TECHNICAL DATA SHEE T
STRETCH- VAC
2000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV2000_0 2.21_Issue1
STRETCH- VAC 2000
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Soft, co-extruded, ultra high elongation, multi layered
film, produced from a modified polyamide resin.
Easily conformable for complex contoured parts,
formulated to be less affected by environmental
changes and remains flexible in low humidity
conditions.
Recommended as a bagging film for advanced
composite fabrication, when a dependable,
conformable, soft, stretchable bag is required.
Fewer pleats are needed when vacuum bagging
either complex or simple contoured parts, due to its
unique characteristics.
Manufactured using advanced state-of-the-art
blown film technology.
Can be heat seamed to meet any custom shape
requirements.
PROPERTIES
Maximum use temperature 204 C 400 F
Color Red and transparent
Tensile strength at break (ASTM D882) 103.42 MPa 15000 PSI
Elongation at break (ASTM D882) 400%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45Kg Up to 100lb
Widths Up to 4.06m (open) Up to 160in (open)
Formats available Lay-flat tube, sheet, V sheet
STORAGE
Stretch-Vac 2000 is hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use
is therefore an important factor for successful performance. The higher the moisture content the more flexible they become.
Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends
TECHNICAL DATA SHEE T
STRETCH- VAC
2000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV2000_0 2.21_Issue1
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.