoid beatin vapors.
Methods and Materials for Containment and Cleanup: Cover with an
inert absorbent material and collect into an appropriate container for
Hazard Phrases disposal. Avoid releases to the environment. Dispose of in accordance
H315 Causes skin irritation, with applicable local and federal environmental laws and regulations.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation. 7. Handling and Storage
Precautionary Phrases Safe Handling: Use with adequate ventilation. Avoid contact with eyes,
P261 Avoid breathing mist, vapor, or spray. skin, and clothing. Wash thoroughly after handling. Do not eat, drink, or
P264 Wash hands thoroughly after handling. smoke in the work area. Keep container closed when not in use.
P272 Contaminated work clothing should not be allowed out of the | Safe Storage: Store indoors at temperatures below 120 F (49 C). Store
work area. | in original containers. Avoid getting moisture into containers. Keep
P280 ~ – Wear protective gloves/protective clothing/eye protection/face | containers tightly closed.
rotection.
P302 + p35? IF ON SKIN: Wash with plenty of soap and water. 8. Exposure Controls/Personal Protection
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several | Occupational Exposure Limits: None established.
minutes. Remove contact lenses, if present and easy to do. ath : a
Continue rinsing. Ventilation: Use with adequate general or local exhaust ventilation to
P333 + P313 If skin irritation or rash occurs: Get medical advice or muniiiize exposure love’s. , . .
attention. Respiratory Protection: If needed, an approved respirator with organic
P337+P313 If eye irritation persists: Get medical advice or attention. vapor cartridges may be used. Respirator selection and use should be
P362+P364 Take off contaminated clothing and wash before reuse. based on contaminant type, form, and concentration. For higher exposures
P501 Dispose of contents and container in accordance with local, or in an emergency, use a supplied-air respirator. _
regional and national regulations. Skin Protection: Wear impervious gloves, such as butyl rubber or nitrile
Supplemental Information: Read and understand the hazard rubber .
information on Epoxy Hardener before using. Eye Protection: Wear chemical safety glasses/goggles.
Other Protective Measures: Prevent skin contact and contamination of
3. Composition/Information on Ingredients personal clothing. An eye wash facility and washing facility should be
available in the work area. Follow applicable regulations and good
Industral Hygiene practice.
hazards, or are present below cut-off/concentration limits. Appearance: Liquid, clear
Odor: Epoxy
4. First-Aid Measures Odor Threshold: No data available
Eye Contact: Rinse thoroughly with water, holding the eyelids open to | PH: No data available
be sure the material is washed out. Remove contact lenses if safe and Melting Point: No data available
easy to do. Continue rinsing. Get medical attention if irritation persists. Boiling Point: No data available
Skin Contact: Remove contaminated clothing. Wash contact area Flash Point: >205 F
thoroughly with soap and water. Get medical attention if irritation Evap. Rate: No data available
persists. Upper/Lower Flammability Limits: No data available
Inhalation: Remove person to fresh air. Get medical attention if Vapor Pressure: No data available
Date Prepared/Revised: September 7, 2021; Supersedes: September 3 2021
XAEHSBDCRevised SDSII728C_Polytex | Epoxy Resin docx