TECHNICAL DATA SHEE T
HALAR
ECTFE
Release Film
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS HALAR ECTFE _02.21_Issue1
HALAR ECTFE
HALAR films offer both strength and high elongation, making them ideal for the vacuum bagging
process of composite parts.
Features and Benefits
High strength, high elongation, low density release
film
Ideal for use in vacuum bag/autoclave processing of
composites
Industry standard product for many years,
particularly in the 125 – 160 C curing range
Suitable for use with polyester, epoxy and phenolic
resin systems
Do not leave any residue when peeled off
Available in white or blue, for ease of identification on
the cured laminate
Available perforated or not perforated. When
perforated, the perforation allows for solvent or excess
resin evacuation
Can act as water and moisture barrier making it ideal
as vacuum bagging protective layer when curing
phenolic resins
PHYSICAL PROPERTIES
Maximum use temperature 160 C
Standard Perforations P1, P3, P6
Colour White or Blue
Density 1.68g/cm
3
Elongation 280%
Melt point 240 C
Flammability Non-flammable
AVAILABILITY & PACKAGING
Thickness 0.0127mm
Yield 47m
2
/kg
Weight (nominal) 4.7kg/roll
Roll size 1.22m wide x 183m long
Core size 76mm
STORAGE & HANDLING
Store in original packaging
No handling problems experienced
TECHNICAL DATA SHEE T
HALAR
ECTFE
Release Film
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS HALAR ECTFE _02.21_Issue1
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.