VACUUM BAG SUPPLIES | Revchem Composites https://www.revchem.com Composite Solutions... Delivered Daily Mon, 22 Jun 2026 12:08:10 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.1 https://www.revchem.com/wp-content/uploads/sites/2/cropped-114x114-rev-32x32.png VACUUM BAG SUPPLIES | Revchem Composites https://www.revchem.com 32 32 08WLEASE2_TDS.pdf https://www.revchem.com/document/08wlease2_tds-pdf/ Sat, 27 Sep 2025 09:40:11 +0000 https://revchem.com/document/08wlease2_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
y a lan Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLEASE
Extruded fluoropolymer pressure sensitive tape
DESCRIPTION
Wrightlease is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. The orange
color is highly visible on most substrates in addition to offering high elongation and tensile strength.
@ BENEFITS
+ Provides excellent release from all common resin systems for multiple releases.
+ Good adhesion to metal, composite, tooling block and rubber tooling.
+ High elongation allows for easier covering of complex contour surfaces.
@ TECHNICAL DATA
Technical Data Wrightlease 2 Wrightlease 4
Maximum use temperature 500 F (260 C) 500 F (260 C)
Carrier type Extruded fluoropolymer Extruded fluoropolymer
Adhesive type Silicone Silicone
Color Orange Orange
Total thickness 0.0035 inch (88 1m) 0.0055 inch (138 tm)
Film thickness 0.002 inch (50 um) 0.004 inch (100 ym)
Adhesive thickness 0.0015 inch (38 ym) 0.0015 inch (38 ym)
Elongation at break 350% 350%
M@ SHELF LIFE
18 months from date of shipment when stored in original packaging at 72 F (22 C)
COMMONLY USED SIZES
1 inch (2.54 cm) 36 yards (33 m) 48 rolls per case
2 inches (5.08 cm) 36 yards (33 m) 24 rolls per case
+ Broken cases and other widths available on special order.
@ NOTES
+ Available in 1 in x 2 in (2.54 cm x 5.08 cm) “cut strips” on a liner.
+ For requirements wider than 4 inches (10.16 cm), it is recommended to use Toolwright 3 product which
has a release liner so it can be easily unwound from the roll without distortion.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use. Last updated : 2023-06-28
Catalog position : Pressure sensitive tapes
the conditions or methods fuse Inching storage, ae beyond out contol Artech Intemational does not ese ay regan othe performance of material fo any para we Te mate soda
Artech Iematonal ic decals and bye wanes any anda pled varates nung witout tain the mpd waranles of mertantablty nd of fnes fo partcar use. he nfermaton contained heen
epresets tpl proper and hod nob aed fo specication pupose Ary vansation povided fr Your camvelecs on. me oil anuage Engi an he oficial Calf, USK

]]> 08WLEASE22_TDS.pdf https://www.revchem.com/document/08wlease22_tds-pdf/ Sat, 27 Sep 2025 09:40:10 +0000 https://revchem.com/document/08wlease22_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLEASE
Extruded fluoropolymer pressure sensitive tape
lM DESCRIPTION
Wrightlease is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. The orange colour is
highly visible on most substrates in addition to offering high elongation and tensile strength.
@ BENEFITS
+ Provides excellent release from all common resin systems for multiple releases.
+ Good adhesion to metal, composite, tooling block and rubber tooling.
+ High elongation allows for easier covering of complex contour surfaces.
M@ TECHNICAL DATA
Wrightlease 2 Wrightlease 2R Wrightlease 4
Maximum use temperature 260 C (500 F) 204 C (400 F) 260 C (500 F)
Carrier type Extruded fluoropolymer Extruded fluoropolymer Extruded fluoropolymer
Adhesive type Silicone Rubber Silicone
Elongation at break 350% 300 % 350%
Light orange substrate
Coleen Cenge Green or white adhesive Crag
Total thickness 88 ym (0.0035 inch) 88 um (0.0035 inch) 138 tm (0.0055 inch)
Film thickness 50 ym (0.002 inch) 50 um (0.002 inch) 100 tm (0.004 inch)
Adhesive thickness 38 um (0.0015 inch) 38 um (0.0015 inch) 38 um (0.0015 inch)
Shelf life 18 months from date of shipment when stored in original
packaging at 22 C (72 F)
lM SIZES
Wrightlease 2 Wrightlease 2R Wrightlease 4
2.54 cm – 33 m (1 – 36 yards) 2.54 cm – 33 m (1 – 36 yards) 2.54 cm – 33 m (1″ – 36 yards)
48 rolls/case 48 rolls/case 48 rolls/case
5.08 cm – 33 m (2″ – 36 yards) 5.08 cm – 33 m (2″ – 36 yards) 5.08 cm – 33 m (2″ – 36 yards)
24 rolls/case 24 rolls/case 24 rolls/case
+ Available in 2.54 cm 5.08 cm (1 – 2″) “cut strips” on a liner.
+ Broken cases and other widths available on special order.
SUSTAINABILITY
packaging
wy
M@ NOTES
+ For requirements wider than 10.16 cm (4″), it is recommended to use Toolwright 3 product which
has a release liner so it can be easily unwound from the roll without distortion.
+ The maximum use temperature is dependent upon the duration at maximum temperature and is
process specific, Airtech recommends testing prior to use.
Last updated : 2025-02-07
Catalog position : Pressure sensitive tapes
ste contin creo ue nding sarge eyed ot conta itech trator doe tse pony for the pevomnance fh mae for ry arr. The mates sols Artech inteton n
]]> 08WL8400D_TDS.pdf https://www.revchem.com/document/08wl8400d_tds-pdf/ Sat, 27 Sep 2025 09:40:07 +0000 https://revchem.com/document/08wl8400d_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 8400
Nylon vacuum bagging film
lM DESCRIPTION
Wrightlon 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven
performance. It is called out on many aerospace specifications for use temperatures up to 232 C (450 F). It is
recommended for cures with phenolic resins.
@ BENEFITS
+ Heat resistance provides vacuum security during high temperature cures of expensive parts.
+ Proven performance and approvals on specifications worldwide gained over more than 30 years.
+ High strength and chemical resistance reduces bag failures with aggressive phenolic resins.
M@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 350% ASTM D 882
Tensile strength 62 MPa (9000 psi) ASTM D 882
Maximum use temperature 232 C (450 F)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Strong oxidizers
Colour Blue
Recommended Storage temperature is 5 C to 40 C (41 F to 104 F) at no less
Storage than 25% relative humidity. Store indoors in original packaging, do not stack
rolls on end.
Optimal usage conditions are in a Relative Humidity range from 50% to
Users 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining
9 soft at higher %rh and at risk of become stiffer in low %rh, see “Hydrate
bagging films” TDS.
SIZES
Forms Avalable
50 um (0.002 inch) up to 3.66 m (144 inches) SHT, CF, LFT
75 um (0.003 inch) up to 4.57 m (180 inches) SHT, CF, LFT
+ For more sizes, see the Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing SUSTAINABILITY Contains a>
can b N PS Recyclable
We: c ym) pan: eral QV packaging
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2025-04-15
Catalog position : Bagging films
ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n
]]> 08WL8400B_TDS.pdf https://www.revchem.com/document/08wl8400b_tds-pdf/ Sat, 27 Sep 2025 09:40:06 +0000 https://revchem.com/document/08wl8400b_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 8400
Nylon vacuum bagging film
lM DESCRIPTION
Wrightlon 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven
performance. It is called out on many aerospace specifications for use temperatures up to 450 F (232 C). It is
recommended for cures with phenolic resins.
@ BENEFITS
+ Heat resistance provides vacuum security during high temperature cures of expensive parts.
+ Proven performance and approvals on specifications worldwide gained over more than 30 years.
+ High strength and chemical resistance reduces bag failures with aggressive phenolic resins.
M@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 350% ASTM D 882
Tensile strength 9000 psi (62 MPa) ASTM D 882
Maximum use temperature 232 C (450 F)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Strong oxidizers
Colour Blue
P Unlimited when stored in original
Sallie packaging at 72 F (22 C)
@ SIZES
Forms Available
0.002 inch (50 ym) up to 144 inches (3.66 m) SHT, CF, LFT
0.003 inch (75 um) up to 180 inches (4.57 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing M@ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. Last updated : 2024-06-28 Catalog position : Bagging films 4 ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n 4 ]]> 08WL8400A_TDS.pdf https://www.revchem.com/document/08wl8400a_tds-pdf/ Sat, 27 Sep 2025 09:40:05 +0000 https://revchem.com/document/08wl8400a_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 8400
Nylon vacuum bagging film
lM DESCRIPTION
Wrightlon 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven
performance. It is called out on many aerospace specifications for use temperatures up to 450 F (232 C). It is
recommended for cures with phenolic resins.
@ BENEFITS
+ Heat resistance provides vacuum security during high temperature cures of expensive parts.
+ Proven performance and approvals on specifications worldwide gained over more than 30 years.
+ High strength and chemical resistance reduces bag failures with aggressive phenolic resins.
M@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 350% ASTM D 882
Tensile strength 9000 psi (62 MPa) ASTM D 882
Maximum use temperature 232 C (450 F)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Strong oxidizers
Colour Blue
P Unlimited when stored in original
Sallie packaging at 72 F (22 C)
@ SIZES
Forms Available
0.002 inch (50 ym) up to 144 inches (3.66 m) SHT, CF, LFT
0.003 inch (75 um) up to 180 inches (4.57 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Slit *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing M@ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. Last updated : 2024-06-28 Catalog position : Bagging films 4 ste contin creo ue nding sarge beyond ot conta itech tration oe et sume pony fo the peronnnce fh mae for ry arr. The mates sols Artech intetonl n 4 ]]> 08WL5400F_TDS.pdf https://www.revchem.com/document/08wl5400f_tds-pdf/ Sat, 27 Sep 2025 09:40:03 +0000 https://revchem.com/document/08wl5400f_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA

Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a video of Wide Films in the "Media Center" on our website. Last updated : 2023-06-06 Catalog position : Bagging films a Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA

]]> 08WL5400D_TDS.pdf https://www.revchem.com/document/08wl5400d_tds-pdf/ Sat, 27 Sep 2025 09:40:02 +0000 https://revchem.com/document/08wl5400d_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA

Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a video of Wide Films in the "Media Center" on our website. Last updated : 2023-06-06 Catalog position : Bagging films a Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA

]]> 08WL5400E_TDS.pdf https://www.revchem.com/document/08wl5400e_tds-pdf/ Sat, 27 Sep 2025 09:40:02 +0000 https://revchem.com/document/08wl5400e_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA

Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a video of Wide Films in the "Media Center" on our website. Last updated : 2023-06-06 Catalog position : Bagging films a Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA

]]> 08WL5400C_TDS.pdf https://www.revchem.com/document/08wl5400c_tds-pdf/ Sat, 27 Sep 2025 09:40:00 +0000 https://revchem.com/document/08wl5400c_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA

Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a video of Wide Films in the "Media Center" on our website. Last updated : 2023-06-06 Catalog position : Bagging films a Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA

]]> 08WL5400B_TDS.pdf https://www.revchem.com/document/08wl5400b_tds-pdf/ Sat, 27 Sep 2025 09:39:59 +0000 https://revchem.com/document/08wl5400b_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA

Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a video of Wide Films in the "Media Center" on our website. Last updated : 2023-06-06 Catalog position : Bagging films a Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA

]]> 08WL5400A_TDS.pdf https://www.revchem.com/document/08wl5400a_tds-pdf/ Sat, 27 Sep 2025 09:39:58 +0000 https://revchem.com/document/08wl5400a_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
ya an Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA

Data Sheet WRIGHTLON 5400
Nylon vacuum bagging film
Hi DESCRIPTION
Wrightlon 5400 is a nylon bagging film with good elongation for cure temperatures up to 356 F (180 C).
@ BENEFITS
+ Inexpensive film with good heat resistance reduces the cost of curing.
+ Wide range of available sizes means excess and film waste can be minimized.
+ Easy to work with, providing good vacuum levels for good quality parts.
f@ TECHNICAL DATA
Test method
Material type Nylon
Elongation at break 375% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 356 F (180 C)
Flammability (self extinguishing) Yes ATP-5034
Materials to avoid Phenolic resins/Strong oxidizers
Color Clear
. Unlimited when stored in original
Shelf life packaging at 72 F (22 C)
lM SIZES
Forms Available
0.002 inch (50 um) up to 280 inches (7.11 m) SHT, CF, LFT
0.003 inch (75 um) up to 280 inches (7.11 m) SHT, CF, LFT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
< Siit Open Edge *SHT=Sheeting CF=Centerfold LFT=Lay-Flat GT=Gusseted G=Gusseted Tubing Tubing @ NOTES + The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use. + Watch a video of Wide Films in the "Media Center" on our website. Last updated : 2023-06-06 Catalog position : Bagging films a Aste condtions or methods fue induding sorge ae beyond our contro Asch nematonl ln does ot sume ay respi fr the perlomance of is mate for ny pric we. The tess sold itech nteratonal ine Sims. and buyer wie, ny and at mpeg wares ncng wiht kttion he pind worsbes of meray ado fines fe parca. The fomasoncomanedharen represen pc propery rd hoo ot be ed fr petition purpose An Waton prove flr your convenience ony The ical nguageb Engin and the efi ateri USA

]]> 08WL5200D_TDS.pdf https://www.revchem.com/document/08wl5200d_tds-pdf/ Sat, 27 Sep 2025 09:39:57 +0000 https://revchem.com/document/08wl5200d_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA

]]> 08WL5200B_TDS.pdf https://www.revchem.com/document/08wl5200b_tds-pdf/ Sat, 27 Sep 2025 09:39:56 +0000 https://revchem.com/document/08wl5200b_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA

]]> 08WL5200C_TDS.pdf https://www.revchem.com/document/08wl5200c_tds-pdf/ Sat, 27 Sep 2025 09:39:56 +0000 https://revchem.com/document/08wl5200c_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA

]]> 08WL5200BP3B_TDS.pdf https://www.revchem.com/document/08wl5200bp3b_tds-pdf/ Sat, 27 Sep 2025 09:39:55 +0000 https://revchem.com/document/08wl5200bp3b_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA

]]> 08WL5200BP3A_TDS.pdf https://www.revchem.com/document/08wl5200bp3a_tds-pdf/ Sat, 27 Sep 2025 09:39:54 +0000 https://revchem.com/document/08wl5200bp3a_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA

]]> 08WL5200A_TDS.pdf https://www.revchem.com/document/08wl5200a_tds-pdf/ Sat, 27 Sep 2025 09:39:53 +0000 https://revchem.com/document/08wl5200a_tds-pdf/ 5700 Skylab Road Phone : +1 714-899-8100 E-mail : airtech@airtech.com
f loa Huntington Beach Fax: +1 714-899-8179 Website : www.airtech.com
INTERNATIONAL INC. CA 92647 USA
Data Sheet WRIGHTLON 5200
High performance fluoropolymer release film
DESCRIPTION
Wrightlon 5200 release film has an excellent elongation which ensures that it will conform to complex
curvatures. It is capable of cure temperatures up to 500 F (260 C). This film will release from most resin systems
and will provide a glossy finish when used directly on the laminate. All standard perforations are available.
Please see our perforation table in this section.
@ BENEFITS
+ Good elongation and strength reduces tearing and bridging in corners, so less rework on resin rich corners.
+ Wider films reduce seams yielding faster bagging and safer cures for large parts.
+ High visibility colors reduces risk of leaving film on cured parts or confusion between perforation styles.
@ ~ TECHNICAL DATA
Test method
Material type ETFE
Elongation at break 350% ASTM D 882
Tensile strength 7000 psi (48 MPa) ASTM D 882
Maximum use temperature 500 F (260 C)
Materials to avoid Compatible with most resin systems.
Color Blue/Red/Clear
Shelf life Unlimited when stored in original packaging at 72 F (22 C)
@ SIZES
Forms Available
0.0006 inch (15 um) up to 48 inches (1.22 m) SHT
0.001 inch (25 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 60 inches (1.52 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
NOTES
+The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
+ Wrightlon 5200 is available treated inside (TIS), outside (TOS), or both sides (TBS). Shelf life is 18 months
from date of shipment when stored in original packaging at 72 F (22 C).
Last updated : 2020-02-11
Catalog position : Release films
-Asthecondton or methods fuse, lncluing storage, ae beyond our control Altach ternational nc does ot sume any espns fe the performance of his material fo any parca ue. The mater is sld”s
Artech eration ne dclsne and buyer waive, any analimpled warantesincidg without mtn the pled warns of merchant and of ness fo pata use. The formation contaned heen
teptesents ypc properties and should nat be used for specication purposes Any tnsstio provide or yout convenience ony The afi anguages English andthe ofa law Calf, USA

]]> 08WL4600_TDS.pdf https://www.revchem.com/document/08wl4600_tds-pdf/ Sat, 27 Sep 2025 09:39:52 +0000 https://revchem.com/document/08wl4600_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF = CA 92647 USA
INTERNATIONAL INC.
Data Sheet WRIGHTLON 4600
Cost effective polyolefin copolymer release film
lM DESCRIPTION
Wrightlon 4600 release film is a low cost high temperature film for use in flat or limited curvature molding
applications up to 380 F (193 C). It will release from epoxy and phenolic resin systems. All standard perforations are
available. Please see our perforation table in this section.
@ BENEFITS
+ Inexpensive film reduces the cost of high temperature vacuum bagging process.
+ Flat film can be applied quickly and without wrinkles over simple tooling and part shapes.
+ Highly visible colour reduces risk of leaving film on cured parts.
M@ TECHNICAL DATA
Test method
Material type PMP.
Elongation at break 250% ASTM D 882
Tensile strength 3400 psi (23 MPa) ASTM D 882
Maximum use temperature 193 C (380 F)
Materials to avoid Polyester and vinyl ester resins
Colour Blue/Clear
Shelf life Unlimited when stored in original packaging at 22 C (72 F)
SIZES
Forms Available
0.0015 inch (38 ym) up to 120 inches (3.05 m) SHT, CF
0.002 inch (50 um) up to 54 inches (1.37 m) SHT
+ For more sizes, see the Commonly Used Sizes chart in this section.
+ Custom shapes and sizes are available, please contact Airtech for more information.
*SHT=Sheeting CF=Centerfold
@ NOTES
+ The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2024-05-22
Catalog position : Release films
ste conditions ceo ue nding sarge beyond ot cota itech tration oe ese pony for the peronnnce fh mate fr ry arr. The mates sols Artech inten ne 4
]]> 08VVBBV25A_TDS.pdf https://www.revchem.com/document/08vvbbv25a_tds-pdf/ Sat, 27 Sep 2025 09:39:51 +0000 https://revchem.com/document/08vvbbv25a_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail: airtech@airtech.com
iT Huntington Beach Fax: + 1 714-899-8179 Website: www.airtech.com
fF Ls CA 92647 USA
INTERNATIONAL INC.
Data Sheet VAC VALVE BBV
Self cutting vacuum valve
lM DESCRIPTION
Vac Valve BBV is a 2 piece vacuum valve which perforates the bagging film when the top piece is inserted and
threaded into the base plate. The specific design of the threaded connection eliminates the need to cut the bagging
film prior to inserting the top piece. Vac Valve BBV will operate for vacuum bagging applications from room
temperature up to 500 F (260 C).
M@ BENEFITS
+ Small diameter allows for use in space constrained areas.
+ Simple economical design keeps plumbing costs under control.
+ Beaded base plate provides extra seal pressure and vacuum seal safety.
@ TECHNICAL DATA
Construction 2 pieces: base plate, threaded top piece
Material type Aluminum base plate carbon steel upper detail
Material type of gasket Silicone
Screw thread 1/4 inch male NPT
Assembly style Screw down
Service temperature 260 C (500 F)
@ SIZES
Product Reference Base Plate Shape Base Plate Diameter
Vac Valve BBV Round 1.9 inches (48 mm)
DIRECTIONS FOR USE
+ Insert the base under the vacuum bag.
+ Screw the top piece into the base plate. Unscrew and remove the bag film chad.
+ Screw the top piece all the way down into the base sealing onto the bag film.
Last updated : 2024-09-30
Catalog position : Vacuum valves and hoses
ste conditions creat ue nding sarge beyond ot cota itech trator does ese pony for the pevonnnce fhe for ry arr. The mates sols Artech inten ne
]]> 08VV409_TDS.pdf https://www.revchem.com/document/08vv409_tds-pdf/ Sat, 27 Sep 2025 09:39:50 +0000 https://revchem.com/document/08vv409_tds-pdf/ 5700 Skylab Road Phone: +1 714-899-8100 E-mail : airtech@airtech.com
#’ lan Huntington Beach Fax: +1 714-899-8179 Website : wwwaairtech.com
INTERNATIONAL INC. CA92647 USA
Data Sheet VAC VALVE 409 SS HTR
Stainless steel vacuum valve for cures up to 900 F (482 C)
DESCRIPTION
Vac Valve 409 SS HTR was designed for high temperature cures where valves with silicone rubber seals
breakdown. The Vac Valve 409 SS HTR utilizes the bagging film along with mechanical pressure to create an air
tight seal. The bagging film is clamped between the ridged base plate and the holding ring with contra shape.
fi =BENEFITS
+ Screw down seal design provides extra vacuum seal safety.
+ High quality components ensure good seals and safe vacuum bags.
+ Clamping ring design eliminates gasket, allowing higher temperature usage.
= =TECHNICAL DATA :
Construction 3 pieces: base plate, pressure plate, locking ring
Material type Stainless steel _
Screw thread 1/4 inch male NPT
Assembly style Screw down
Service temperature 900 F (482 C)
M SIZES =
? __) Product Reference Base Plate Diameter
Vac Valve 409 SS HTR : 2.50 inches (63 mm)
a rs
DIRECTIONS FOR USE
+ Insert the base plate under the vacuum bag.
+ Cut a small opening in the vacuum bag and push the stem through the opening.
+ Apply the pressure plate on the outside of the vacuum bag and screw down the locking ring.
@ NOTES
+ This vacuum valve can be used with our AHTC-1000 QTD high temperature quick disconnect
and our Airflow 800 high temperature autoclave hoses.
Last updated : 2016-08-18
Catalog position : Vacuum valves and hoses s 7
the condos or methods fencing stage, at beyond ou contol Asch temtonal in. does ot se ay responsi fer he pefomanc of his materi aay pace The ati so”
Ainechtratnat i: ductus, anbuyer wanes ay an a mpeg naman adidg wou ratte pled warner netchueatny sd ol ies parce, The ndrmaton conta her
represen pc proper snd hou not be fed fr speticon pups. Ay tanaton proves” you convesnce ony, Te ica anguages Egan and teeta aw caso USA

]]>